Re: HP 53310A - Why did I not know about this sooner?
Go get one. They are fantastic instruments, if little understood. Drink the modulation domain kool-aid. B-)
Mark Kahrs, are you listening??
-Dave
toggle quoted message
Show quoted text
On 4/16/20 11:10 PM, Jim Ford wrote: Yeah, cool!? Except now I want one!
Jim Ford
------ Original Message ------ From: "Tam Hanna" <tamhan@... <mailto:tamhan@...>> To: [email protected] <mailto:[email protected]> Sent: 4/16/2020 7:15:05 AM Subject: Re: [HP-Agilent-Keysight-equipment] HP 53310A - Why did I not know about this sooner?
Hello,
two videos:
a) what it is for
b) PSU repair, mandatory:
Tam
With best regards Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at On 2020. 04. 16. 15:13, [email protected] wrote:
Hal,
Congrats on joining the modulation domain!
As you know already, it¡¯s really a sleeper. Although it works very well for viewing any sort of frequency modulated waveform, my personal favorite use for it is as an extremely precise counter. There is a reason that it¡¯s called a frequency microscope.?
FYI, adding the deep memory option is quite easy. If you search around you¡¯ll find instructions. All you need are 4 more SRAMs and to move a couple of jumpers after installing them.
Sean
On Thu, Apr 16, 2020 at 05:34 AM, Harold Foster wrote:
All:
Picked one of these, with Opt 31, a while back and... wow.? Just, wow.? The more that I research it and play around with it the more impressed I am with it's capabilities and usefulness.? After reading a few other owner's experiences with it a common theme is; "How did I miss knowing about this?? Why is it not well known?" - very much my reaction.? I would think that if any one group of people might be aware of it, those here would be the ones.? But here, as elsewhere, there are very few mentions about it.? Anyone else use one of these?? Usage tips or other information?
Just curious,
Hal
Datasheet:
-- Dave McGuire, AK4HZ New Kensington, PA
|
Re: HP 3478A Ohms Calibration
Hi George,
?
I am looking for the front panel input connectors for the HP
3456A. One of mine is broken off.
?
Thanks
Gary? K4FMX
toggle quoted message
Show quoted text
Hello to all in this group, Thanks for being understanding during these
trying times.? I have not yet returned to my office in Minnesota where
the Red Devil resistors are so as you can see, I have not been able to fulfill
my promise to you as I am still in Loveland, Colorado.??
I
have orders in to get a Loveland cal on all of my 3458A DMMs which I was
planning of have performed while in Loveland being that my office here is just
3 miles from the Keysight facility.? That does not look like it is going
to happen so this will all have to wait until Keysight cal lab is back in
business.? I have upgraded the CAL RAMs on my 3458A meters as well as
some of the other parts related to the high stability OHMS and voltage
reference internal to the meters.
The good news is that I have gone
through my inventory here in Colorado and have found considerably more items
than I remember having.? I have parts and boards and many case parts
related to the following instruments and related I/O cards: 3421A, 3455A,
3456A, 3457A, 3458A, 3468A/B 3476B, 3478A, 3488A, 970 probe meter,? some
oscilloscopes 54501, 54511 and spectrum analyzers? 3582, 3585, 8754A,
8753A? and all the I/O cards for the 3488A:? 444XX series(XX= 70,
71,72,73,77,78, 91,92?and I/O cars for the 3457A.?? I have a
large supply of the Aromat relays(new unused) that I used in the design of the
4447X series of I/O cards for the 3488 should you need to replace any as well
as other components used on the boards
The 3468 and 3478 meters and
related axial leaded and ICs and custom hybrids I designed are also in my
inventory and are in sufficient supply to fill anyone's needs. In fact, the
SAFT and ETERNACELL 3.0v lithium back up battery for the cal RAM some were
looking for earlier are here in Colorado.? I can make them available at a
reasonable price of $2.00 each.? All of them measure 3.03v or
better.
Thank you and I will notify group when I am back in Minnesota
regarding the Red Devil resistors. I can ship other parts from Colroado if
needed.? I am scheduled to hit the road to Minnesota once I load up the
truck with the inventory on the 28th of April.? Hard to believe I have
been here almost 2 months when the initial plan was to be here 2
weeks.
George Hnatiuk
|
Re: HP 53310A - Why did I not know about this sooner?
Yeah, cool!? Except now I want one!
