Re: Application Note 122: EMI Measurement Procedure
I just checked my banana box of appnotes* and found AN122.
Weirdly, the spine just says "EMI Measurement Procedure" and the big "AN 122" on the front cover is an afterthought, put on there with a slightly skewed rubber stamp.
Subtitled "Calibration and Operation of the HP 851B/8551B Spectrum Analyzer to Measure Electromagnetic Interference"
1st page: "02464-1 Printed February 1968"
154 pages total.
Comes with a Business Reply mail postcard "Please reserve my copy of HP App Noe 63E - making fast emi measurements with a spectrum analyzer". I might fill that out, assuming HP is still at 1501 Page Mill Road and Alan Steiner is still with the Microwave Division.
And like a cereal packet, there's a bonus - a "8511/851 Spectrum Analyzer RFI/EMI Calibration Slide Rule" in on envelope glued to the inside back cover.
Sweet!
* Saw 4 banana boxed of "service manuals" being auctioned on the NZ auction Site (eBay is 2nd fiddle here in NZ), looking at the pictures spotted an HP logo on top of one of the piles - hey, that looks like an HP App Note! - got them for a song - a nationwide courier company owed me a favour (long story) and I got them shipped for free. 1 box of app notes (possibly from the estate of someone high up at HP Australia?), and 3 boxes of service manuals for tape decks, electric organs etc etc. Long tertm plan will be to scan the ones that aren't there already.
Cheers,
Andy
ZL3AG
|
Re: HP 8656A A6 board U1 1020-2933 is bad
Hi Again
There is a seller in Switzerland with three available, but sit down first, they will cost about $60 each plus shipping.
George G6HIG On Friday, 17 April 2020, 00:14:31 BST, Richard Hall <rhall2@...> wrote:
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it.
Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B.
This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you
Richard Hall
WB4RSO
|
Re: HP 8656A A6 board U1 1020-2933 is bad
Hi Richard
HP part number 1820-2933 is a Plessey Semiconductors SP8606B. This is a 1.3GHz divide by two ECL Logic device.
Plessey Semiconductors were manufactured in Swindon UK.
Looks like your A6 Board was manufactured and designed at the HP plant in Scotland.
Now probably hard to come by.
George G6HIG On Friday, 17 April 2020, 00:14:31 BST, Richard Hall <rhall2@...> wrote:
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it.
Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B.
This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you
Richard Hall
WB4RSO
|
vodka -> keyboard
Thanks for that. :)
toggle quoted message
Show quoted text
On 4/16/20 9:15 PM, Andy ZL3AG via groups.io wrote:
Dave's not here, man.
On 17/04/20 1:13 pm, Dave Smith W6TE wrote:
Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Um, more..
-Dave
toggle quoted message
Show quoted text
On 4/16/20 9:13 PM, Dave Smith W6TE wrote: Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
?
*From:* [email protected]
<[email protected]> *On Behalf Of *Daniel Nelson
*Sent:* Thursday, April 16, 2020 6:02 PM
*To:* [email protected]
*Subject:* [HP-Agilent-Keysight-equipment] OT - Ping!
?
Hi Dave - can you contact me offline. Having trouble getting emails to
you...Dan
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Dave...ArtekManuals
Dan and I have been working a a "project" and I wasnt getting his email in a timely fashion as noted
Dave
toggle quoted message
Show quoted text
On 4/16/2020 9:13 PM, Dave Smith W6TE wrote:
Dave who? There¡¯s probably 250 Dave¡¯s on this forum.
*From:* [email protected] <[email protected]> *On Behalf Of *Daniel Nelson
*Sent:* Thursday, April 16, 2020 6:02 PM
*To:* [email protected]
*Subject:* [HP-Agilent-Keysight-equipment] OT - Ping!
Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
-- Dave Manuals@... www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
|
|
|
|
|
Dan
Lots of funky things happening with my emails in last week ..I went looking tonight based on your most recent email and there they were. I have gotten a lot of emails days after they were sent recently. Suspect that all the work and school from home has done strange things to my ISP ???
