开云体育

The FTDI I/O chip is the gold standard which is why there are so many fake FTDI chips in the market stream and why I recommend buying a converter from a supplier that only uses authentic FTDI chips

Fully agree on using FTDI chipset -- historically these have been more compatible and stable converters for use with Gemini. Regards, -Paul

Digikey has a good range of adapter USB to RS232 like: https://www.digikey.com.au/en/products/detail/adafruit-industries-llc/18/5353575 uses FT232L chipset (FTDI) $18 **FTDI** **** UT232R-200

On Sun, Dec 8, 2024 at 01:40 PM, Will wrote: > > Fabien, inexpensive USB to RS232 adaptor cables are on Amazon. > -Will > > On Sun, Dec 8, 2024 at 12:18?PM Ma Ol via groups.io ( http://groups.io

Look at this adapter https://amzn.eu/d/aSVSIdp [email protected]> escribió:

Fabien, inexpensive USB to RS232 adaptor cables are on Amazon. -Will [email protected]> wrote:

I learn something new every few minutes, I have a memory like a goldfish LOL. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena Astrospheric Signature (

Thank for the explanation. I learnt a new knowledge ;-) [email protected]> escribió:

As Brendan suggests it is best to establish that the Gemini 1 RS233 port is working by connecting to a PC via USB to RS233 converter cable before trying to connect to anything else. Connecting to a PC

This is incorrect.? ASIAIR has always worked with non ZWO mounts even before there were ZWO mounts using either Ethernet or USB I/O ports. -- Chip Louie Chief Daydreamer Imagination

I think all ZWO products are limited to be used with ZWO products only. [email protected]> escribió:

Hi, I try to connect GM8 on a ASIAIR, not on a PC. [email protected]> a écrit :

Did you download the corresponding driver? Look at the screenshot. [email protected]> escribió:

Fabien take a step back ……use Gemini ASCOM try connect using it and Gemini. /g/Gemini_ASCOM_Driver if doesn’t work …..you probably have a bad Gemini Rs232 IC. if it

Hi, I've a Losmandy GM8 Gemini 1 and an ASIAIR+. I can't connect GM8 to ASIAIR - with he the original cable serial/RJ9 with another serial/usb - with GeminiFI module Wifi - with the Losmandy cable USB

What is your configuration? If you have stepper motors then you probably don’t have Gemini. If you do have Gemini, which one, Gemini-1 or 2?

I am unable to move my stepper motors with my hand controller. I have made sure that pec is turned off. I purchased my G-11 in 2005. How to I fix this?

Thanks so much, Brendan—just what I was looking for. I'll carefully go through your suggestions and take a look at D1 as well. I'll let you know once I make more progress with the

Annnd I should have said check battery voltage is getting to the SRAM/RTC thru D1. https://gemini-2.com/faqG1.html#Q15 Maybe check diode D1 with ohmmeter on diode function. ? Check it switches ok

And welcome. ? Good to hear G1 users and that these venerable units will outlive us and be handed on! Wonderful equipment and mounts. -- Brendan