Jim Ford
toggle quoted message
Show quoted text
------ Original Message ------
Sent: 4/16/2020 7:15:05 AM
Subject: Re: [HP-Agilent-Keysight-equipment] HP 53310A - Why did I not know about this sooner?
Hello,
two videos:
a) what it is for
b) PSU repair, mandatory:
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
Hal,
Congrats on joining the modulation domain!
As you know already, it¡¯s really a sleeper. Although it works
very well for viewing any sort of frequency modulated waveform,
my personal favorite use for it is as an extremely precise
counter. There is a reason that it¡¯s called a frequency
microscope.?
FYI, adding the deep memory option is quite easy. If you search
around you¡¯ll find instructions. All you need are 4 more SRAMs
and to move a couple of jumpers after installing them.
Sean
On Thu, Apr 16, 2020 at 05:34 AM, Harold Foster wrote:
All:
Picked one of these, with Opt 31, a while back and... wow.?
Just, wow.? The more that I research it and play around with it
the more impressed I am with it's capabilities and usefulness.?
After reading a few other owner's experiences with it a common
theme is; "How did I miss knowing about this?? Why is it not
well known?" - very much my reaction.? I would think that if any
one group of people might be aware of it, those here would be
the ones.? But here, as elsewhere, there are very few mentions
about it.? Anyone else use one of these?? Usage tips or other
information?
Just curious,
Hal
Datasheet:
|
Re: Advantest R3767BH VNA date+time setting
On Fri, Apr 17, 2020 at 02:58:01AM +0000, Jim Ford wrote: Are you guys familiar with the existance of [email protected] ? There is a community of folks there who might help... Hi, Jesse.
A friend has a similar VNA, and for some reason I have the manual. I didn't see anything in the index about setting the time and date, but I could have missed it. Here's a .pdf if you don't already have it.
HTH.
Jim Ford
------ Original Message ------ From: "Jesse Lackey" <jesse@...> To: [email protected] Sent: 4/16/2020 5:06:24 PM Subject: Re: [HP-Agilent-Keysight-equipment] Advantest R3767BH VNA date+time setting
Hi Stan, there isn't an enter key, but there is X1. No dice, it is still Jan 1 1970. Tx for the thought tho!
J
Stan wrote:
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot of T&M gear that when setting the date, time, or any other numeric entry, you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.) after you key in the new value. Otherwise, the value will not be updated.
Regards, Stan
-- Dave Emery N1PRE/AE, die@... DIE Consulting, Weston, Mass 02493 "An empty zombie mind with a forlorn barely readable weatherbeaten 'For Rent' sign still vainly flapping outside on the weed encrusted pole - in celebration of what could have been, but wasn't and is not to be now either."
|
Re: Advantest R3767BH VNA date+time setting
Hi, Jesse.
A friend has a similar VNA, and for some reason I have the manual. I didn't see anything in the index about setting the time and date, but I could have missed it. Here's a .pdf if you don't already have it.
HTH.
Jim Ford
toggle quoted message
Show quoted text
------ Original Message ------ From: "Jesse Lackey" <jesse@...> To: [email protected]Sent: 4/16/2020 5:06:24 PM Subject: Re: [HP-Agilent-Keysight-equipment] Advantest R3767BH VNA date+time setting Hi Stan, there isn't an enter key, but there is X1. No dice, it is still Jan 1 1970. Tx for the thought tho!
J
Stan wrote:
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot of T&M gear that when setting the date, time, or any other numeric entry, you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.) after you key in the new value. Otherwise, the value will not be updated.
Regards, Stan
|
Re: HP 53310A - Why did I not know about this sooner?
Hi John,
Not familiar with the internal software in the 53310 but wanted to ask if you were aware of a user's guide specifically for option 031.? If not, it is downloadable at:
Greg
|
Re: HP 8656A A6 board U1 1020-2933 is bad
And modern ECL divider is probably a good substitute, except it will need an adapter of some sort for the pin out. At those frequencies, the 100K and higher families will be fine. DigiKey sells a bunch of chips that could be a replacement (other than the pinout).
Cheers, Kuba
toggle quoted message
Show quoted text
16 apr. 2020 kl. 9:44 em skrev george edmonds via groups.io <G6HIG@...>:
? Hi Richard
HP part number 1820-2933 is a Plessey Semiconductors SP8606B. This is a 1.3GHz divide by two ECL Logic device.
Plessey Semiconductors were manufactured in Swindon UK.
