My usual plea.......anybody have a list of 3586c commands? (I never get
manuals with my stuff)...
Thanks to all who replied regarding the peeling meters and all..
73
Tom
|
HP 1631D / HP 10271A / HP 10272A
I have a 1631D with all the Pods, but missing grabbers... And finding
affordable kits has been impossible...
Is it possible to make grabbers myself? I thought the Pods have MTA
156 connectors.. And maybe I can make them..
Thanks,
Maurice
|
HP 4952A software copy protection?
Hi All
I have obtained some software for the 4952A protocol Analyser. These
have been copied using the LIFUTIL utility. However wheras the data
files work fine the applications (things like a VT100 emulator) give
an error "Application Denied". I suspect and have read somthing about
this being some HP copy protection.
Can anyone help or make any suggestions?
Many Thanks
Richard
|
Re: Seeking Manual for HP 204B Oscillator
I have a manual for 204C. If that would do, I can send you schematic; manual
is too many pages to scan. Even better, the whole manual is on BAMA site (
); that site has limited number of simultaneous
log-ons, so you might have to try several times.
Regards
Miroslav Pokorni
toggle quoted message
Show quoted text
----- Original Message ----- From: <leedyt@...> To: <hp_agilent_equipment@...> Sent: Monday, December 01, 2003 1:35 PM Subject: [hp_agilent_equipment] Seeking Manual for HP 204B Oscillator
Does anyone have an e-mailable manual (or at least a schematic) for an HP
204B Oscillator. It would be sincerely appreciated.
Tom Leedy
Clarksburg, MD
|
Returned mail: User unknown
The original message was received at Tue, 2 Dec 2003 22:35:50 0800 ----- The following addresses had permanent fatal errors ----- <greg_werstiuk@...> ----- Transcript of session follows ----- ... while talking to pop3.email.msn.com: RCPT To:<greg_werstiuk@...>
<<< 550 <greg_werstiuk@...>... User unknown 550 <greg_werstiuk@...>... User unknown
|
Re: Seeking Manual for HP 204B Oscillator
Hello, Did You Try Bama. They Have A Few HP
Manuals.
?
Greyhawk
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Monday, December 01, 2003
16:35
Subject: [hp_agilent_equipment] Seeking
Manual for HP 204B Oscillator
Does anyone have an e-mailable manual (or at least
a schematic) for an HP 204B Oscillator.? It would be sincerely
appreciated.
Tom Leedy
Clarksburg, MD
To
unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
Your
use of Yahoo! Groups is subject to the .
|
Seeking Manual for HP 204B Oscillator
Does anyone have an e-mailable manual (or at least a schematic) for an HP 204B Oscillator.? It would be sincerely appreciated.
Tom Leedy
Clarksburg, MD
|
Re: Manual for HP428A Clip on DC Milliammeter
Hi Sam, I have the PDF manual for a 428B model if that will help. Regards, Jim --- sreaves22655 <sreaves@...> wrote: Anyone have an emailable copy of the HP 428A?
Sam
W3OHM
__________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now
|
Manual for HP428A Clip on DC Milliammeter
Anyone have an emailable copy of the HP 428A?
Sam
W3OHM
|
Re: Still looking for 3580A knobs?
--- In hp_agilent_equipment@..., Charles <charlesmorris@d...> wrote: My 3580A spectrum analyzer works great but is much in need of a
set of knobs. All the large ones with labeled "skirts" are either
broken or missing entirely/replaced with nonlabeled knobs. Any
leads appreciated.
thanks
Charles Have you asked sphere? he hasn't those knobs in his list yet, but to ask him is always wise Jorgen dj0ud
|
Still looking for 3580A knobs?
My 3580A spectrum analyzer works great but is much in need of a
set of knobs. All the large ones with labeled "skirts" are either
broken or missing entirely/replaced with nonlabeled knobs. Any
leads appreciated.
thanks
Charles
|
schematics for HP54721 4G amplifier scope plug-in?
Greetings -
After searching the excellent lists from tbfowler,
came up dry. Looking for service lit/schematics (have
the operating manual) for this HP54720D scope 4G amp plug-in
designated HP54721. The cal output on the plug-in is not
working, i can visually trace but, much better to have
schematics, board is multi-layer and I don't have
extenders.
Thanks!
|
Hi Scott, That would be great. Thank you so much Mitch --- In hp_agilent_equipment@..., "Scott" <scott@m...> wrote: Hi Mitch,
I have a 451B service manual somewhere. When I find it I'll be happy to scan the schematics and send them to you.