Anyway I just sent the refund and I see the pages you scanne3d. I will knit that schematic for you so it is continuous
Dave
toggle quoted message
Show quoted text
On 4/16/2020 9:01 PM, Daniel Nelson wrote: Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
-- Dave Manuals@... www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
|
Hi Dave - can you contact me offline. Having trouble getting emails to you...Dan
|
Dave,
Sorry about that. I had Fred on the brain. I live in Reedsburg, WI near the Dells.
GOD Bless and Thanks,
rich!
toggle quoted message
Show quoted text
On 4/16/2020 7:20 PM, Dave Smith W6TE wrote: Where are you located?
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard R. Pope
Sent: Thursday, April 16, 2020 5:10 PM
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!
Hello all,
This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories.
GOD Bless and Thanks,
rich!
On 4/11/2020 11:18 PM, Richard R. Pope wrote:
Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!
|
Fred,
I live in Reedsburg, WI near the Dells.
GOD Bless and Thanks,
rich!
toggle quoted message
Show quoted text
On 4/16/2020 7:20 PM, Dave Smith W6TE wrote: Where are you located?
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Richard R. Pope
Sent: Thursday, April 16, 2020 5:10 PM
To: [email protected]
Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA!
Hello all,
This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories.
GOD Bless and Thanks,
rich!
On 4/11/2020 11:18 PM, Richard R. Pope wrote:
Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!
|
Where are you located?
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Richard R. Pope Sent: Thursday, April 16, 2020 5:10 PM To: [email protected]Subject: Re: [HP-Agilent-Keysight-equipment] FS: HP 16700A LA! Hello all, This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories. GOD Bless and Thanks, rich! On 4/11/2020 11:18 PM, Richard R. Pope wrote: Hello all,
I hit a deer in WY with my brand new car. They are probably going
to total it. My GAP insurance will pay off the loan but I am probably
going to be left on foot. I am getting out of working on electronics.
I have a HP 16700A LA and 16700B expansion unit for sale. There are 5
16555D cards in the 16700A. The interconnect cable for the the 16700B
is here. There are five pairs of cables for the 16555Ds. There are
terminators for the cables and clips. The HDD in the 16700A has been
upgraded to a Seagate ST 318417N and there is an external HDD and case
connected to the system for extra storage. There is also a SCSI CD-Rom
drive and a floppy drive installed in the 16700A. The latest OS has
also been installed.
It will take two very large boxes and a smaller box to packaged it
up for shipping. So shipping will be expensive. Local pick up is
welcome. It operates and all of the cards are good. I will guarantee
no DOA. Please make me a fair offer and help me out with this. I will
take Paypal F&F, Money Order, Cashiers Check, Personal Check but it
will be held until the check clears.
GOD Bless and Thanks,
rich!
|
Re: Calibrate a 431c with 8477a?
The 8477A is the range calibrator, is it not?
toggle quoted message
Show quoted text
On Apr 16, 2020, at 7:13 PM, Stephen Hanselman <kc4sw.io@...> wrote:
? Calibrate no, get close probably. ?If you only have one head and a sig gen you REALLY trust you could run the cal procedure. It would be a good/reasonable indicator but not calibrated. You really need to do the meter with the range calibrator. ?
I used to have one but it lives in Eagle Point Or. with a friend of mine. If you were domestic I¡¯d try to get and then do the cal for you.? Regards, ? Stephen Hanselman Datagate Systems, LLC
On Apr 16, 2020, at 13:05, Szabolcs Szigeti <szigiszabolcs@...> wrote:
? Hi,
Is it possible to calibrate a 431C power meter with a 8477A or do I need a 8402A for this?
Thanks.
Szabolcs
|
Hello all,
This is an update. My insurance company has declared my car a total loss. Please help me out and help this sick old man to stay in a car by buying my 16700B and all of the accessories.
GOD Bless and Thanks,
rich!
toggle quoted message
Show quoted text
On 4/11/2020 11:18 PM, Richard R. Pope wrote: Hello all,
I hit a deer in WY with my brand new car. They are probably going to total it. My GAP insurance will pay off the loan but I am probably going to be left on foot. I am getting out of working on electronics. I have a HP 16700A LA and 16700B expansion unit for sale. There are 5 16555D cards in the 16700A. The interconnect cable for the the 16700B is here. There are five pairs of cables for the 16555Ds. There are terminators for the cables and clips. The HDD in the 16700A has been upgraded to a Seagate ST 318417N and there is an external HDD and case connected to the system for extra storage. There is also a SCSI CD-Rom drive and a floppy drive installed in the 16700A. The latest OS has also been installed.
