On Sun, Mar 13, 2022 at 07:21 PM, Paul Romero wrote:
the new motor, upon putting everything back together races uncontrollably and then stalls.
This sounds like a situation I had last year and the only solution that worked was replacing the Gemini 2 PC board entirely - now $500. But same thing, the Dec? motor would race at high speed for several seconds then stop in a place the Gemini 2 could not identify. I would check or replace cables, or try to straighten out the pins, but you may have to go the pricey route. You could check continuity for all connections with a multimeter into the board, but after that, there may only be the one solution.
Good luck,
John
