¿ªÔÆÌåÓý

Date

Re: 8501A Normalizer manual

John Miles
 

¿ªÔÆÌåÓý

Some of these normalizers, like the 8750A, required a 'personality module' to make them work with particular pieces of gear.? For instance, the 8750A could be configured for use with either the 8505 VNA or 141T spectrum analyzer, if?I remember correctly.?
?
So it's possible that your 8501A is in working order after all, but configured for use with?an 8505 or something else.
?
-- john KE5FX


Perhaps the best first question is can you email me a couple of pages that would guide me through testing the 8501A?? I have an in-calibration 8754A and my analyzer manual does not cover the "adjustment" that needs to be made to use the 8501A, but does mention it.

The Storage Normalizer does not toggle when I press the local/remote button on the far right (although the LED does flicker on power up), and the display goes blank if I turn the storage display control to "ON" or "HOLD".? I expected something to happen, but not a blank display.

I have already checked the 8501A, reseated all boards, looked for component problems, power supply problems, etc.?? It was an EBAY deal...? what can I say!? I really would like to get it working, though.?

I home-brew duplexers (have a set of 6m cans nearly complete right now), so let me know it there is anything I can offer you in exchange for a copy or to borrow your manual.


8501A Normalizer manual

Gary Peterson
 

¿ªÔÆÌåÓý

Mike;

Perhaps the best first question is can you email me a couple of pages that would guide me through testing the 8501A?? I have an in-calibration 8754A and my analyzer manual does not cover the "adjustment" that needs to be made to use the 8501A, but does mention it.

The Storage Normalizer does not toggle when I press the local/remote button on the far right (although the LED does flicker on power up), and the display goes blank if I turn the storage display control to "ON" or "HOLD".? I expected something to happen, but not a blank display.

I have already checked the 8501A, reseated all boards, looked for component problems, power supply problems, etc.?? It was an EBAY deal...? what can I say!? I really would like to get it working, though.?

I home-brew duplexers (have a set of 6m cans nearly complete right now), so let me know it there is anything I can offer you in exchange for a copy or to borrow your manual.




Gary
NZ5V






Re: HP 8501A Storage Normalizer Manual

 

¿ªÔÆÌåÓý

Gary ¨C

?

I do. Do you want to borrow it, or, do you just want me to look something up? - Mike

?

?

Mike B. Feher, N4FS

89 Arnold Blvd.

Howell, NJ, 07731

732-901-9193

?

?

-----Original Message-----
From: Gary Peterson [mailto:NZ5V@...]
Sent: Saturday, November 13, 2004 8:07 PM
To:
hp_agilent_equipment@...
Subject: [hp_agilent_equipment] HP 8501A Storage Normalizer Manual

?

Anyone got a copy of the 8501A storage normalizer manual???? Mine
doesn't toggle from local to remote mode, and does not appear to work.

Using it with the 8754A Network Analyzer.


Gary
NZ5V



HP 8501A Storage Normalizer Manual

Gary Peterson
 

Anyone got a copy of the 8501A storage normalizer manual? Mine doesn't toggle from local to remote mode, and does not appear to work.

Using it with the 8754A Network Analyzer.


Gary
NZ5V


Re: H-P 184A

free2beme953572002
 

--- In hp_agilent_equipment@..., "free2beme953572002"
<blackbag@c...> wrote:

Hi to all,
Would someone have a H-P 184A that is in PDF ?
Thanks.
Never mind.
I'll buy it.


HP manuals on BAMA

morriso2002
 

I have uploaded manual scans for the HP 5100A/5110A synthesizer to
BAMA. They should appear in the next day or so. I have also uploaded a
scan of the manual for the 5254C 3 GHz plugin for the 534* series
nixie tube counters.

Enjoy!

Morris


Re: HP8708A Synchronizer

Brian Goldsmith
 

-----Original Message-----
From: vk2kyp


Can anyone help me, I am looking for data on a HP8708A Synchroniser.
I understand it can be used to stabilize a HP606b and late model
HP608's.
I generates a DC voltage which is used to changed the reverse bias
on varacter diode. This is used as a fine frequency control, and is
referenced back to a crytsal oscillator in the HP8708A. This is
about all I know, any futher information is appreciated.



