CHECK OUT THE WIKI The purpose of the wiki is mainly to allow you to find information on instruments, either from either

The model number
The function(s) listed below. Some instruments have multiple functions - for example, the 4195A is a VNA, spectrum analyzer and an impedance analyzer. Therefore the 4195A is listed in multiple categories

Please also check out HPWiki available here:

Accessory kits - various types
AC power analyzers - PA2201A and PA2203A
AC power supplies 6811C, 6812C, 6813C
Airlines
Arbitrary waveform generators M8194A
Amplifiers?493A, 495A?
Attenuators (optical) 8156A, 8157A, 8158B, 81566A, 81576A,?
Attenuators (RF) 8494A
Attenuator set (500 Ω) 350C
Attenuator set (600 Ω) 350D
Attenuator switch driver
Audio analyzers? 8903A, 8903B, 8903E,? ?
Base station test sets
Bit error rate testers (BERTs)
Cables
Capacitance meters U1701A, U1701B, 4272A, 4278A, 4279A
Capacitor Bridge 4270A,
Capacitor standards 16380A, 16380C,?
Carrier noise test setsi
Cesium frequency standards
Clamp ammeters
Close field probes
Crystal Impedance E4915A, E4916A
Data Acquisition Systems (DAQs)
DC power analyzers
DC power supplies 6030A , 6031A , 6032A, 6033A, 6035A, 6131C, 6621A, 6622A, 6623A, 6624A, 6627A, 6255A, 6645A, 6671A, 6672A, 6673A, 6674A, 6675A, 62003A, 62003C, 62003E, 62004A, 62004B, 62004E, 62005A, 62005B, 62005E, 62006A, 62006B, 62006E, 62010A, 62010C, 62010E, 62012A, 62012C, 62012E, 62015A, 62015C, 62015E, 62018A, 62018C, 62018E, 62024A, 62024C, 62024E, 62028A, 62028C, 62028E, 62048A, 62048C, 62048E
Delay lines
Detectors
Device current waveform analyzers
Digital communications analyzers
Directional couplers
Distortion analyzers 330B, 330C, 330D, 331A, 332A, 333A, 334A, 339A, 8903A, 8903B, 8903E,???
Dynamic measurement DC source
Electrometers
Fading simulators
Femto ammeters
Filters
Frequency counters 522B, 5342A 5343A 5352B
Frequency standards?
- Cesium frequency standards 5090A
- Off-air 60 kHz frequency standards
- Off-air 200 kHz frequency standards
- Off-air GPS frequency standards
- Quartz frequency standards 105A, 105B
Function Generators ? 3310A,? 8165A,
GPIB controllers, extenders, cables etc.
GPS frequency standards
Harmonic mixers
High resistance meters 4339B
- High resistance meter fixtures 16008B
HEV EV Grid Emulators and Test Systems
In-circuit test systems
Impedance analyzers 4195A, 4291A, 4291B, 4395A, 4396A, 4396B, 4294A, E4990A, E4991A
Impedance Analyzer Accessories
- Impedance Test Kit 41951A,?
- Test Fixture Adapter 16099A
- Test Fixture 16034G, 16034H, 16047A, 16191A, 16192A, 16193A, 16093B, 16194A, 16452A,
- Test Head 4291B
Impedance / Gain Phase analyzer 4194A
Impedance Meter 4193A,
Isolators
LCR meters? U1701A, U1701B, U1731A,? U1731B, U1731C, U1732A, U1732B, U1732C, U1733C, 4191A , 4192A, 4194A, 4195A, E4196A,? 4216A, 4260A, 4261A, 4262A? 4263A, 4263B, 4271B, 4274A, 4275A, 4276A , 4277A, 4284A, 4285A, 4286A, 4287A, 4291A, 4291B, 4294A, 4332A, 4342A, 4395A, 4396A, 4396B, E4980A and E4980AL
LCR meter calibration devices? 16380A 42030A? 42090A, 42091A and 42100A
LCR meter accessories
- 2-Terminal BNCs.
  - 41900A, 41901A
- 4-Terminal Pair (BNC connectors)
  - Cable extension 16048A, 16048D, 16048E, 16048G, 16048H
  - DC current bias accessories 42841A, 42842A, 42842B, 42842C, 42843A
  - DC voltage bias accessories 16065A, 16065C,
  - Kelvin clips 16089A, 16089B, 16089C,16089E
  - Lead Components 16047A,16047B, 16047D, 16047E
  - Material 16451B, 16452A
  - Probes 42941A
  - SMD 16034E, 16034G, 16034H
  - 2-port 16096A
- 7 mm (APC7)
