Tell me how tall they should be. Mine is GPS locked so I don't have the external power supply mounted on my 70K MMS at the moment
I will probably print a foot out tonight after my printer finishes it's current task. Dave
On Tue, Aug 21, 2018 at 6:49 PM, Dave McGuire <mcguire@...> wrote: On 08/21/2018 09:41 PM, tmillermdems wrote:
>>> And I did up a quick 3D model so I might print one up in my spare
>>> time to check model.
>>
>> ?I'd be happy to give it a shot if you send me the .stl file, if you
>> won't get around to trying it for awhile.? Such a thing would be very
>> nice to have on Thingiverse.
>
> It would be nice to get an extended foot for the HP 70k mainframe and
> expansion frame that would accommodate the power module attached to the
> rear.
? Oh wow, yes, that's a very nice idea!? Hey Dave, feel like drawing up
one of those?
? ? ? ? ? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
On 08/21/2018 09:41 PM, tmillermdems wrote: And I did up a quick 3D model so I might print one up in my spare
time to check model. ?I'd be happy to give it a shot if you send me the .stl file, if you
won't get around to trying it for awhile.? Such a thing would be very
nice to have on Thingiverse.
It would be nice to get an extended foot for the HP 70k mainframe and
expansion frame that would accommodate the power module attached to the
rear.
Oh wow, yes, that's a very nice idea! Hey Dave, feel like drawing up one of those? -Dave -- Dave McGuire, AK4HZ New Kensington, PA
|
toggle quoted message
Show quoted text
----- Original Message ----- From: "Dave McGuire" <mcguire@...> To: < [email protected]> Sent: Tuesday, August 21, 2018 9:31 PM Subject: Re: [HP-Agilent-Keysight-equipment] Feet for HP8672A On 08/21/2018 12:29 PM, Dave Miller wrote:
And I did up a quick 3D model so I might print one up in my spare time to check model. I'd be happy to give it a shot if you send me the .stl file, if you
won't get around to trying it for awhile. Such a thing would be very
nice to have on Thingiverse.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
-=-=-=-=-=-=-=-=-=-=-=- It would be nice to get an extended foot for the HP 70k mainframe and expansion frame that would accommodate the power module attached to the rear.
|
On 08/21/2018 12:29 PM, Dave Miller wrote: And I did up a quick 3D model so I might print one up in my spare time to check model. I'd be happy to give it a shot if you send me the .stl file, if you won't get around to trying it for awhile. Such a thing would be very nice to have on Thingiverse. -Dave -- Dave McGuire, AK4HZ New Kensington, PA
|
Re: HP 70 K software Hp 70909A vs 70910A
I do have the receiver personality, which runs on, and came pre-loaded on an 70900B module I purchased. I have not been successful at copying it off the module.
Much of what can be done with the receiver personality can be done manually. When using the spectrum analyzer as a receiver, you typically set the span to zero, so that the RF module is not being swept. Then you tune to the frequency you want to receive by setting the centre frequency.
The receiver personality lets you have more control over the gain of the IF output, and lets you control channel filtering in the 70911A module, which can¡¯t otherwise be directly controlled, as far as I know.
Largely, it¡¯s a convenience feature, as I personally use my system as a front-end for an SDR, and tuning is pretty much all I need to do.
That firmware revision is for the 70900B module. The revision of the receiver personality software I have is A.00.00
I believe that the receiver personality also requires the 70900B to have the 512 option to allow it to have enough memory to store all the program files.
Thanks,
David Slik VE7FIM
On Tue, Aug 21, 2018 at 3:05 PM, Paul Bicknell <paul@...> wrote:
Hi David
Could you help me regarding the Receiver
Personality DLP
?
Have you ever used the Receiver Personality program if so what are the major
advantages ?
?
You refer to the ?firmware revision 94120 [B.05.00].``is this for the local oscillator ?70900
or the 71910 analyser ?
?
You also say it was on a memory card and a
disk ?how much memory dues it require and can it be copied from a local oscillator
?70900 and loaded onto another
?
Sorry for all the questions but I think many
are after the answers to the questions that I have asked
?
