Dave who? There’s probably 250 Dave’s on this forum.

?

Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan

Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan

Where are you located?

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard R. Pope
Sent: Thursday, April 16, 2020 5:10 PM
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!

Hello all,
This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories.
GOD Bless and Thanks,
rich!

On 4/11/2020 11:18 PM, Richard R. Pope wrote:

Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!

Where are you located?

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard R. Pope
Sent: Thursday, April 16, 2020 5:10 PM
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!

Hello all,
This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories.
GOD Bless and Thanks,
rich!

On 4/11/2020 11:18 PM, Richard R. Pope wrote:

Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!

Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!

On Apr 16, 2020, at 7:13 PM, Stephen Hanselman <kc4sw.io@...> wrote:

?Calibrate no, get close probably. ?If you only have one head and a sig gen you REALLY trust you could run the cal procedure. It would be a good/reasonable indicator but not calibrated. You really need to do the meter with the range calibrator. ?

I used to have one but it lives in Eagle Point Or. with a friend of mine. If you were domestic I’d try to get and then do the cal for you.?

Regards,

?

Stephen Hanselman

Datagate Systems, LLC

On Apr 16, 2020, at 13:05, Szabolcs Szigeti <szigiszabolcs@...> wrote:

?

Hi,

Is it possible to calibrate a 431C power meter with a 8477A or do I need a 8402A for this?

Thanks.

Szabolcs

Hello all,
I hit a deer in WY with my brand new car. They are probably going to total it. My GAP insurance will pay off the loan but I am probably going to be left on foot. I am getting out of working on electronics. I have a HP 16700A LA and 16700B expansion unit for sale. There are 5 16555D cards in the 16700A. The interconnect cable for the the 16700B is here. There are five pairs of cables for the 16555Ds. There are terminators for the cables and clips. The HDD in the 16700A has been upgraded to a Seagate ST 318417N and there is an external HDD and case connected to the system for extra storage. There is also a SCSI CD-Rom drive and a floppy drive installed in the 16700A. The latest OS has also been installed.
It will take two very large boxes and a smaller box to packaged it up for shipping. So shipping will be expensive. Local pick up is welcome. It operates and all of the cards are good. I will guarantee no DOA. Please make me a fair offer and help me out with this. I will take Paypal F&F, Money Order, Cashiers Check, Personal Check but it will be held until the check clears.
GOD Bless and Thanks,
rich!

Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot of T&M gear that when setting the date, time, or any other numeric entry, you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.) after you key in the new value. Otherwise, the value will not be updated.
Regards,
Stan

Errm don’t you mean TFT not THT...
Regards
________________________________
From: [email protected]
<[email protected]> on behalf of Bruce
<bruce@...>
Sent: 16 April 2020 20:53:12
To: [email protected]
<[email protected]>
Subject: Re: [HP-Agilent-Keysight-equipment] CorCom F2080 .1uf
capicator replacement

After giving it a bit of thought, Through Hole Technology ????
Quoting Stephen Hanselman <kc4sw.io@...>:

Tubuler film???? The metalized comment makes me think back to the
metal film days.

Purchased parts list says:
Metalized paper as you showed except 250VAC(RMS)
From Artiebolaget Rfia p/n PME 271 M 610. In ‘78 cost a whole $.31

Steve

Regards,

Stephen Hanselman
Datagate Systems, LLC

On Apr 16, 2020, at 13:43, Bruce <bruce@...> wrote:

?OK so I looked them on Keysight find a part - still available.

Part 0160-4065 Zapacitor .1uf +20% 630V Metalized TFT Price $4.30

Anybody know what TFT stands for ??

Cheers!


Quoting "Greg Muir via groups.io" <big_sky_explorer@...>:

Why not look at something like the Vishay 20VL series capacitor?

;!!Aa6LgkyVeQ!58CqW9VYJ1JwW41r4dENlnWP0PJO_S9qNqyvYA31XHt354bekqmwfy5dywqfAMtPSgwbIZk$

I see Mouser has the 0.1 uF/400VAC one (stock # 75-20VLP10-R) in
their stock for $4 and change.