It will take two very large boxes and a smaller box to packaged it up for shipping. So shipping will be expensive. Local pick up is welcome. It operates and all of the cards are good. I will guarantee no DOA. Please make me a fair offer and help me out with this. I will take Paypal F&F, Money Order, Cashiers Check, Personal Check but it will be held until the check clears.
GOD Bless and Thanks,
rich!
|
Re: Advantest R3767BH VNA date+time setting
Hi Stan, there isn't an enter key, but there is X1. No dice, it is still Jan 1 1970. Tx for the thought tho!
J
Stan wrote:
toggle quoted message
Show quoted text
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot of T&M gear that when setting the date, time, or any other numeric entry, you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.) after you key in the new value. Otherwise, the value will not be updated.
Regards,
Stan
|
HP 8656A A6 board U1 1020-2933 is bad
?I am repairing a HP 8656A that has an A6 board from an HP 8606B in it.
Chip U1 on board A6 has an HP part number of 1820-2933 and the chip is labeled SP8606B.
This chip is bad.
Question 1. Is SP8606B the correct part number for the HP part number of 1820-2933?
Question 2. I have searched for the? SP8606B chip and can not find one for sale without asking for a quote from the obsolete part vendors. Is there an available substitution part number for this chip?
Thank you
Richard Hall
WB4RSO
|
Wanted operator serves manual for HP 8402B
?
Hi all
?
Looking for ?operator serves
manual for HP 8402B
?
Unfortunately Dave at
Artek dues not have it
?
Regards Paul;? ~England
|
Re: CorCom F2080 .1uf capicator replacement
I mistyped - the Keysight listing says THT - Through Hole Technology
Quoting "nigel adams via groups.io"
<nigel.adams@...>:
toggle quoted message
Show quoted text
Errm don¡¯t you mean TFT not THT...
Regards
________________________________
From: [email protected]
<[email protected]> on behalf of Bruce
<bruce@...>
Sent: 16 April 2020 20:53:12
To: [email protected]
<[email protected]>
Subject: Re: [HP-Agilent-Keysight-equipment] CorCom F2080 .1uf
capicator replacement
After giving it a bit of thought, Through Hole Technology ????
Quoting Stephen Hanselman <kc4sw.io@...>:
Tubuler film???? The metalized comment makes me think back to the
metal film days.
Purchased parts list says:
Metalized paper as you showed except 250VAC(RMS)
From Artiebolaget Rfia p/n PME 271 M 610. In ¡®78 cost a whole $.31
Steve
Regards,
Stephen Hanselman
Datagate Systems, LLC
On Apr 16, 2020, at 13:43, Bruce <bruce@...> wrote:
?OK so I looked them on Keysight find a part - still available.
Part 0160-4065 Zapacitor .1uf +20% 630V Metalized TFT Price $4.30
Anybody know what TFT stands for ??
Cheers!
Quoting "Greg Muir via groups.io" <big_sky_explorer@...>:
Why not look at something like the Vishay 20VL series capacitor?
;!!Aa6LgkyVeQ!58CqW9VYJ1JwW41r4dENlnWP0PJO_S9qNqyvYA31XHt354bekqmwfy5dywqfAMtPSgwbIZk$
I see Mouser has the 0.1 uF/400VAC one (stock # 75-20VLP10-R) in
their stock for $4 and change.
Greg
|
Re: Advantest R3767BH VNA date+time setting
Hi Jesse,
Although I'm not familiar with your particular VNA, I've found with a lot of T&M gear that when setting the date, time, or any other numeric entry, you need to press the Enter key or its equivalent (e.g., Hz, x1, etc.) after you key in the new value. Otherwise, the value will not be updated.
Regards,
Stan
|
Dave McGuire
Dave Smith
Paul Bicknell