开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. H390-DOSVS
  2. Topics

DOSVS R34 Manuals?

 

Does anyone have manuals for Release 34?
I'm especially needing the Messages manual.? I'm getting message number:
? 4886D TAPE UNIT NOT READY? ? ? ? ? ? ? ?OUTTAPE? SYS011=281


I don't remember the proper response. I'm running DOSVS as a guest under VM/370 and I first issued a 'devinit 480 tapeout.aws'?command and then '/attach 480 DOSVS 281'.?
I think that's the correct sequence of commands.

TIA?
Jim Snellen
 

On Tue, Dec 29, 2020 at 07:02 PM, Jim Snellen wrote:
I don't remember the proper response.
?
4886D? TAPE UNIT NOT READY
?
? ? ? ?Cause: A sense command was issued to a not-ready tape drive. The sense is made to
? ? ? ?determine if a file protect ring is needed.
? ? ??
? ? ? ?System Action: If SYSLOG is assigned to a keyboard, the system waits for an operator
? ? ? ?response; otherwise, the job is canceled.
?
? ? ? ?Programmer Action: none.
?
? ? ? ?Operator Action: Type CANCEL or press END/ENTER to cancel the job, or make a tape drive
? ? ? ?ready and type IGNORE to continue processing, or
? ? ? ?Mount the tape on another tape drive and rerun the job.
? ? ? ?If the problem persists, have the system log available for problem determination.

Cheers,

Rene FERLAND, Montreal
 

Thanks Rene.

Type CANCEL or press END/ENTER to cancel the job
If I key CANCEL or press END/ENTER, the job cancels as it should.
or make a tape drive?ready and type IGNORE to continue processing,
I typed IGNORE and the message appeared again.? How do I make the tape drive ready?

Mount the tape on another tape drive and rerun the job.
I will use another address (480/280) and see if it works.?

It appears you copied text from a manual since it sounds "IBMese".? Could I get a copy?

Jim
 

On Tue, Dec 29, 2020 at 07:36 PM, Jim Snellen wrote:
Could I get a copy?
Sure, you can find it here:



We don't have the messages for Release 34, but they are available for Release 29 (better than nothing). :-)

Cheers,

Rene FERLAND, Montreal
 

The manuals issue is resolved.

I've also created a tape using VM (TAPE/VMFPLC2) and DOS/VS (RPG).

Thanks.

Jim Snellen

1 - 5 of 5