The original message was received at Tue, 2 Dec 2003 22:35:50 0800

----- The following addresses had permanent fatal errors -----
<greg_werstiuk@...>

----- Transcript of session follows -----
... while talking to pop3.email.msn.com:

RCPT To:<greg_werstiuk@...>

<<< 550 <greg_werstiuk@...>... User unknown
550 <greg_werstiuk@...>... User unknown

开云体育

Hi Sam,


I have the PDF manual for a 428B model if that will
help.

Regards,

Jim

--- sreaves22655 <sreaves@...> wrote:

Anyone have an emailable copy of the HP 428A?

Sam
W3OHM

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now

Anyone have an emailable copy of the HP 428A?

Sam
W3OHM

--- In hp_agilent_equipment@..., Charles <charlesmorris@d...> wrote:

My 3580A spectrum analyzer works great but is much in need of a
set of knobs. All the large ones with labeled "skirts" are either
broken or missing entirely/replaced with nonlabeled knobs. Any
leads appreciated.
thanks
Charles

Have you asked sphere?



he hasn't those knobs in his list yet, but to ask him is always wise



Jorgen
dj0ud

My 3580A spectrum analyzer works great but is much in need of a
set of knobs. All the large ones with labeled "skirts" are either
broken or missing entirely/replaced with nonlabeled knobs. Any
leads appreciated.
thanks
Charles

Greetings -

After searching the excellent lists from tbfowler,
came up dry. Looking for service lit/schematics (have
the operating manual) for this HP54720D scope 4G amp plug-in
designated HP54721. The cal output on the plug-in is not
working, i can visually trace but, much better to have
schematics, board is multi-layer and I don't have
extenders.

Thanks!

Hi Scott,

That would be great. Thank you so much

Mitch

--- In hp_agilent_equipment@..., "Scott" <scott@m...>
wrote:

Hi Mitch,



I have a 451B service manual somewhere. When I find it I'll be

happy to scan

the schematics and send them to you.



Scott





_____

I've stopped 3,696 spam messages. You can too!
One month FREE spam protection at www.cloudmark.com
<>
<>



-----Original Message-----
From: aquaman8_2001 [mailto:aquaman8_2001@y...]
Sent: Friday, November 14, 2003 12:37 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Schematic for HP651B



Hello All,

I am in need of the power supply and oscillator schematics for an

HP

651B I am repairing. I have a service manual but it is for an older
model than mine. My unit has a serial number of 811-03132.

Can anyone help me out with a scan of the 2 foldout pages for this
oscillator? I would really appreciate it. It is not significantly
different from the older unit, but it appears that Si transistors
replace the Ge units seen in the manual I have. To make matters
worse, someone has been in there and made some changes/repairs that
appear to be less than professional! Not sure anymore what are
original parts and which have been changed! The parts pages which
describe thea transistors and diodes used would also be helpful.

Any help would be appreciated.

Thanks,

Mitch






Yahoo! Groups Sponsor



ADVERTISEMENT

<
egroup

web/S=1705083663:HM/EXP=1068874649/A=1853618/R=0/*http:/www.netflix.co
m/Defa

ult?mqso=60178338&partid=4116730> click here



<

M=267637.4116730.5333196.1261774/D=egroupmai

l/S=:HM/A=1853618/rand=921768773>


To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo!
<> Terms of Service.

Hello all,
I'm looking for an Hewlett Packard component, for my HP3336B
generator.
It is marked as "1SB1 0021".
Could you please help me to find this component?
Thanks for your courtesy
Best regards
Marcello Pellerano - ITALY

开云体育

Good Morning Gentlemen,

I have sent in a few new HP scans to BAMA.

Good on ya BAMA!

-Richard VK5ZLR

Hi, Can anyone help with a copy of the 5062-2119 Data communications
test library that shipped with the HP4951C & HP4952A Protocol
Analyzers?

Am also looking for the service manual for the same equipment.

Many Thanks

Richard

Hello All,

I am in need of the power supply and oscillator schematics for an HP
651B I am repairing. I have a service manual but it is for an older
model than mine. My unit has a serial number of 811-03132.

Can anyone help me out with a scan of the 2 foldout pages for this
oscillator? I would really appreciate it. It is not significantly
different from the older unit, but it appears that Si transistors
replace the Ge units seen in the manual I have. To make matters
worse, someone has been in there and made some changes/repairs that
appear to be less than professional! Not sure anymore what are
original parts and which have been changed! The parts pages which
describe thea transistors and diodes used would also be helpful.

Any help would be appreciated.

Thanks,

Mitch

I didn't expect to get such an overwhelming response!