***Gary and the list.
The correct synchroniser for the HP 606B and the HP 608F is indeed the HP
8708A.I will email you the specification page from the manual.The
synchronizer works on the huff and puff oscillator stabilization principle
and is extremely accurate and stable after initial warm up.

Regards,Brian Goldsmith.


HP8708A Synchronizer

vk2kyp
 

Hi All,
Can anyone help me, I am looking for data on a HP8708A Synchroniser.
I understand it can be used to stabilize a HP606b and late model
HP608's.
I generates a DC voltage which is used to changed the reverse bias
on varacter diode. This is used as a fine frequency control, and is
referenced back to a crytsal oscillator in the HP8708A. This is
about all I know, any futher information is appreciated.

Thank you Gary Beech VK2KYP


Re: HP 3406A manual needed

 

Hello All,

Though I thanked Gary for the received pdf in a personal email, I
just wanted to say thank you to the moderator(s) and members of this
group for helping to facilitate the exchange of information which
permits us to keep old HP gear operational and useful!

Thanks,


Mitch

--- In hp_agilent_equipment@..., "aquaman8_2001"
<aquaman8_2001@y...> wrote:

Hello Gary,

I am not sure if my Yahoo address can accept a file this large. I
am
quite sure that it can

As an alternative, can you post it to the Files section on this
group?

If these options don't work, I have another address which I can
send
to you off line that can accept the file.

Appreciate the effort!!

Cheers,

Mitch

--- In hp_agilent_equipment@..., "Gary Beech"
<gbeech@m...> wrote:
Hi all I have a PDF of the HP3406a, it is 4MB can you accept a
file this
large

regards Gary Beech VK2KYP

_____

From: aquaman8_2001 [mailto:aquaman8_2001@y...]
Sent: Thursday, 11 November 2004 1:04 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: HP 3406A manual needed



Hello,

If you do have that PDF, I would also really appreciate a copy!

Great group!!

Thanks in advance,

Mitch

--- In hp_agilent_equipment@..., "Gary Beech"
<gbeech@m...> wrote:
Hi Dave,
I think I have a PDF of the HP3406a I will confirn later when
I
get home

regards

Gary Beech VK2KYP

-----Original Message-----
From: daveolla [mailto:grobbins@n...]
Sent: Tue 9/11/2004 10:17 PM
To: hp_agilent_equipment@...
Cc:
Subject: [hp_agilent_equipment] HP 3406A manual needed



Greetings, I am looking for a HP 3406A manual, that
hopefully is
cheaper than the actual unit was. PDF is plenty fine.
Thanks
Dave Robbins





Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<
76/D=groups/S=1705083663:HM/EXP=1100085501/A=2376776/R=0/SIG=11ldm1jv
c/*>
<
M=294855.5468653.6549235.3001176/D=groups/S=:HM/A=2376776/rand=591103
946>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?
subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the
Yahoo!
Terms of Service <> .




****
***
The information contained in this e-mail message and any
accompanying files
is or may be confidential.If you are not the intended
recipient,
any use,
dissemination, reliance,forwarding, printing or copying of
this
e-
mail or
any attached files is unauthorised.This e-mail is subject to
copyright. No
part of it should be reproduced,adapted or communicated
without
the written
consent of the copyright owner.If you have received this e-
mail
in
error,
please advise the sender immediately by return e-mail, or
telephone and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not
accept
legal
responsibility for the contents of this message or attached
files.
****
***





Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<
76/
D=groups/S=1705083663:HM/EXP=1100181918/A=2128215/R=0/SIG=10se96mf6/*
htt
p://companion.yahoo.com>

<
M=295196.4901138.6071305.3001176/D=group
s/S=:HM/A=2128215/rand=137349681>

_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?
subject=Unsubsc
ribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <> .