Looks like your A6 Board was manufactured and designed at the HP plant in Scotland.
Now probably hard to come by.
George G6HIG On Friday, 17 April 2020, 00:14:31 BST, Richard Hall <rhall2@...> wrote:
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it. Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B. This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you Richard Hall WB4RSO
|
Re: Application Note 122: EMI Measurement Procedure
I just checked my banana box of appnotes* and found AN122.
Weirdly, the spine just says "EMI Measurement Procedure" and the big "AN 122" on the front cover is an afterthought, put on there with a slightly skewed rubber stamp.
Subtitled "Calibration and Operation of the HP 851B/8551B Spectrum Analyzer to Measure Electromagnetic Interference"
1st page: "02464-1 Printed February 1968"
154 pages total.
Comes with a Business Reply mail postcard "Please reserve my copy of HP App Noe 63E - making fast emi measurements with a spectrum analyzer". I might fill that out, assuming HP is still at 1501 Page Mill Road and Alan Steiner is still with the Microwave Division.
And like a cereal packet, there's a bonus - a "8511/851 Spectrum Analyzer RFI/EMI Calibration Slide Rule" in on envelope glued to the inside back cover.
Sweet!
* Saw 4 banana boxed of "service manuals" being auctioned on the NZ auction Site (eBay is 2nd fiddle here in NZ), looking at the pictures spotted an HP logo on top of one of the piles - hey, that looks like an HP App Note! - got them for a song - a nationwide courier company owed me a favour (long story) and I got them shipped for free. 1 box of app notes (possibly from the estate of someone high up at HP Australia?), and 3 boxes of service manuals for tape decks, electric organs etc etc. Long tertm plan will be to scan the ones that aren't there already.
Cheers,
Andy ZL3AG
|
Re: HP 8656A A6 board U1 1020-2933 is bad
Hi Again
There is a seller in Switzerland with three available, but sit down first, they will cost about $60 each plus shipping.
George G6HIG On Friday, 17 April 2020, 00:14:31 BST, Richard Hall <rhall2@...> wrote:
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it. Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B. This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you Richard Hall WB4RSO
|
Re: HP 8656A A6 board U1 1020-2933 is bad
Hi Richard
HP part number 1820-2933 is a Plessey Semiconductors SP8606B. This is a 1.3GHz divide by two ECL Logic device.
Plessey Semiconductors were manufactured in Swindon UK.
Looks like your A6 Board was manufactured and designed at the HP plant in Scotland.
Now probably hard to come by.
George G6HIG On Friday, 17 April 2020, 00:14:31 BST, Richard Hall <rhall2@...> wrote:
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it. Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B. This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you Richard Hall WB4RSO
|
vodka -> keyboard
Thanks for that. :)
toggle quoted message
Show quoted text
On 4/16/20 9:15 PM, Andy ZL3AG via groups.io wrote: Dave's not here, man.
On 17/04/20 1:13 pm, Dave Smith W6TE wrote:
Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
-- Dave McGuire, AK4HZ New Kensington, PA
|
Um, more..
-Dave
toggle quoted message
Show quoted text
On 4/16/20 9:13 PM, Dave Smith W6TE wrote: Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
?
*From:* [email protected] <[email protected]> *On Behalf Of *Daniel Nelson *Sent:* Thursday, April 16, 2020 6:02 PM *To:* [email protected] *Subject:* [HP-Agilent-Keysight-equipment] OT - Ping!
?
Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
-- Dave McGuire, AK4HZ New Kensington, PA
|
Dave...ArtekManuals
Dan and I have been working a a "project" and I wasnt getting his email in a timely fashion as noted
Dave
toggle quoted message
Show quoted text
On 4/16/2020 9:13 PM, Dave Smith W6TE wrote: Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
*From:* [email protected] <[email protected]> *On Behalf Of *Daniel Nelson *Sent:* Thursday, April 16, 2020 6:02 PM *To:* [email protected] *Subject:* [HP-Agilent-Keysight-equipment] OT - Ping!
Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
-- Dave Manuals@... www.ArtekManuals.com
-- This email has been checked for viruses by Avast antivirus software.
|
|
|
Dan
Lots of funky things happening with my emails in last week ..I went looking tonight based on your most recent email and there they were. I have gotten a lot of emails days after they were sent recently. Suspect that all the work and school from home has done strange things to my ISP ???