Scott
_____
I've stopped 3,696 spam messages. You can too!
One month FREE spam protection at www.cloudmark.com
<>
<>
-----Original Message-----
From: aquaman8_2001 [mailto:aquaman8_2001@y...]
Sent: Friday, November 14, 2003 12:37 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment] Schematic for HP651B
Hello All,
I am in need of the power supply and oscillator schematics for an HP 651B I am repairing. I have a service manual but it is for an older
model than mine. My unit has a serial number of 811-03132.
Can anyone help me out with a scan of the 2 foldout pages for this
oscillator? I would really appreciate it. It is not significantly
different from the older unit, but it appears that Si transistors
replace the Ge units seen in the manual I have. To make matters
worse, someone has been in there and made some changes/repairs that
appear to be less than professional! Not sure anymore what are
original parts and which have been changed! The parts pages which
describe thea transistors and diodes used would also be helpful.
Any help would be appreciated.
Thanks,
Mitch
Yahoo! Groups Sponsor
ADVERTISEMENT
< egroup web/S=1705083663:HM/EXP=1068874649/A=1853618/R=0/*http:/www.netflix.co m/Defa ult?mqso=60178338&partid=4116730> click here
< M=267637.4116730.5333196.1261774/D=egroupmai l/S=:HM/A=1853618/rand=921768773>
To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo!
<> Terms of Service.
|
Hello all,
I'm looking for an Hewlett Packard component, for my HP3336B
generator.
It is marked as "1SB1 0021".
Could you please help me to find this component?
Thanks for your courtesy
Best regards
Marcello Pellerano - ITALY
|
Hi Mitch,
?
I have a 451B service manual somewhere.
When I find it I’ll be happy to scan the schematics and send them to you.
?
Scott
?
?
I've stopped 3,696 spam messages. You can too!
One month FREE spam protection at
toggle quoted message
Show quoted text
-----Original Message-----
From: aquaman8_2001
[mailto:aquaman8_2001@...]
Sent: Friday, November 14, 2003
12:37 AM
To: hp_agilent_equipment@...
Subject: [hp_agilent_equipment]
Schematic for HP651B
?
Hello All,
I am in need of the power supply and oscillator
schematics for an HP
651B I am repairing. I have a service manual but
it is for an older
model than mine. My unit has a serial number of
811-03132.
Can anyone help me out with a scan of the 2
foldout pages for this
oscillator? I would really appreciate it. It is
not significantly
different from the older unit, but it appears that
Si transistors
replace the Ge units seen in the manual I have. To
make matters
worse, someone has been in there and made some
changes/repairs that
appear to be less than professional! Not sure
anymore what are
original parts and which have been changed! The
parts pages which
describe thea transistors and diodes used would
also be helpful.
Any help would be appreciated.
Thanks,
Mitch
To unsubscribe from this
group, send an email to:
hp_agilent_equipment-unsubscribe@...
Your use of
Yahoo! Groups is subject to the .
|
Hewlett Packard Service Manuals
Good Morning Gentlemen,
I have sent in a few new HP scans to BAMA.
Good on ya BAMA!
-Richard VK5ZLR
|
Hi, Can anyone help with a copy of the 5062-2119 Data communications
test library that shipped with the HP4951C & HP4952A Protocol
Analyzers?
Am also looking for the service manual for the same equipment.
Many Thanks
Richard
|
Hello All,
I am in need of the power supply and oscillator schematics for an HP
651B I am repairing. I have a service manual but it is for an older
model than mine. My unit has a serial number of 811-03132.
Can anyone help me out with a scan of the 2 foldout pages for this
oscillator? I would really appreciate it. It is not significantly
different from the older unit, but it appears that Si transistors
replace the Ge units seen in the manual I have. To make matters
worse, someone has been in there and made some changes/repairs that
appear to be less than professional! Not sure anymore what are
original parts and which have been changed! The parts pages which
describe thea transistors and diodes used would also be helpful.
Any help would be appreciated.
Thanks,
Mitch
|
I didn't expect to get such an overwhelming response!
To prevent lots of emails about manuals that are
already spoken for, here's what's left, only 30
minutes after my last posting:
=== excerpts of original message ===
Most of the manuals are for relatively new equiment.