  - APC-7 Connector Repair Kit 11591A
  - Binding post 16093A, 16093B
  - DC voltage bias accessory 16200B,
  - Lead components 16092A
  - Material 16453A, 16454A
  - SMD? 16192A, 16194A, 16196A, 16196B, 16196C, 16196D, 16197A, 16198A
LCZ meters? 4276A, 4277A,
Lightwave clock / data receivers
Lightwave converter
Lightwave component analyzer
Lightwave measurement system mainframes
Lightwave polarization analyzers 8509B
Logic analyzers
Nemo wireless network solutions.
Noise and interference test set
Noise figure analyzers
Noise sources 346A, 346B. 346C ,
Matching pads (50 ohm to 75 ohm or similar)
Materials test equipment
Microwave repeaters
Microwave downconverters 70427A
Microwave / THz sources
Milliammeter 428B
Milliohm meter
Mobile communications DC source
Modular instruments
- AXIe
- Data acquisition (DAQ)
- USB
- PXIe
Modulation analyzers
Multimeters 427A, 970A
Optical attenuators
Optical heads
Optical sources
Optical spectrum analyzers
Oscilloscopes 120A, 120AR, 120B, 122A, 130A, 130B, 130BR, 130C, 140A, 140B, 141A, 150A, 150AR, 160B, 180A, 180AR, 180CD, 181A, 181AR, 181T, 181TR, 182C, 182T, 183A, 183B, 184A, 184B, 185A, 185B, 1200A, 1200B, 1220A, 1221A, 1703A, 1707A, 1707B, 1710A, 1710B, 1715A, 1722A, 1725A, 1726A, 1740A, 1741A, 1742A, 1743A, 1744A, 1746A, 1980A, 1980B, 5403A, 6000A, 6000L, 16533A, 16534A, 54100A, 5410B, 54100C, 5100D, 54111D, 54120A, 54120B, 54200A, 54501A, 54502A, 54503A, 54504A, 54520A, 54520C, 54540A, 54540C, 54542A, 54542C, 54600B, 54601A, 54601B, 54602B, 54603B,? 54645A, 54654N, 54710A, 54720A, 54750A, 54825N, E1428,?
Oven controlled crystal oscillators (OCXOs)
Pattern generators
PCM terminal test set
Phase noise measurement
Pico ammeters
Printers 2225
Plotters 7470A, 7475A?
Probes
Protocol analyzers and exercisers.
Power booster test sets
Power meters 431A, 431B, 431C, 432A, 435A, 435B, 437B, 438A
Power splitters
Power supplies
Pulse generators
Q-meters 4342A?
- Q-meter calibration inductors 16470A
Reflection transmission test set
Return loss module (optical)
Relays / switches / switch matrices (optical)
Relays / switches / switch matrices (RF)
Resistor standards 42030A?and 42100A
S-parameter test sets
Scalar network analyzers
SCSI bus preprocessor interface E2324A
Selective level meters 3746A
Semiconductors
Semiconductor parameter analyzers 4145A, 4155B, 4156B,
Signal analyzers
Signal generators / sweep generators / signal sources / oscillators 200CD, 201B, 209A, 204D,? 608A,? 8165A
Software
Source measure units
Spectrum analyzers 4195A,???
Switch control units
SWR meter 415E?
Time interval? counters
Time mark generator 226A
Timing and data state modules
Torque wrenches
Transmitter testers
Trigger modules
Ultrasound transducers
Universal bridge? 4260A, 4265A, 4265B?
Vacuum tube voltmeter 410C
Vector Impedance Meter 4193A, 4800A, 4815A
Vector Network Analyzers (VNAs) 4195A,? 8510A, 8510B, 8510C, 8753A, 8753B, 8753C, 8753D, 8753E, 8753ES, 8752ET, 8719A, 8719B, 8719C, 8719D, 8720A, 8720B, 8720C, 8720D, 8720ES, 8722A, 8722B, 8722C, 8722D, 8722ES,
Vector Network Analyzers (VNA) calibration kits 85032B, 85032E, 85033C, 85033D, 85033E, 85050B, 85050C, 85050D, 85052B, 85052C, 85052D, 85054A, 85054B, 85054D, 85056A
Vector Network Analyzer (VNA) verification kits
Vector Signal Analyzer 89650S, 89600S
Vector voltmeters 8405A, 8508A,
VXI mainframes 70000B, 70000C
Waveform and function generators
Waveguide to waveguide and waveguide to coaxial transitions.
Wireless 58 OTA chambers
Wireless channel emulators
Wireless network emulators
Wireless communication test sets