Greg

Oh, what the heck. Why wait for advice? I just bought one, claims to be tested and working, $250. Hmm. Well, nothing more satisfying than impulse buys of new (old) toys that either work or that I get to fix.
Bill
_._,_._,_

?

Hi,

?

Is it possible to calibrate a 431C power meter with a 8477A or do I need a 8402A for this?

?

Thanks.??? Szabolcs

?

No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15886 - Release Date: 08/14/18
Internal Virus Database is out of date.

Hello,
All I have is an ancient R3361. Afaik it doesn't even have a clock. I also have no system menu, only a key labeled Menu but it does not do much.
Tam
------------------------------------------------------------------------
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at
Am 16. April 2020 20:47:14 MESZ schrieb Jesse Lackey <jesse@...>:
Hello all, I'm hoping someone happens to have this unit or related and
can confirm a dumb little thing for me.
I realize this list is for HP gear. If that is strict, let me know and
I apologize in advance. I'm relatively new here. (I do have an HP
4192A 13Mhz impedance analyzer, three HP 3245A universal source units
I'm refurbing, and three 34401A multimeters!)
I bought the Advantest VNA at an auction recently, and the date+time is
forever Midnight Jan 1 1970. The battery was dead (probably long dead),
I replaced it, and ... still nothing. I can't set the date/time, and
the timestamp on the display don't change, curiously. Simply not
running, and all attempts to set it fail. Which is particularly curious.
I can save/restore configurations fine.
The next step is to replace the RTC chip, it is the Epson RTC62423A,
obsolete but obtainable. The crystal is in the chip, and there is no
clock output (firmware reads/writes registers to read/set the time), so
it isn't easily verified via a scope if it is internally running or not.
When the VNA boots up, the RTC self test passes, another curious
thing. It may be only that this chip responds, not that it is actually
counting time.
What would be great to know, as a total newbie with this unit, is that I
am in fact trying to set the time correctly. Here's what I do:
System -> Set Clock -> Year, and the display says 1970. I key in 1971
and press the Year softkey again. The display jumps back to 1970. This
behavior is the same for month/day/hour/min/second.
Thanks all!
J
------------------------------------------------------------------------
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#105065):/g/HP-Agilent-Keysight-equipment/message/105065
Mute This Topic:/mt/73061476/102401
Group Owner: [email protected]
Unsubscribe:/g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
------------------------------------------------------------------------

Tubuler film???? The metalized comment makes me think back to the
metal film days.

Purchased parts list says:
Metalized paper as you showed except 250VAC(RMS)
From Artiebolaget Rfia p/n PME 271 M 610. In ‘78 cost a whole $.31

Steve

Regards,

Stephen Hanselman
Datagate Systems, LLC

On Apr 16, 2020, at 13:43, Bruce <bruce@...> wrote:

?OK so I looked them on Keysight find a part - still available.

Part 0160-4065 Zapacitor .1uf +20% 630V Metalized TFT Price $4.30

Anybody know what TFT stands for ??

Cheers!


Quoting "Greg Muir via groups.io" <big_sky_explorer@...>:

Why not look at something like the Vishay 20VL series capacitor?



I see Mouser has the 0.1 uF/400VAC one (stock # 75-20VLP10-R) in
their stock for $4 and change.

Greg

On Apr 16, 2020, at 13:43, Bruce <bruce@...> wrote:

?OK so I looked them on Keysight find a part - still available.

Part 0160-4065 ?Zapacitor .1uf +20% 630V Metalized TFT ?Price $4.30

Anybody know what TFT stands for ??

Cheers!


Quoting "Greg Muir via groups.io" <big_sky_explorer@...>:

Why not look at something like the Vishay 20VL series capacitor?

https://www.vishay.com/docs/23107/20vl.pdf

I see Mouser has the 0.1 uF/400VAC one (stock # 75-20VLP10-R) in their stock for $4 and change.

Greg