On 8/23/2018 3:55 PM, garp6 wrote:

hi,

Am asking for help from ?Hp / Agilent ?members ?to ?*deposit* ?{ i.e. UpLoad }, to an ?free & Open archive { perhaps, say: ko4BB Web Site, or other ? } :

Any & All HP 70K Software
? ? ? ?related to the HP 70K MMS (hp 70000 series) systems & its individual modules, ROM's, & personality cards, calibration & analysis, etc.

It would be nice to start working on porting this hp 70K MMS software for use on a modern laptop with a USB-GPIB adapter,

Hopefully it would be a group project, with all results posted to a Open & freely available Web Site.

If individuals have any of this software, please attempt to upload it & Let us all know where !

? ? >> ?so that we can attempt to move on this project !!

thank you,

rick

****

On 8/23/2018 10:37 AM, pianovt via Groups.Io wrote:

The 1826-0092 is a selected 1458. It seems the selection was for input drift and output voltage swing.

Vladan

On 8/23/2018 10:53 AM, Fred Thal wrote:

Looking for a later edition Operating and Service Manual for the HP 400 F/FL AC Voltmeter.
Must have manual part number greater than 00400- 90016 (July 1974)
Please reply off-list stating manual part number, price and condition.
Thank you!

On 8/23/2018 10:57 AM, Peter Gottlieb wrote:

There are much higher performing op-amps out there now, with the same pinout and cheap.


Peter

On Aug 23, 2018, at 10:37 AM, pianovt via Groups.Io <pianovt@... <mailto:pianovt@...>> wrote:

The 1826-0092 is a selected 1458. It seems the selection was for input drift and output voltage swing.

Vladan

On Aug 23, 2018, at 10:37 AM, pianovt via Groups.Io <pianovt@...> wrote:

The 1826-0092 is a selected 1458. It seems the selection was for input drift and output voltage swing.

Vladan

On 8/23/2018 10:53 AM, Fred Thal wrote:

Looking for a later edition Operating and Service Manual for the HP 400 F/FL AC Voltmeter.
Must have manual part number greater than 00400- 90016 (July 1974)
Please reply off-list stating manual part number, price and condition.
Thank you!

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Sven Schnelle
Sent: 22 August 2018 19:16
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] HP 70 K MMS software, whole
system, modules & ROM's ( including ... Hp 70909A, 70910A, etc.)

Hi,


i would be interested in all the HP calibration software - not only HP
70k, also for other HP test equipment. I think the easiest way to get
the software running is an older PC where you can run the HP82324A Basic
coprocessor, which is basically a HP9000/300 system.


I'm currently trying another approach - emulating the HP9000/300 system
on a modern PC. I've started to implement a HP9000/300 system using mame
(), so it can be emulated. We currently support
emulating the HP9895 and HP9122C floppy drive, and have HP BASIC
running. What's missing to use that in a meaningful way for HP test
equipment is the ability to talk via IEEE-488 to the outside world.
There's some kind of MAME interface available called IEEE remotizer,
which could be useful for talking to external devices.


Here's a screenshot how HP basic looks in the emulator:





In there are also other pictures of HP-UX
booting in the emulator. the stuff required to boot HP-UX 9 is not
upstream yet (SCSI controller, MMU stuff, etc). Currently i'm mostly
alone working on the project, if anybody on this list feels like
contributing/helping you're welcome to join.


Regards

Sven


On 08/22/2018 07:42 PM, garp6 wrote:

hi,

Am looking for all the software related to the HP 70K MMS system, its
modules, calibration & analysis software and related ROM's.

Although it might be fanciful, the goal would be to have the HP 70K
MMS system running on a modern laptop using a USB-GPIB adapter, and to
also be able to upgrade any ROM's etc, for all of the MMS modules.

This does not preclude anyone who is able to run it on the old HP
computer systems, their help to modernize the HP 70K software suite
would be most welcome.

So wondering if we can collectively assemble a complete archive of any
HP 70K ?software, firmware, etc.?

To proceed, it would need a detailed examination of the original Rocky
Mountain Basic / HP Instrument Basic / HP Basic files needs to occur.
Then to port (or re-write) that software to some more modern computer
we can all use, perhaps Python, C, or VB or something else.
Would hopefully be a team effort, but would certainly be an Open
Project, having the original & the disassembled / reassembled HP 70K
files in an archive.

I worry that any remaining HP 70K software, on diskettes, ROMs',
personality cards, etc. will soon be tossed out, without an archive.
... The old timers that worked on this equipment won't be around forever.
The HP 70K hardware itself seems so useful, interesting and now
recently becoming available at affordable prices, it simply makes
sense to appeal for an HP 70K software archive to be actively
assembled; { along with any un-obtainable documentation }.

I have had some past experience reading and dis assembling /
re-writing old ROM code extracted from instrumentation & some
experience with old RMB & porting old HP Instrument Basic programs to
run on a newer (post HP) TransEra Basic platform using Win Xp.?

Anyway, the quest is for ?any and ?all ?HP 70K software, ROMware, etc.
to be placed in an open, freely downloadable ?archive.

thank you,

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18