Regards Paul
?
Are you asking about the Receiver Personality DLP (Downloadable
Program) for the?HP 71910A wide-bandwidth receiver?
More information on this DLP can be found here:
Specifically, the details on how to install it can be found on page
1-31 of the second document.
There is a memory card version, and a LIF disk version, which requires
connecting a HP 9122 drive.
This personality requires?firmware revision 94120 [B.05.00].``
?
On Tue, Aug 21, 2018 at 1:21 PM, Paul Bicknell <paul@...>
wrote:
Hi rick
?
OK on the posting but please explain the software you require
Is it to enhance the operation of the 70910A
?
?
Or
is it to run on a computer system
?
or
is it to up grade the ?local oscillator that has the software to run the 70910?
providing the revision is late enough? to run your other components
?
also look up 70k
user group
?
Regards Paul
?
?
?
hi there,
I would like to obtain software for the HP 70K system, including that for the 71910
70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ?
thank you,
rick
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
?
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
|
Re: HP 70 K software Hp 70909A vs 70910A
Hi David
Could you help me regarding the Receiver
Personality DLP
?
Have you ever used the Receiver Personality program if so what are the major
advantages ?
?
You refer to the ?firmware revision 94120 [B.05.00].``is this for the local oscillator ?70900
or the 71910 analyser ?
?
You also say it was on a memory card and a
disk ?how much memory dues it require and can it be copied from a local oscillator
?70900 and loaded onto another
?
Sorry for all the questions but I think many
are after the answers to the questions that I have asked
?
Regards Paul
?
Are you asking about the Receiver Personality DLP (Downloadable
Program) for the?HP 71910A wide-bandwidth receiver?
More information on this DLP can be found here:
Specifically, the details on how to install it can be found on page
1-31 of the second document.
There is a memory card version, and a LIF disk version, which requires
connecting a HP 9122 drive.
This personality requires?firmware revision 94120 [B.05.00].``
toggle quoted message
Show quoted text
On Tue, Aug 21, 2018 at 1:21 PM, Paul Bicknell <paul@...>
wrote:
Hi rick
?
OK on the posting but please explain the software you require
Is it to enhance the operation of the 70910A
?
?
Or
is it to run on a computer system
?
or
is it to up grade the ?local oscillator that has the software to run the 70910?
providing the revision is late enough? to run your other components
?
also look up 70k
user group
?
Regards Paul
?
?
?
hi there,
I would like to obtain software for the HP 70K system, including that for the 71910
70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ?
thank you,
rick
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
?
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
|
Re: HP 70 K software Hp 70909A vs 70910A
Are you asking about the Receiver Personality DLP (Downloadable Program) for the?HP 71910A wide-bandwidth receiver?
More information on this DLP can be found here:
Specifically, the details on how to install it can be found on page 1-31 of the second document.
There is a memory card version, and a LIF disk version, which requires connecting a HP 9122 drive.
This personality requires?firmware revision 94120 [B.05.00].
David Slik VE7FIM
On Tue, Aug 21, 2018 at 1:21 PM, Paul Bicknell <paul@...> wrote:
Hi rick
?
OK on the posting but please explain the
software you require
Is it to enhance the operation of the 70910A
?
?
Or is it to run on a computer system
?
or is it to up grade the ?local oscillator that has
the software to run the 70910? providing the revision is late
enough? to run your other components
?
also look up 70k user group
?
Regards Paul ?
?
?
hi there,
I would like to obtain software for the HP 70K system, including that for the
71910 70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ?
thank you,
rick
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
|
Re: HP 70 K software Hp 70909A vs 70910A
Hi rick
?
OK on the posting but please explain the
software you require
Is it to enhance the operation of the 70910A
?
?
Or is it to run on a computer system
?
or is it to up grade the ?local oscillator that has
the software to run the 70910? providing the revision is late
enough? to run your other components
?
also look up 70k user group
?
Regards Paul ?
?
?
hi there,
I would like to obtain software for the HP 70K system, including that for the
71910 70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ?
thank you,
rick
No virus found in this message.
