开云体育

HI Greg no specific date at this time. We are focused on supporting everyone upgrading to L6. It is the next big thing on the list wrote: -- Brian Brian Valente astronomy portfolio

Sorry, I meant 180 degrees from the Cold Start position. It was a long day yesterday and I got my right angles from straight lines mixed up! When looking down on the DEC axis, 180 degrees clockwise

Received the upgrade kit and updated to L6 on Tuesday this week.? As I mentioned before, all went well with no issues upgrading. "at the bench".? I took screenshots of my L5 setup before I upgraded

I want to report another successful upgrade using Linux. I used a PickKit3 clone and MPLAB X. My only issue was apparently from formatting the SD card as FAT16.? I ended up saving a copy of the L5 SD

Brian, When can we expect to see PEC support in L6? -Greg

Hi Steve, if everything was working fine before you don’t need to change anything. Keep your old settings. Regards, -Paul

Hi all, I received my L6 upgrade kit today and successfully updated my mount to L6 and new firmware.? I was going through the updated Gemini 2 driver settings and was wondering if there was any

Do you mean 90 or 180?? If the dec axis really won't go more than 90 degrees from the start position, then you can't aim at anything south of the celestial equator at all!

Hi Bill, I encountered stall and guidance problems when imaging M8, M20. Their close to 90 degrees from cwd position. Oops I meant 180 deg. Thanks for the tip! Paul

I have one suggestion for the list and that’s the behavior of the DEC axis 90 degrees away from the CWD position. Apparently the new firmware will prevent the mount from rotating a full circle at

The point here was slewing is where power is peaking, not tracking. Most of the night is tracking, not slewing The ramping and acceleration axis offset features are still the same acceleration ramps

I had brought my Gemini to Losmandy a week ago for the level 6 upgrade. I had used it several times since, without issues. Until last night. See images of screenshots from my iPad running asiair plus.

David I believe you meant to say:- The main current draw is on acceleration and it is mitigated by acceleration ramps and individual axis travel. Both these features have historically been in my

yes sorry thanks for the fix there David ;) The main CURRENT draw is when slewing. david.partridge@...> wrote:

I think you meant to say: The main CURRENT draw is when slewing. David Sent: 29 June 2023 16:03 To: [email protected] Subject: Re: Voltage; was: Re: [Gemini-II_io] L6 Pic Programming Kit Arrived -

Edit: (typo and additional thoughts) As Paul has mentioned, the voltage range (12-18v) and recommendation to use higher voltage has always been the case since the Gemini was introduced in early 2000s.

As Paul has mentioned, the voltage range (12-18v) and recommendation to use higher voltage has always been the case since the Gemini was introduced in early 2000. There is nothing new about the power

Good idea to collect these, Bren! If anyone wants to forward me additional ones that could be useful to others, I can add them to the FAQs on https://gemini-2.com ( https://gemini-2.com ) website.

NIce, thanks for the update Jim You can ignore my suggestions from support ticket (again) :) Brian

Thanks Bren We're already on that, and your list is nearly the same as mine (i have a few additional ones). We have a podcast and updates planned for exactly this topic It's been a short period of