Anyway I just sent the refund and I see the pages you scanne3d. I will knit that schematic for you so it is continuous
Dave
toggle quoted message
Show quoted text
On 4/16/2020 9:01 PM, Daniel Nelson wrote: Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
-- Dave Manuals@... www.ArtekManuals.com
-- This email has been checked for viruses by Avast antivirus software.
|
Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
|
Dave, Sorry about that. I had Fred on the brain. I live in Reedsburg, WI near the Dells. GOD Bless and Thanks, rich!
toggle quoted message
Show quoted text
On 4/16/2020 7:20 PM, Dave Smith W6TE wrote: Where are you located?
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of Richard R. Pope Sent: Thursday, April 16, 2020 5:10 PM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!
Hello all, This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories. GOD Bless and Thanks, rich!
On 4/11/2020 11:18 PM, Richard R. Pope wrote:
Hello all, I hit a deer in WY with my brand new car. They are probably going to total it. My GAP insurance will pay off the loan but I am probably going to be left on foot. I am getting out of working on electronics. I have a HP 16700A LA and 16700B expansion unit for sale. There are 5 16555D cards in the 16700A. The interconnect cable for the the 16700B is here. There are five pairs of cables for the 16555Ds. There are terminators for the cables and clips. The HDD in the 16700A has been upgraded to a Seagate ST 318417N and there is an external HDD and case connected to the system for extra storage. There is also a SCSI CD-Rom drive and a floppy drive installed in the 16700A. The latest OS has also been installed. It will take two very large boxes and a smaller box to packaged it up for shipping. So shipping will be expensive. Local pick up is welcome. It operates and all of the cards are good. I will guarantee no DOA. Please make me a fair offer and help me out with this. I will take Paypal F&F, Money Order, Cashiers Check, Personal Check but it will be held until the check clears. GOD Bless and Thanks, rich!
|
Fred, I live in Reedsburg, WI near the Dells. GOD Bless and Thanks, rich!
toggle quoted message
Show quoted text
On 4/16/2020 7:20 PM, Dave Smith W6TE wrote: Where are you located?
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of Richard R. Pope Sent: Thursday, April 16, 2020 5:10 PM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!
Hello all, This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories. GOD Bless and Thanks, rich!
On 4/11/2020 11:18 PM, Richard R. Pope wrote:
Hello all, I hit a deer in WY with my brand new car. They are probably going to total it. My GAP insurance will pay off the loan but I am probably going to be left on foot. I am getting out of working on electronics. I have a HP 16700A LA and 16700B expansion unit for sale. There are 5 16555D cards in the 16700A. The interconnect cable for the the 16700B is here. There are five pairs of cables for the 16555Ds. There are terminators for the cables and clips. The HDD in the 16700A has been upgraded to a Seagate ST 318417N and there is an external HDD and case connected to the system for extra storage. There is also a SCSI CD-Rom drive and a floppy drive installed in the 16700A. The latest OS has also been installed. It will take two very large boxes and a smaller box to packaged it up for shipping. So shipping will be expensive. Local pick up is welcome. It operates and all of the cards are good. I will guarantee no DOA. Please make me a fair offer and help me out with this. I will take Paypal F&F, Money Order, Cashiers Check, Personal Check but it will be held until the check clears. GOD Bless and Thanks, rich!
|
Where are you located?
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Richard R. Pope Sent: Thursday, April 16, 2020 5:10 PM To: [email protected]Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA! Hello all, This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories. GOD Bless and Thanks, rich! On 4/11/2020 11:18 PM, Richard R. Pope wrote: Hello all, I hit a deer in WY with my brand new car. They are probably going to total it. My GAP insurance will pay off the loan but I am probably going to be left on foot. I am getting out of working on electronics. I have a HP 16700A LA and 16700B expansion unit for sale. There are 5 16555D cards in the 16700A. The interconnect cable for the the 16700B is here. There are five pairs of cables for the 16555Ds. There are terminators for the cables and clips. The HDD in the 16700A has been upgraded to a Seagate ST 318417N and there is an external HDD and case connected to the system for extra storage. There is also a SCSI CD-Rom drive and a floppy drive installed in the 16700A. The latest OS has also been installed. It will take two very large boxes and a smaller box to packaged it up for shipping. So shipping will be expensive. Local pick up is welcome. It operates and all of the cards are good. I will guarantee no DOA. Please make me a fair offer and help me out with this. I will take Paypal F&F, Money Order, Cashiers Check, Personal Check but it will be held until the check clears. GOD Bless and Thanks, rich!
|