HP Meters

#98

Anybody have a solution for the peeling meter faces commin on HP meters like
the 400EL?

73

Tom Dawson
WB3AKD

wb3akd@...

PFcap query

#97

Looking for some info on a broken cap..........Manual says it is a 
selected part, with the ave value given as 5pf mica 10% 500vdcw (from 
Hi Q div of Aerovox Corp Olean NY)Hp part no. is 0150-008.
This little pesky varmint looks just like a small resistor (1/8 dia,x 
1/8 long)The colors are Blue/gray/white/gold, from what I can figure 
from all the old cap charts it should be 68pf or 6.8pf. Before it 
broke it measured I think around 9pf ( with it connected across 
double bannana jacks)Any clues on its replacement? Since this is in 
parallel with the scopes or meters input capacitance, its effect 
would seems to be neglegible.
Survey says..............
Dave

Re: Hewlett Packard Military Tube Type Oscilloscopes

Dave Brown

#96

Robert
For documentation you might like to check out the LOGSA site-

 Enter 'oscilloscope' in the 'TM Title text' search box.
Definitely some AN/USM-140C info there but don't know how much. Possibly
also other interesting info re your enquiry.

Dave Brown
Christchurch. NZ

Show quoted text

----- Original Message ----- 
From: "rom777772003" <romhifi@...>
To: <hp_agilent_equipment@...>
Sent: Saturday, October 18, 2003 7:06 PM
Subject: [hp_agilent_equipment] Hewlett Packard Military Tube Type
Oscilloscopes

Hello.

My name is Robert.
I am in search of some of the older Hewlett Packard Military (tube
type) oscilloscopes. I am currently in search of these (two)
particular models and the manuals at this time;
OS-121B/USM-140
AN/USM-140C
I am also looking for a few other Military Hewlett Packard tube type
oscilloscopes and manuals as well. I am willing to purchase them and
pay for the shipping costs too. Is there any one of you folks who
might have either one of these units for sale and or perhaps you
could put me in touch with a person(s) and or a company who might
have one or perhaps a few of them in (excess) stock?
Enclosed is my e-mail address and home phone telephone number for
someone and or a company to reach me at.
e-mail address; romhifi@...
Home#; 360-459-1874
Also, I am also open to swap/trades for these types of equipment and
for those who are interested you are welcome to contact me. Thank you
for your time and have a nice day.
Respectfully, Robert

To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...

Your use of Yahoo! Groups is subject to 

Hewlett Packard Military Tube Type Oscilloscopes

rom777772003

#95

Hello.

My name is Robert. 
I am in search of some of the older Hewlett Packard Military (tube 
type) oscilloscopes. I am currently in search of these (two) 
particular models and the manuals at this time;
OS-121B/USM-140
AN/USM-140C
I am also looking for a few other Military Hewlett Packard tube type 
oscilloscopes and manuals as well. I am willing to purchase them and 
pay for the shipping costs too. Is there any one of you folks who 
might have either one of these units for sale and or perhaps you 
could put me in touch with a person(s) and or a company who might 
have one or perhaps a few of them in (excess) stock? 
Enclosed is my e-mail address and home phone telephone number for 
someone and or a company to reach me at.
e-mail address; romhifi@...
Home#; 360-459-1874
Also, I am also open to swap/trades for these types of equipment and 
for those who are interested you are welcome to contact me. Thank you 
for your time and have a nice day.
Respectfully, Robert

hp 7475a service manual

brendart2000

#94

I am looking for a hp7475a service manual or schematic. I am working
on a project that includes this plotter with modifications. Any help 
would be appreciated.