Checked by AVG -
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
|
Re: HP 70 K software Hp 70909A vs 70910A
On 08/21/2018 01:54 PM, garp6 wrote: I would like to obtain software for the HP 70K system, including that
for the 71910 70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ? There are some 70K-series ROMs archived on Didier's site: -Dave -- Dave McGuire, AK4HZ New Kensington, PA
|
Re: HP 70 K software Hp 70909A vs 70910A
hi there,
I would like to obtain software for the HP 70K system, including that for the 71910 70910 ?system & modules, SA, ROMS, etc.
Is there an archive for all of this ?
thank you,
rick
|
hi Walter,
The red ERR LED on the 900a module may just be a temperature warm up time ~ 1 to 5 min., (?) ?to achieve LO oven stability.
Battery ?
rick
|
And of course the screw may be metric or English.?
Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message -------- From: Dave Miller <ve7hr@...> Date: 8/21/18 12:29 PM (GMT-05:00) Subject: Re: [HP-Agilent-Keysight-equipment] Feet for HP8672A
This is what I am looking for I believe I ordered the right items. I guess I will see what I get. And I did up a quick 3D model so I might print one up in my spare time to check model. Thanks Dave VE7HR > On Aug 21, 2018, at 9:21 AM, Patrick Manning <pbmanning@...> wrote: > > D'oh!!? I followed one of the evilBay links sent to him, and as the auction had ended the 'bay "helpfully" suggested an alternate - the all plastic bottom feet used on the 80s-90s era gear.? Guess I should have looked more closely at the original item. > > > -Pat > > >> On Tue, Aug 21, 2018 at 12:04 PM, Dave McGuire wrote: >> >> >>? The OP was talking about the rear feet, not the bottom feet.? But yes, >> the System I enclosure feet are a lot harder to find.? Possibly because >> they're a bit harder to remove. ;) >> >>??????? -Dave >> >>> On 08/21/2018 02:06 AM, Patrick Manning wrote: >>> The NEW style putty colored and grey colored all plastic injection >>> molded feet used on the more modern HP and later gear are readily >>> available inexpensively on the 'bay.? In my experience, however, the >>> older, hard black plastic ones with the spring loaded metal lock button >>> used on 60s to 70s-ish gear are considerably more difficult to come by, >>> and are also typically much pricier when you can find them. >>> >>> >>> Of course, I have a lot of older equipment that takes the latter.? They >>> are something I will be exploring the option of printing at some point >>> in the future when I get an FDM printer. >>> >>> >>> -Pat >>> >>> >>>> On Mon, Aug 20, 2018 at 11:58 PM, Sergey Kubushyn wrote: >>>> >>>>> On Mon, 20 Aug 2018, Ham Radio wrote: >>>>> >>>>> You can make your own with a 3D printer.? Check your local Public >>>>> Library >>>>> - they may have free access to a 3D printer. >>>> >>>> As far as I can tell those are pretty standard HP feet that are >>>> abundant on >>>> ePay in any colors. I seriously doubt 3D-printed ones would be any >>>> cheaper >>>> not even mentioning their poor quality, not even near original feet... >>>> >>>> --- >>>> * >>>> *? KSI@home??? KOI8 Net? < >? The impossible we do immediately.? * >>>> *? Las Vegas?? NV, USA?? < >? Miracles require 24-hour notice.?? * >>>> * >>>> >>>> >>>> >>>> >>> >>> >>> >> >> >> -- >> Dave McGuire, AK4HZ >> New Kensington, PA >> >> >> > > >
|
This is what I am looking for
I believe I ordered the right items.
I guess I will see what I get.
And I did up a quick 3D model so I might print one up in my spare time to check model.
Thanks
Dave
VE7HR
toggle quoted message
Show quoted text
On Aug 21, 2018, at 9:21 AM, Patrick Manning <pbmanning@...> wrote:
D'oh!! I followed one of the evilBay links sent to him, and as the auction had ended the 'bay "helpfully" suggested an alternate - the all plastic bottom feet used on the 80s-90s era gear. Guess I should have looked more closely at the original item.
