-----Message d'origine-----
De?: [email protected] <[email protected]> De la part de Peter Gottlieb via groups.io
贰苍惫辞测é?: 21 mars 2025 09:02
??: [email protected]
Objet?: [HP-Agilent-Keysight-equipment] 33210A load waveform over Ethernet

?

Just wondering if anyone has experience loading a one-shot retriggerable waveform over Ethernet into a 33210A arbitrary waveform generator.

?

I'd love to hear the Reader's Digest version of how I can do this.

?

I need 10k points at a rate of 1 or 10 kHz.

?

Peter

?

?

?

?

Hi Peter,

?

I don’t have 33210A, but it’s same thing with an 33220A.

?

I used the free Agilent IntuiLink Waveform Editor software.

In the File Properties menu, I chose the number of points; here it was 10,000.

I added some basic shapes to get 10,000 points.

?

I sent everything to volatile memory for testing (you can choose volatile or non-volatile). The frequency was 1 kHz and 1 Vpp.

?

The generator's mode is ARB, with BURST mode enabled; choose 1 cycle only.

?

Trigger setup: set it to manual mode.

?

You can trigger manually by pressing the TRIG button, or send the GPIB command *TRG

?

Yves

?

?

?

?

?

?

?

-----Message d'origine-----
De?: [email protected] <[email protected]> De la part de Peter Gottlieb via groups.io
贰苍惫辞测é?: 21 mars 2025 09:02
??: [email protected]
Objet?: [HP-Agilent-Keysight-equipment] 33210A load waveform over Ethernet

?

Just wondering if anyone has experience loading a one-shot retriggerable waveform over Ethernet into a 33210A arbitrary waveform generator.

?

I'd love to hear the Reader's Digest version of how I can do this.

?

I need 10k points at a rate of 1 or 10 kHz.

?

Peter

?

?

?

?