****
***
The information contained in this e-mail message and any
accompanying files
is or may be confidential.If you are not the intended recipient,
any use, dissemination, reliance,forwarding, printing or copying
of
this e-mail or
any attached files is unauthorised.This e-mail is subject to
copyright. No
part of it should be reproduced,adapted or communicated without
the written
consent of the copyright owner.If you have received this e-mail
in
error,
please advise the sender immediately by return e-mail, or
telephone and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not accept
legal
responsibility for the contents of this message or attached
files.
****
***


New file uploaded to hp_agilent_equipment

 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the hp_agilent_equipment
group.

File : /3406a.pdf
Uploaded by : vk2kyp <gbeech@...>
Description : HP3406a Wideband Voltmeter

You can access this file at the URL:


To learn more about file sharing for your group, please visit:


Regards,

vk2kyp <gbeech@...>


HP 3406A manual request.. add me please

 

Dear Gary,

? I can accept that file size with no problem.? Would you kindly send it to me as well?

Regards,

Mike DiGirolamo, W4XN
DrD@...

--------------------

At 21:55 11/10/2004, you wrote:

Hi all I have a PDF of the HP3406a, it is 4MB can you accept a file this large
?
regards Gary Beech VK2KYP


Re: HP 3406A manual needed

 

Hello Gary,

I am not sure if my Yahoo address can accept a file this large. I am
quite sure that it can

As an alternative, can you post it to the Files section on this
group?

If these options don't work, I have another address which I can send
to you off line that can accept the file.

Appreciate the effort!!

Cheers,

Mitch

--- In hp_agilent_equipment@..., "Gary Beech"
<gbeech@m...> wrote:
Hi all I have a PDF of the HP3406a, it is 4MB can you accept a
file this
large

regards Gary Beech VK2KYP

_____

From: aquaman8_2001 [mailto:aquaman8_2001@y...]
Sent: Thursday, 11 November 2004 1:04 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: HP 3406A manual needed



Hello,

If you do have that PDF, I would also really appreciate a copy!

Great group!!

Thanks in advance,

Mitch

--- In hp_agilent_equipment@..., "Gary Beech"
<gbeech@m...> wrote:
Hi Dave,
I think I have a PDF of the HP3406a I will confirn later when I
get home

regards

Gary Beech VK2KYP

-----Original Message-----
From: daveolla [mailto:grobbins@n...]
Sent: Tue 9/11/2004 10:17 PM
To: hp_agilent_equipment@...
Cc:
Subject: [hp_agilent_equipment] HP 3406A manual needed



Greetings, I am looking for a HP 3406A manual, that
hopefully is
cheaper than the actual unit was. PDF is plenty fine.
Thanks
Dave Robbins





Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<
76/D=groups/S=1705083663:HM/EXP=1100085501/A=2376776/R=0/SIG=11ldm1jv
c/*>
<
M=294855.5468653.6549235.3001176/D=groups/S=:HM/A=2376776/rand=591103
946>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?
subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service <> .




****
***
The information contained in this e-mail message and any
accompanying files
is or may be confidential.If you are not the intended recipient,
any use,
dissemination, reliance,forwarding, printing or copying of this
e-
mail or
any attached files is unauthorised.This e-mail is subject to
copyright. No
part of it should be reproduced,adapted or communicated without
the written
consent of the copyright owner.If you have received this e-mail
in
error,
please advise the sender immediately by return e-mail, or
telephone and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not accept
legal
responsibility for the contents of this message or attached
files.
****
***





Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<
76/
D=groups/S=1705083663:HM/EXP=1100181918/A=2128215/R=0/SIG=10se96mf6/*
htt
p://companion.yahoo.com>

<
M=295196.4901138.6071305.3001176/D=group
s/S=:HM/A=2128215/rand=137349681>

_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?
subject=Unsubsc
ribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <> .