Rick Paul

Re: 8753C

Dave W8NF

#93

Tom,

Couple of options for you:
1) HTML file (missing some graphics) that lists the
available commands for 8753C, D, and similar boxes. 
Doesn't tell you how to use them.  It's a small file,
123kb.  I'll email after this email in case you're
needing something fast.

2) I have a .pdf of the programming guide for the D
model of the instrument.  In addition to the
comprehensive description of all commands, it's got
lots of programming examples.  Because it's 1.2Meg, I
don't want to send unless you tell me to.

3)  I have the original "programming notes" for the
8753A/B in printed form.  Would take some time but I
could copy and send to you.  This might be the closest
thing to an 8753C manual I can get.  Not sure why the
"c" doesn't seem to have docs.

AND, in case you are running up against "The Common
8753A/B/C Programming Problem":  In theory, the HPIB
commands can be terminated either by an assertion of
the EOI line (a hardware wire in the HPIB interface),
or by the correct "last" data character.  CR or LF, I
think are acceptable.  Due to an indsiscovered
omission in the 8753A/B/C, you MUST exert EOI for the
box to accept a command.  Isn't supposed to be that
way.  If you're using an HP-buit HP-IB card with any
of HP's software, or if you are using an HP BASIC
controller, the default setup is to establish EOI. 
However, this is not the default with the National
Instruments cards and drivers, so you have to manually
change that configuration if you're using non-HP cards
or drivers.

Will send the html file under separate cover.

73,

Dave W8NF


Message: 1
   Date: Fri, 10 Oct 2003 16:14:56 -0400
   From: "Tom Dawson" <wb3akd@...>
Subject: 8753C


Can anyone point me to a pdf or something on line with
HPIB command 
list for
the 8753?


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Re: HP 8672A odd problem.

John Miles

#92

How about the PD's reference and VCO inputs?  My bet's on the YIG or tuning
driver circuit, or one of the supplies associated with them.

-- john KE5FX

Show quoted text

Synthesizer lock on all frequencies but has about a 10 KHz FM signal on
most frequencies.  Using a scope on the output pins of the Phase detector
chip shows the expected pulses but  about a ten KHz amplitude
modulation on
the pins.  Powwersupply looks clean.  Chip jhas been replaced.
Anyone seen
this before?

HP 8672A odd problem.

#91

Synthesizer lock on all frequencies but has about a 10 KHz FM signal on
most frequencies.  Using a scope on the output pins of the Phase detector
chip shows the expected pulses but  about a ten KHz amplitude modulation on
the pins.  Powwersupply looks clean.  Chip jhas been replaced.  Anyone seen
this before?



73

Tom

WB3AKD

8753C

#90

Can anyone point me to a pdf or something on line with HPIB command list for
the 8753?

r

Tom

WB3AKD

HP 6177C Current Source Manual

tbfowler100

#89

Does anyone have an operator's manual (or O/S manual) for the HP 
6177C current source that they can lend me?

Eurotherm 832

dmac1054us

#88

I sorry to get off topic but I have tried many forums looking for a 
schematic for a Eurotherm 832 power supply.
Eurotherm list this with a 831 on their web site, but the 832 is 
different.Eurotherm Europe states this was a USA only model.
Eurotherm USA wont release a copy.
I thought maybe Eurotherm may have not made this and have done 
searches on other supplies to find one similar but no luck.
thanks.
Doug

Re: Tektronics forums

dmac1054us

#87

Thanks to all for the replies.
The second one  under files 
had a copy of the schematic I needed. Both sites have information 
under files
Thanks
doug

-- In hp_agilent_equipment@..., "Miroslav Pokorni" 
<mpokorni2000@y...> wrote:
Thank you, Jorgen.