Please realize the newer manuals, in 3-ring binders
are heavy, so shipping can sometimes cost more than
you'd expect. Prices shown below include USPS Book
Rate in the US. That service can take 8-10 days, but
quite a bit less expensive than the alternatives.
Power Splitter - 11667A
* Manual has some writing on the front. Low page
count, this one is $2 delivered in the US.
Multiprogrammer 6940A/6941A, Relay Output/readback
Card, model 69433A
* I don't even know what the thing is, but if you have
one and need the manual, here it is. $2 delivered in
the US. Actually, I think it's some sort of automatic
data collection system.
Power Supplies: E3620A. This is a recent power
supply. This manual is surprisingly complete, with
full schematics. There's enough info here that you
could replicate this benchtop low noise power supply.
This is the operating and service manual. $5 delivers
it in the US.
HP=IB conntrolled "system" power supplies:
* This is just the operating and programming manual,
no service info. Models 6632A, 6633A, 6634A.
$5 delivered in the US.
73,
Dave W8NF
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
|
Re: Clearing out HP/Agilent equiment manuals
I'll Take the 3312A Dave NR1DX At 05:59 PM 11/9/2003 -0800, you wrote: Hi all,
Most of the manuals are for relatively new equiment.
Please realize the newer manuals, in 3-ring binders
are heavy, so shipping can sometimes cost more than
you'd expect. Prices shown below include USPS Book
Rate in the US. That service can take 8-10 days, but
quite a bit less expensive than the alternatives.
Microwave Power Meter: These manuals are for the new
EPM series. EPM-441A/B is also known as E4418A/B, and
EPM-442A/B is also known as E4419A/B.
* User's Guide for EPM-441B (E4418B)
* User's Guide for EPM-442A (E4419A) still
shrink-wrapped
* Programming Guide that covers both 441A and 442A
$15 for all three, including Book Rate for 9 pounds in
the US.
Power Sensor - 8484A
* Operating and Service Manual. Pretty small, $2 will
deliver this one anywhere in the US.
Microwave Sweepers - the outstanding 8360 series,
including the 83620, 83630, 83640, 83650 and
variations, including B and L models.
* Troubleshooting Guide, still in the shrink wrap
* Service Guide (not in shrink wrap but in like-new
condition)
The two together constitutes the instruments' entire
service documentation
$15 for the set, including Book Rate for 11 pounds in
the US.
* Also have a second troubleshooting guide for the
sweepers, but not a matching service guide. $9
including Book Rate for 7 pounds in the US.
Spectrum Analyzer - the 8560E high performance series.
These manuals cover ALL the analyzers in that product
line:
* Mass Memory Module (that's the card reader on the
back panel - has its own manual and it's needed to do
programming, downloading, etc), Installation.
Operating, Programming and Service Guide
* User's Guide - this thing is HUGE and covers all the
functions.
* Calibration Guide - bigger even than the user's
guide. Don't think you can calibrate the instrument
with just a scope - this guide includes long lists of
equipment and software required to do the cal, besides
the procedures themselves.
$18 includes Book Rate for 20 pounds in the US for all
three.
Function Generator - 3312A
* Operating and Service Manual
This one's light, so shipping isn't so bad. $4
delivers it Book Rate in the US.
Power Splitter - 11667A
* Manual has some writing on the front. Low page
count, this one is $2 delivered in the US.
Multiprogrammer 6940A/6941A, Relay Output/readback
Card, model 69433A
* I don't even know what the thing is, but if you have
one and need the manual, here it is. $2 delivered in
the US. Actually, I think it's some sort of automatic
data collection system.
Power Supplies: E3620A. This is a recent power
supply. This manual is surprisingly complete, with
full schematics. There's enough info here that you
could replicate this benchtop low noise power supply.
This is the operating and service manual. $5 delivers
it in the US.
HP=IB conntrolled "system" power supplies:
* This is just the operating and programming manual,
no service info. Models 6632A, 6633A, 6634A.
$5 delivered in the US.
I've been selling similar manuals on eBay for a few
years, most of them came from buddies who left the
employment of HP / Agilent and had me helping them
unload remnants from their garages. These are the
last bits I have sitting around and I just want them
gone. First come, first serve, but am willing to
entertain offers on the lot.
73,
Dave W8NF
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
Your use of Yahoo! Groups is subject to Dave NR1DX nr1dx@... "A man who picks a cat up by the tail learns a lesson he can learn no other way" .... Mark Twain
|
