Re: Measuring Phase with Agilent E5062A ENA
|
Dr. David Kirkby from Kirkby Microwave Ltd
On Sun, 18 Nov 2018, 01:45 Gedas < w8bya@... wrote:
Can someone point me to some reading material to help me
understand how to measure phase on my ENA?
You could save the data as a Touchstone file the import it into the software used for the VNWA.
and display as "c. phase" which is the phase unwrapped - I assume the c is for continuous.
Does your ENA support any sort of macro/programming? If so, you might be able to program something in there to unwrap phase.
There's no doubt the ENAs are pretty poor compared to the PNAs. The ENAs were developed in Japan and the PNAs in the USA. Support on the older ENAs on the Keysight forums is almost nonexistent.? The latest ENAs run the same firmware as the PNAs, so things are different.
I have the firmware of an ENA running on a PC (actually a virtual machine) as an emulator, but the ENA software is quite poor.
Dave, G8WRB.
|