To prevent lots of emails about manuals that are
already spoken for, here's what's left, only 30
minutes after my last posting:


=== excerpts of original message ===
Most of the manuals are for relatively new equiment.
Please realize the newer manuals, in 3-ring binders
are heavy, so shipping can sometimes cost more than
you'd expect. Prices shown below include USPS Book
Rate in the US. That service can take 8-10 days, but
quite a bit less expensive than the alternatives.

Power Splitter - 11667A
* Manual has some writing on the front. Low page
count, this one is $2 delivered in the US.

Multiprogrammer 6940A/6941A, Relay Output/readback
Card, model 69433A
* I don't even know what the thing is, but if you have
one and need the manual, here it is. $2 delivered in
the US. Actually, I think it's some sort of automatic
data collection system.

Power Supplies: E3620A. This is a recent power
supply. This manual is surprisingly complete, with
full schematics. There's enough info here that you
could replicate this benchtop low noise power supply.
This is the operating and service manual. $5 delivers
it in the US.

HP=IB conntrolled "system" power supplies:
* This is just the operating and programming manual,
no service info. Models 6632A, 6633A, 6634A.
$5 delivered in the US.

73,

Dave W8NF

__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard

I'll Take the 3312A


Dave
NR1DX

At 05:59 PM 11/9/2003 -0800, you wrote:

Hi all,

Most of the manuals are for relatively new equiment.
Please realize the newer manuals, in 3-ring binders
are heavy, so shipping can sometimes cost more than
you'd expect. Prices shown below include USPS Book
Rate in the US. That service can take 8-10 days, but
quite a bit less expensive than the alternatives.

Microwave Power Meter: These manuals are for the new
EPM series. EPM-441A/B is also known as E4418A/B, and
EPM-442A/B is also known as E4419A/B.
* User's Guide for EPM-441B (E4418B)
* User's Guide for EPM-442A (E4419A) still
shrink-wrapped
* Programming Guide that covers both 441A and 442A
$15 for all three, including Book Rate for 9 pounds in
the US.

Power Sensor - 8484A
* Operating and Service Manual. Pretty small, $2 will
deliver this one anywhere in the US.

Microwave Sweepers - the outstanding 8360 series,
including the 83620, 83630, 83640, 83650 and
variations, including B and L models.
* Troubleshooting Guide, still in the shrink wrap
* Service Guide (not in shrink wrap but in like-new
condition)
The two together constitutes the instruments' entire
service documentation
$15 for the set, including Book Rate for 11 pounds in
the US.

* Also have a second troubleshooting guide for the
sweepers, but not a matching service guide. $9
including Book Rate for 7 pounds in the US.

Spectrum Analyzer - the 8560E high performance series.
These manuals cover ALL the analyzers in that product
line:
* Mass Memory Module (that's the card reader on the
back panel - has its own manual and it's needed to do
programming, downloading, etc), Installation.
Operating, Programming and Service Guide
* User's Guide - this thing is HUGE and covers all the
functions.
* Calibration Guide - bigger even than the user's
guide. Don't think you can calibrate the instrument
with just a scope - this guide includes long lists of
equipment and software required to do the cal, besides
the procedures themselves.
$18 includes Book Rate for 20 pounds in the US for all
three.

Function Generator - 3312A
* Operating and Service Manual
This one's light, so shipping isn't so bad. $4
delivers it Book Rate in the US.

Power Splitter - 11667A
* Manual has some writing on the front. Low page
count, this one is $2 delivered in the US.

Multiprogrammer 6940A/6941A, Relay Output/readback
Card, model 69433A
* I don't even know what the thing is, but if you have
one and need the manual, here it is. $2 delivered in
the US. Actually, I think it's some sort of automatic
data collection system.

Power Supplies: E3620A. This is a recent power
supply. This manual is surprisingly complete, with
full schematics. There's enough info here that you
could replicate this benchtop low noise power supply.
This is the operating and service manual. $5 delivers
it in the US.

HP=IB conntrolled "system" power supplies:
* This is just the operating and programming manual,
no service info. Models 6632A, 6633A, 6634A.
$5 delivered in the US.


I've been selling similar manuals on eBay for a few
years, most of them came from buddies who left the
employment of HP / Agilent and had me helping them
unload remnants from their garages. These are the
last bits I have sitting around and I just want them
gone. First come, first serve, but am willing to
entertain offers on the lot.

73,

Dave W8NF

__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard



To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...



Your use of Yahoo! Groups is subject to

Dave
NR1DX
nr1dx@...

"A man who picks a cat up by the tail learns a lesson he can learn no other way" .... Mark Twain

Hi all,

Most of the manuals are for relatively new equiment.
Please realize the newer manuals, in 3-ring binders
are heavy, so shipping can sometimes cost more than
you'd expect. Prices shown below include USPS Book
Rate in the US. That service can take 8-10 days, but
quite a bit less expensive than the alternatives.

