开云体育

I have this exact same issue. ?What did Michael do to correct the issue?

Thanks everyone for your help. I also got a nice email reply from Michael Herman, who has kept my 16 year old Losmandy Gemini-1 functioning quite well. He really knows electronics, especially the

Page 6 of G1 manual.....see "help" ( https://gemini-2.com/faqG1.html ) menu G1 Lvl4 ['The telescope can be parked at any "Home Position" by either the hand controller or serial control. The home

Yes, Home can be any position you want.

Hi Russell, I am not familiar with gemini-1 but you can absolutely use a different position to park your mount. With G-2 you simply slew the mount to your chosen position and set that as your new home

Is it possible to set home position other than counterweight down for a 2008 G11, Gemini-1? I am planning for a slide off roof observatory for my Losmandy G11 and Celestron-11. Having a home position

This website that was recommended to me is also very useful. I followed this procedure exactly with my G11 gemini 1 lvl4 and everything works great and without issue.

Hi David, You need the part that plugs into your laptop USB port, usually we recommend using the ATN brand USB to RS232 cable which has the rectangular USB type A? on one end and a kind of clunky D

Hi David, you don't need to configure the pass-through port -- that's advanced functionality for non-ASCOM applications to talk to Gemini directly, by bypassing the driver. You want to configure the

Hello all. I am attempting to connect my mount to my PC and am stumped. Please understand that this kind of thing is not my forte and I'm very ignorant of these kind of things I have a Michael's

Brendan's and Paul Kanevsky's recent replies echo my experience and what I think I know about Object Search.? When you're looking through an eye piece, the mount's movement is easy to see.? As I

Beep is either: *Autoguider error aa in an Ra +/- signal at the same time *A motor was not connected properly and encoder signals were missing * A motor stall, or Mount at limit! (The system may think

So I just got it to work during the day. I saw definite movement on the Dec axis as it was searching the 2? field. But here's the strange thing. ?When I first powered the mount up it gave a long

If the mount responses to Ra and Dec button presses and slews! It’ll work! As FOV search is just micro movements commanding function. ? The mount is more than capable of performing at slew or

I will try it at night but I’m a bit skeptical of this. ?I watched the RA and Dec setting circles quite carefully for the couple of minutes it was running. ?They didn’t move with respect to the

Bill, Unless you are tracking at night you are unlikely to be able to perceive the movement. Paul

I’ve never used the function before, and I use G2 also so, take my comments with some salt attached. The mount moving at center speed is quite hard to see so, not seeing it move is no indication

If you select the HC select “display Ra\Dec” it will display current ….. if you had selected “search FOV”. I guess it’ll show the changing values. Or connect Gemini ASCOM then do “FOV

Strange, unless you have the center rate set too low? I don't have access to Gemini-1 to test right now, but I recall that function working as advertised when I did use it.

Yes, I’ve read the manual. ?I picked the largest FOV available (2° ??) and let it run for a couple of minutes. ?Absolutely no change in the RA or Dec that I could see. ?Yet you could hear the