开云体育

Tom I think there are workarounds for the camera to get it working. Check the mount boots, you don’t get SRAM reset or off things on boot. ? The Gemini 1 keeps settings saved in SRAM that are

Hello, I'm looking at purchasing a G11 this weekend. The drive is about 3 hours and I have limited knowledge of this mount - it will be my first equatorial mount. From the photos sent, it is last

I just want to be clear synchronizing each target is on the Air Object screen not on the G1 hand controller.

1) Goto no RA-Dec update I think I figured something out I had this happen last week. For some reason I got to thinking about this and went back to last target. I had been synchronizing each target

Hi Trevor, thanks, that's what I wanted to find out. Initial L6 release did have some issues with Southern hemisphere that were fixed in L6.02. Since you're on L5 still, these are not relevant at this

Thanks for all that but I don't actually feel comfortable with the prospect of doing all this for an upgrade when my current system works OK - as I asked are there any special requirements with my

Hi Neil, Goto limit was indeed introduced in Gemini-1. It defines an zone (in degrees) prior to the safety limit where a Goto to a target will result in a meridian flip. Default is 2.5 degrees or 10

Hi Paul Sorry, I forgot to answer your question on the ASCOM driver in use [image: image.png] -- Thanks and Best Regards Neil

Hi Paul Safety limits in Gemini are: - West 123 East 98 [image: image.png] Is a goto limit different to a safety limit? I don't see any goto limit settings anywhere. Maybe it wasn't a thing

Hey Neil, What version of the ASCOM driver are you using? Also, what are your Eastern safety limit and Western Goto limit settings? These all play a part in the meridian flip

Neil, Interested in this too as I just (last week) found this video. - Jerry

Hi All So I'm doing some testing with N.I.N.A and focusing (no pun intended) on the Meridian flip. I've watched the Losmandy podcast where Edward Plumer covers this topic in wonderful detail and I'm

Thanks for feedback Bill. well done, cheers -- Brendan

Yes, it turned out to be a bad cable.

My question is if you’re in the menu and using Object entry like M??? ?can you move move the cursor forward back up and down ? I had an issue where I couldn’t move or change number or letter with

Thank you, sir :) All sorted. -- Thanks and Best Regards Neil [email protected]> wrote:

Yes, 100%? Do you have a copy of the Gemini manual?? Look at *Rene Gorlich's website* ( https://www.docgoerlich.de/Gemini.html ).? Rene is the genius behind the Gemini main board firmware. Also

Hi All Is it possible to rename and reconfigure the sites stored in "Site Information"? I have updated the "Hollywood" coordinates to my home coordinates but it now just shows as "User Site" The

Some additional links for you. Here is the *Gemini GFU page on gemini-2.com* ( https://gemini-2.com/GFU-download.html ) Here are the files you need if you have an Ethernet connection to the Gemini 2

Hi Trevor, It's not just three files.? You need to download the latest GFU program which will automatically update to the new L6.0x firmware for the Gemini 2 main processor and Hand Controller