Microwave Power Meter: These manuals are for the new
EPM series. EPM-441A/B is also known as E4418A/B, and
EPM-442A/B is also known as E4419A/B.
* User's Guide for EPM-441B (E4418B)
* User's Guide for EPM-442A (E4419A) still
shrink-wrapped
* Programming Guide that covers both 441A and 442A
$15 for all three, including Book Rate for 9 pounds in
the US.

Power Sensor - 8484A
* Operating and Service Manual. Pretty small, $2 will
deliver this one anywhere in the US.

Microwave Sweepers - the outstanding 8360 series,
including the 83620, 83630, 83640, 83650 and
variations, including B and L models.
* Troubleshooting Guide, still in the shrink wrap
* Service Guide (not in shrink wrap but in like-new
condition)
The two together constitutes the instruments' entire
service documentation
$15 for the set, including Book Rate for 11 pounds in
the US.

* Also have a second troubleshooting guide for the
sweepers, but not a matching service guide. $9
including Book Rate for 7 pounds in the US.

Spectrum Analyzer - the 8560E high performance series.
These manuals cover ALL the analyzers in that product
line:
* Mass Memory Module (that's the card reader on the
back panel - has its own manual and it's needed to do
programming, downloading, etc), Installation.
Operating, Programming and Service Guide
* User's Guide - this thing is HUGE and covers all the
functions.
* Calibration Guide - bigger even than the user's
guide. Don't think you can calibrate the instrument
with just a scope - this guide includes long lists of
equipment and software required to do the cal, besides
the procedures themselves.
$18 includes Book Rate for 20 pounds in the US for all
three.

Function Generator - 3312A
* Operating and Service Manual
This one's light, so shipping isn't so bad. $4
delivers it Book Rate in the US.

Power Splitter - 11667A
* Manual has some writing on the front. Low page
count, this one is $2 delivered in the US.

Multiprogrammer 6940A/6941A, Relay Output/readback
Card, model 69433A
* I don't even know what the thing is, but if you have
one and need the manual, here it is. $2 delivered in
the US. Actually, I think it's some sort of automatic
data collection system.

Power Supplies: E3620A. This is a recent power
supply. This manual is surprisingly complete, with
full schematics. There's enough info here that you
could replicate this benchtop low noise power supply.
This is the operating and service manual. $5 delivers
it in the US.

HP=IB conntrolled "system" power supplies:
* This is just the operating and programming manual,
no service info. Models 6632A, 6633A, 6634A.
$5 delivered in the US.


I've been selling similar manuals on eBay for a few
years, most of them came from buddies who left the
employment of HP / Agilent and had me helping them
unload remnants from their garages. These are the
last bits I have sitting around and I just want them
gone. First come, first serve, but am willing to
entertain offers on the lot.

73,

Dave W8NF

__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard

Hi Tom,

Anybody have a solution for the peeling meter faces
commin on HP meters like the 400EL?

I have photocopied the dial scale from a cataloge or manual,
and glued it in place.
You can cut out the window for the mirror (if it has one).
The 1970 Hp catalog has 4 scales on page 173.

I'd be interesetd in a better fix,
but this looks OK.

73s
RR vk2ilv

---------------------------

Tom,

I've never seen one do that. But I've only had a few of them go through here (bought surplus and resold). My obvious suggestion would be to buy a parts unit and take the meter out of it. They are pretty inexpensive, nowadays. I'll check to see if I have any left. If so, I'll list them at (or you can drop me an email). If you want to go that route, you should also check www.ebay.com . You can also put an "auto-search" on ebay, so you'd be automatically emailed whenever anything matching your search came up for auction. Just go to "My Ebay" and then "Favorites". And, just in case one of their good warehouse sites is near you, you should also check out , since all you want is a parts unit. Good luck.

Regards,

Tom Gootee

tomg@...

----------------------------

----------
From: hp_agilent_equipment@...[SMTP:hp_agilent_equipment@...]
Sent: Sunday, November 09, 2003 7:04 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Digest Number 27


To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...


------------------------------------------------------------------------

There is 1 message in this issue.

Topics in this digest:

1. HP Meters
From: "Tom Dawson" <wb3akd@...>


________________________________________________________________________
________________________________________________________________________

Message: 1
Date: Sat, 8 Nov 2003 12:59:30 -0500
From: "Tom Dawson" <wb3akd@...>
Subject: HP Meters

Anybody have a solution for the peeling meter faces commin on HP meters like
the 400EL?

73

Tom Dawson
WB3AKD

wb3akd@...



________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to

Anybody have a solution for the peeling meter faces commin on HP meters like
the 400EL?

73

Tom Dawson
WB3AKD

wb3akd@...