-Pat
On Tue, Aug 21, 2018 at 12:04 PM, Dave McGuire wrote:
The OP was talking about the rear feet, not the bottom feet. But yes,
the System I enclosure feet are a lot harder to find. Possibly because
they're a bit harder to remove. ;)
-Dave
On 08/21/2018 02:06 AM, Patrick Manning wrote:
The NEW style putty colored and grey colored all plastic injection
molded feet used on the more modern HP and later gear are readily
available inexpensively on the 'bay. In my experience, however, the
older, hard black plastic ones with the spring loaded metal lock button
used on 60s to 70s-ish gear are considerably more difficult to come by,
and are also typically much pricier when you can find them.
Of course, I have a lot of older equipment that takes the latter. They
are something I will be exploring the option of printing at some point
in the future when I get an FDM printer.
-Pat
On Mon, Aug 20, 2018 at 11:58 PM, Sergey Kubushyn wrote:
On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. Check your local Public
Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are
abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any
cheaper
not even mentioning their poor quality, not even near original feet...
---
*
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
*
--
Dave McGuire, AK4HZ
New Kensington, PA
|
D'oh!!? I followed one of the evilBay links sent to him, and as the auction had ended the 'bay "helpfully" suggested an alternate - the all plastic bottom feet used on the 80s-90s era gear.? Guess I should have looked more closely at the original item.
-Pat
toggle quoted message
Show quoted text
On Tue, Aug 21, 2018 at 12:04 PM, Dave McGuire wrote:
The OP was talking about the rear feet, not the bottom feet. But yes,
the System I enclosure feet are a lot harder to find. Possibly because
they're a bit harder to remove. ;)
-Dave
On 08/21/2018 02:06 AM, Patrick Manning wrote:
The NEW style putty colored and grey colored all plastic injection
molded feet used on the more modern HP and later gear are readily
available inexpensively on the 'bay.? In my experience, however, the
older, hard black plastic ones with the spring loaded metal lock button
used on 60s to 70s-ish gear are considerably more difficult to come by,
and are also typically much pricier when you can find them.
Of course, I have a lot of older equipment that takes the latter.? They
are something I will be exploring the option of printing at some point
in the future when I get an FDM printer.
-Pat
On Mon, Aug 20, 2018 at 11:58 PM, Sergey Kubushyn wrote:
On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. ?Check your local Public
Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are
abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any
cheaper
not even mentioning their poor quality, not even near original feet...
---
*
*? KSI@home??? KOI8 Net? < >? The impossible we do immediately.? *
*? Las Vegas?? NV, USA?? < >? Miracles require 24-hour notice.?? *
*
--
Dave McGuire, AK4HZ
New Kensington, PA
|
The OP was talking about the rear feet, not the bottom feet. But yes,
the System I enclosure feet are a lot harder to find. Possibly because
they're a bit harder to remove. ;)
-Dave
toggle quoted message
Show quoted text
On 08/21/2018 02:06 AM, Patrick Manning wrote: The NEW style putty colored and grey colored all plastic injection
molded feet used on the more modern HP and later gear are readily
available inexpensively on the 'bay.? In my experience, however, the
older, hard black plastic ones with the spring loaded metal lock button
used on 60s to 70s-ish gear are considerably more difficult to come by,
and are also typically much pricier when you can find them.
Of course, I have a lot of older equipment that takes the latter.? They
are something I will be exploring the option of printing at some point
in the future when I get an FDM printer.
-Pat
On Mon, Aug 20, 2018 at 11:58 PM, Sergey Kubushyn wrote:
On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. ?Check your local Public
Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are
abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any
cheaper
not even mentioning their poor quality, not even near original feet...
---
*
*? KSI@home??? KOI8 Net? < >? The impossible we do immediately.? *
*? Las Vegas?? NV, USA?? < >? Miracles require 24-hour notice.?? *
*
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Re: HP 6012B volt zero and current regulation
Hello,
all I do know is that Rohde released, some years ago, a
"capacitorless" power supply.