****
***
The information contained in this e-mail message and any
accompanying files
is or may be confidential.If you are not the intended recipient,
any use, dissemination, reliance,forwarding, printing or copying of
this e-mail or
any attached files is unauthorised.This e-mail is subject to
copyright. No
part of it should be reproduced,adapted or communicated without
the written
consent of the copyright owner.If you have received this e-mail in
error,
please advise the sender immediately by return e-mail, or
telephone and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not accept
legal
responsibility for the contents of this message or attached files.
****
***


A8 DSP for 6814B

gearoidloughnane
 

Hi all,
Im looking for the following:

Make: Agilent
Model: 6814B
Description: AC Power Source/Analyzer
Part Required: Board A8 DSP

Will make a good offer if anyone has one available.
Thanks

Gearoid Loughnane


Re: HP 8600A partial manual needed

Brian Goldsmith
 

Greetings to all.I have a manual for the 8600A (LED display version) Digital
Marker but it lacks the schematics and PCB layouts.Can anyone help with a
scan or photocopy? All costs gratefully prepaid.
Brian Goldsmith.


Re: HP 3406A manual needed

Gary Beech
 

¿ªÔÆÌåÓý

Hi all I have a PDF of the HP3406a, it is 4MB can you accept a file this large
?
regards Gary Beech VK2KYP


From: aquaman8_2001 [mailto:aquaman8_2001@...]
Sent: Thursday, 11 November 2004 1:04 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Re: HP 3406A manual needed


Hello,

If you do have that PDF, I would also really appreciate a copy!

Great group!!

Thanks in advance,

Mitch


--- In hp_agilent_equipment@..., "Gary Beech"
wrote:
> Hi Dave,
> I think I have a PDF of the HP3406a I will confirn later when I
get home
>?
> regards
>?
> Gary Beech VK2KYP
>
> ????? -----Original Message-----
> ????? From: daveolla [mailto:grobbins@n...]
> ????? Sent: Tue 9/11/2004 10:17 PM
> ????? To: hp_agilent_equipment@...
> ????? Cc:
> ????? Subject: [hp_agilent_equipment] HP 3406A manual needed
> ?????
> ?????
> ?????
> ????? Greetings, I am looking for a HP 3406A manual, that
hopefully is
> ????? cheaper than the actual unit was. PDF is plenty fine.
> ????? Thanks
> ????? Dave Robbins
> ?????
> ?????
> ?????
> ?????
> ?????
> Yahoo! Groups Sponsor?????
> ADVERTISEMENT
> click here
<
76/D=groups/S=1705083663:HM/EXP=1100085501/A=2376776/R=0/SIG=11ldm1jv
c/*> ?????
>? <
M=294855.5468653.6549235.3001176/D=groups/S=:HM/A=2376776/rand=591103
946> ?????
>
> ?????
>?? _____?
>
> ????? Yahoo! Groups Links
> ?????
>
> ????? *????? To visit your group on the web, go to:
> ????? ?????
> ????? ????? ?
> ????? *????? To unsubscribe from this group, send an email to:
> ????? ????? hp_agilent_equipment-unsubscribe@...
subject=Unsubscribe>
> ????? ????? ?
> ????? *????? Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service <> .
>
>
>
>
>
****
***
> The information contained in this e-mail message and any
accompanying files
> is or may be confidential.If you are not the intended recipient,
any use,
> dissemination, reliance,forwarding, printing or copying of this e-
mail or
> any attached files is unauthorised.This e-mail is subject to
copyright. No
> part of it should be reproduced,adapted or communicated without
the written
> consent of the copyright owner.If you have received this e-mail in
error,
> please advise the sender immediately by return e-mail, or
telephone and
> delete all copies.Fairfax does not guarantee the accuracy or
completeness
> of any information contained in this e-mail or attached files.
Internet
> communications are not secure, therefore Fairfax does not accept
legal
> responsibility for the contents of this message or attached files.
>
****
***






**
The information contained in this e-mail message and any accompanying files
is or may be confidential.If you are not the intended recipient, any use,
dissemination, reliance,forwarding, printing or copying of this e-mail or
any attached files is unauthorised.This e-mail is subject to copyright. No
part of it should be reproduced,adapted or communicated without the written
consent of the copyright owner.If you have received this e-mail in error,
please advise the sender immediately by return e-mail, or telephone and
delete all copies.Fairfax does not guarantee the accuracy or completeness
of any information contained in this e-mail or attached files. Internet
communications are not secure, therefore Fairfax does not accept legal
responsibility for the contents of this message or attached files.
**


Re: HP 3406A manual needed

 

Hello,

If you do have that PDF, I would also really appreciate a copy!