Regards

Miroslav Pokorni
----- Original Message -----
From: "Jorgen Lund-Nielsen" <dj0ud@w...>
To: <hp_agilent_equipment@...>
Sent: Tuesday, October 07, 2003 11:43 AM
Subject: [hp_agilent_equipment] Re: Tektronics forums

--- In hp_agilent_equipment@..., "Miroslav Pokorni"
<mpokorni2000@y...> wrote:
Hello Doug,
What is the second Tek group.

Regards

Miroslav Pokorni

Jorgen
dj0ud

To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...

Your use of Yahoo! Groups is subject to

Re: Tektronics forums

#86

Thank you, Jorgen.

Regards

Miroslav Pokorni

Show quoted text

----- Original Message -----
From: "Jorgen Lund-Nielsen" <dj0ud@...>
To: <hp_agilent_equipment@...>
Sent: Tuesday, October 07, 2003 11:43 AM
Subject: [hp_agilent_equipment] Re: Tektronics forums

--- In hp_agilent_equipment@..., "Miroslav Pokorni"
<mpokorni2000@y...> wrote:
Hello Doug,
What is the second Tek group.

Regards

Miroslav Pokorni

Jorgen
dj0ud

To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...

Your use of Yahoo! Groups is subject to

Wanted: HP 5355A Plug-in for HP 5345A Counter

cesium_mike

#85

Dear Colleagues,

 I'm looking for a HP 5355A plug in (frequency converter) for use in
an HP 5345A counter.

 Anyone who has a spare kindly email me at: cesium_mike@...

Regards,

Mike, W4XN

Re: Tektronics forums

#84

--- In hp_agilent_equipment@..., "Miroslav Pokorni" 
<mpokorni2000@y...> wrote:
Hello Doug,
What is the second Tek group.

Regards

Miroslav Pokorni



Jorgen
dj0ud

Re: Tektronics forums

#83

Hello Doug,
What is the second Tek group.

Regards

Miroslav Pokorni

Show quoted text

----- Original Message -----
From: "dmac1054us" <dmac1054@...>
To: <hp_agilent_equipment@...>
Sent: Monday, October 06, 2003 7:16 AM
Subject: [hp_agilent_equipment] Re: Tektronics forums

thanks Fred
I did find 2 groups of interest for Tek on Yahurl.
Doug

--- In hp_agilent_equipment@..., Fred Olsen
<fwolsen@e...> wrote:
Anyone know of any Tektronics forums?No, but there's a Tektronix group here on Yahurl.TekScopes@...

Fred
--
<><
--
Outgoing checked by Norton AV

To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...

Your use of Yahoo! Groups is subject to 

Re: Tektronics forums

dmac1054us

#82

thanks Fred
I did find 2 groups of interest for Tek on Yahurl.
Doug

--- In hp_agilent_equipment@..., Fred Olsen 
<fwolsen@e...> wrote:
Anyone know of any Tektronics forums?No, but there's a Tektronix group here on Yahurl.  TekScopes@...

Fred
-- 
<><
--
Outgoing checked by Norton AV

5300A + 5302A check

#81

开云体育

I have a 5300A measuring system readout with a 5302A 50 Mhz counter.? When I first turn the unit on, with the function knob dialed to "check" the counter reads 10.0000 Mhz but after it warms up for a few minutes, the counter begins to read 9.9999999 MHz.? If I plug a cable from the front bnc to the timebase output it reads 10.0000 Mhz.? I have adjusted the crystal frequency to give correct readings from a more accurate 10 Mhz reference.? Is the check function supposed to read 9.999999 or is it supposed to read 10.0000000?? I don't have a manual, so I don't know.

Thanks,

Steve Hogan

Re: Tektronics forums

Fred Olsen

#80

Anyone know of any Tektronics forums?No, but there's a Tektronix group here on Yahurl.  TekScopes@...

Fred
-- 
<><
--
Outgoing checked by Norton AV

Tektronics forums

dmac1054us

#79

Anyone know of any Tektronics forums?
thanks
Doug

150681 - 150700 of 150752