Tam
With best regards
Tam Hanna
---
Enjoy electronics? Join 8300 other followers by visiting the Crazy Electronics Lab at
On 21.08.2018 00:10, Alan Melia via
Groups.Io wrote:
toggle quoted message
Show quoted text
One that doesnt give spikes :-))?
Any supply with feedback linear or switcher is a potential
spike producer !
?
I am not up to date in this area
it is possible that slow-start supplies might be best. Other
members may have more ideas.
?
Alan
G3NYK
----- Original Message -----
Sent: Monday, August 20,
2018 10:06 PM
Subject: Re:
[HP-Agilent-Keysight-equipment] HP 6012B volt zero and current
regulation
OK, I'll bite--
What kind of power supply would you recommend?? I always
thought that a regulated supply would be the safest.?
Were these linear or switcher supplies that produced the
spikes?
Thanks,
Dave
On 8/20/2018 2:31 PM, Alan Melia
via Groups.Io wrote:
During 10 years or so doing
life tests on transistors in the 1960s and 70s I would not
use regulated power supplies for powering the devices
during their life test. When asked, I demonstrated the
switch on pulse with a Tek storage scope. ok it was only
microseconds wide but peaked at the unregulated level.~35v
.....enough to damage 24v transistors.This can also happen
with a transcient load. It is to do with the bandwidth of
the feedback loop.
?
Alan
G3NYK
|
The NEW style putty colored and grey colored all plastic injection molded feet used on the more modern HP and later gear are readily available inexpensively on the 'bay.? In my experience, however, the older, hard black plastic ones with the spring loaded metal lock button used on 60s to 70s-ish gear are considerably more difficult to come by, and are also typically much pricier when you can find them.
Of course, I have a lot of older equipment that takes the latter.? They are something I will be exploring the option of printing at some point in the future when I get an FDM printer.
-Pat
toggle quoted message
Show quoted text
On Mon, Aug 20, 2018 at 11:58 PM, Sergey Kubushyn wrote: On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. ?Check your local Public Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any cheaper
not even mentioning their poor quality, not even near original feet...
---
*
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
*
|
At a cost of about an hour per foot on a fast printer.
-Chuck Harris
Kuba Ober wrote:
toggle quoted message
Show quoted text
20 aug. 2018 kl. 23:58 skrev Sergey Kubushyn <ksi@...>:
On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. Check your local Public Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any cheaper
not even mentioning their poor quality, not even near original feet... Sure ¡ª injection molded parts are great, but the quality of those feet, when 3D-printed out of something strong like polycarbonate on a reasonably priced printer (~$750 range) would be entirely satisfactory. The layers can be thin and the exterior can be printed slowly to make it look just about perfect.
Discounting printer amortization, the consumables for a set of 4 of those feet would be a few dollars at most. You can get a lot of feet from 1kg of material...
Cheers, Kuba
|
20 aug. 2018 kl. 23:58 skrev Sergey Kubushyn <ksi@...>:
On Mon, 20 Aug 2018, Ham Radio wrote:
You can make your own with a 3D printer. Check your local Public Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are abundant on
ePay in any colors. I seriously doubt 3D-printed ones would be any cheaper
not even mentioning their poor quality, not even near original feet... Sure ¡ª injection molded parts are great, but the quality of those feet, when 3D-printed out of something strong like polycarbonate on a reasonably priced printer (~$750 range) would be entirely satisfactory. The layers can be thin and the exterior can be printed slowly to make it look just about perfect. Discounting printer amortization, the consumables for a set of 4 of those feet would be a few dollars at most. You can get a lot of feet from 1kg of material... Cheers, Kuba
|
On Mon, 20 Aug 2018, Ham Radio wrote: You can make your own with a 3D printer. ?Check your local Public Library
- they may have free access to a 3D printer. As far as I can tell those are pretty standard HP feet that are abundant on ePay in any colors. I seriously doubt 3D-printed ones would be any cheaper not even mentioning their poor quality, not even near original feet... --- * * KSI@home KOI8 Net < > The impossible we do immediately. * * Las Vegas NV, USA < > Miracles require 24-hour notice. * *
|
Dave McGuire
Paul Bicknell
Cubdriver
Sergey Kubushyn