Great group!!

Thanks in advance,

Mitch

--- In hp_agilent_equipment@..., "Gary Beech"
<gbeech@m...> wrote:
Hi Dave,
I think I have a PDF of the HP3406a I will confirn later when I
get home

regards

Gary Beech VK2KYP

-----Original Message-----
From: daveolla [mailto:grobbins@n...]
Sent: Tue 9/11/2004 10:17 PM
To: hp_agilent_equipment@...
Cc:
Subject: [hp_agilent_equipment] HP 3406A manual needed



Greetings, I am looking for a HP 3406A manual, that
hopefully is
cheaper than the actual unit was. PDF is plenty fine.
Thanks
Dave Robbins





Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<
76/D=groups/S=1705083663:HM/EXP=1100085501/A=2376776/R=0/SIG=11ldm1jv
c/*>
<
M=294855.5468653.6549235.3001176/D=groups/S=:HM/A=2376776/rand=591103
946>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?
subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service <> .




****
***
The information contained in this e-mail message and any
accompanying files
is or may be confidential.If you are not the intended recipient,
any use,
dissemination, reliance,forwarding, printing or copying of this e-
mail or
any attached files is unauthorised.This e-mail is subject to
copyright. No
part of it should be reproduced,adapted or communicated without
the written
consent of the copyright owner.If you have received this e-mail in
error,
please advise the sender immediately by return e-mail, or
telephone and
delete all copies.Fairfax does not guarantee the accuracy or
completeness
of any information contained in this e-mail or attached files.
Internet
communications are not secure, therefore Fairfax does not accept
legal
responsibility for the contents of this message or attached files.
****
***


Re: HP 3406A manual needed

Gary Beech
 

Hi Dave,
I think I have a PDF of the HP3406a I will confirn later when I get home

regards

Gary Beech VK2KYP

-----Original Message-----
From: daveolla [mailto:grobbins@...]
Sent: Tue 9/11/2004 10:17 PM
To: hp_agilent_equipment@...
Cc:
Subject: [hp_agilent_equipment] HP 3406A manual needed



Greetings, I am looking for a HP 3406A manual, that hopefully is
cheaper than the actual unit was. PDF is plenty fine.
Thanks
Dave Robbins





Yahoo! Groups Sponsor
ADVERTISEMENT
click here <>
<>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:


* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@... <mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <> .




**
The information contained in this e-mail message and any accompanying files
is or may be confidential.If you are not the intended recipient, any use,
dissemination, reliance,forwarding, printing or copying of this e-mail or
any attached files is unauthorised.This e-mail is subject to copyright. No
part of it should be reproduced,adapted or communicated without the written
consent of the copyright owner.If you have received this e-mail in error,
please advise the sender immediately by return e-mail, or telephone and
delete all copies.Fairfax does not guarantee the accuracy or completeness
of any information contained in this e-mail or attached files. Internet
communications are not secure, therefore Fairfax does not accept legal
responsibility for the contents of this message or attached files.
**


Re: HP8558 / A8 sweep generator card schematic request

 

The manual on LOGSA includes the A8 board schematic (see page 8-53):


HP 3406A manual needed

 

Greetings, I am looking for a HP 3406A manual, that hopefully is
cheaper than the actual unit was. PDF is plenty fine.
Thanks
Dave Robbins


Manual for hp 5321B

 

I am looking for manual for hp counter 5321B. Any help would be appritiated.

Regards

Miroslav Pokorni