Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Looking for 54300A operating and service manual
|
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> on behalf of Peter Gottlieb via groups.io <hpnpilot@...>
Sent: Thursday, February 20, 2025 2:17 PM To: [email protected] <[email protected]> Subject: [HP-Agilent-Keysight-equipment] Looking for 54300A operating and service manual ?
Nothing on Keysight, no luck with a web search.? I have the operating
and programming manual but it doesn't help. What I'm really after is the pinout for the plug in modules as I would like to use them stand-alone. Peter |
|
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> on behalf of scm325 <Highpwr@...>
Sent: Thursday, February 20, 2025 5:40 PM To: [email protected] <[email protected]> Subject: Re: [HP-Agilent-Keysight-equipment] Looking for 54300A operating and service manual ?
From: [email protected] <[email protected]> on behalf of Peter Gottlieb via groups.io <hpnpilot@...>
Sent: Thursday, February 20, 2025 2:17 PM To: [email protected] <[email protected]> Subject: [HP-Agilent-Keysight-equipment] Looking for 54300A operating and service manual ?
Nothing on Keysight, no luck with a web search.? I have the operating
and programming manual but it doesn't help. What I'm really after is the pinout for the plug in modules as I would like to use them stand-alone. Peter |
|
Thanks, but that is the operating and programming manual which, as I stated, does not have the information I seek.
toggle quoted message
Show quoted text
Peter On 2/20/2025 8:40 PM, scm325 via groups.io wrote:
|
开云体育I am specifically looking to use the 54003A input modules standalone so am looking for the pinout. There are 6 pins plus a 50 ohm coaxial output.? As there is a LM308 in there next to the hybrid I could identify the +V and -V pins, know two are NC and one a ground, so just wonder: 1)? What is the other pin 2)? What are the + and - voltages? (12? 15? or what?) That's about it. Peter
On 2/21/2025 9:14 AM, Peter Brown via
groups.io wrote:
|
|
Your stash must be a gold mine. You're doing a great service, thanks! On Fri, Feb 21, 2025, 15:14 Peter Brown via <peter=[email protected]> wrote:
|
|
Hi Peter,
?
The input modules used in the 54300A are also used in the HP 54100A/D scopes. ? You can find the service manual for the scope here:
?
? https://www.keysight.com/us/en/product/54100A/1-ghz-digitizing-oscilloscope.html#resources
?
The scope service manual includes sections on the input modules. ?There isn't schematics of the scope or 54003A module, but there is detailed information on calibration and adjustments of all the input modules including the 54003A. ?Also included is the pinout on the back connector in section 7C (pinout on page 7C-26). ?From left to right looking at the back, the pins are +10V, ID0, Overload, coaxial output, ID1, ID2, and -10V.
?
If this isn't enough, the full service manual including schematics for the 54100A/D scope is available here for $25.50:
?
? http://artekmanuals.com/manuals/hp-manuals/
?
This would provide additional detail on the circuitry that supports the input modules, and who knows, maybe schematics of the modules too since they were included in the above service manual from Keysight.? Or maybe Peter Brown's fiche will show what you need.
?
-mark
?
?
On Fri, Feb 21, 2025 at 09:32 AM, Peter Gottlieb wrote:
|
开云体育Yes!? Thank you, this has exactly what I need! Peter
On 2/21/2025 10:04 AM, Peter Brown via
groups.io wrote:
|
to navigate to use esc to dismiss