Dear Mike,
I¡¯ve had that one.
It may be as benign as the back-up battery needs replacing.
When I first bought mine, which had not been used for at least some months, I would get this eror.
Then I found, after running it for some hours, I could switch off and then switch on a few days later and it would revert to previous settings, without going through the Calibrating¡.. or producing an error.
It has settled down to going through calibration, but no error, if it is not used for more than a week.
Of course it is quite possible that there is a capacitor fault, but, for now, I am building up the enthusiasm for the weight lifting required to get the generator out of the rack, so that I can replace the back-up battery.
Regards,
Alwyn
_____________________________________________________
Alwyn Seeds, Director
SynOptika Ltd.,
114 Beaufort Street,
London,
SW3 6BU,
England.
Tel.: +44 (0) 20 7376 4110
SynOptika Ltd., Registered in England and Wales: No. 04606737
Registered Office: 114 Beaufort Street, London, SW3 6BU, United Kingdom.
_____________________________________________________
