开云体育

Chuck, I’m sure you will receive lots of good advice from members on this forum. I have taken the path of using ZWO cooled cameras (for deep sky objects) and un-cooled cameras with high frame rates

I also have a C14 on a G11. They are great but not perfect by any means. I have a hyperstar system. I use this always. I have it paid with a DSc10TEC. I'm by no means know what I'm doing,? only by

It should boot noticably faster. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

Sounds like it was updated, Ken. The main thing to notice is the faster boot time. From the time you flip the power switch to the time the HC is initialized.

Ignore, it was just that RA/DEC cables were not plugged in when the upgrade happened. > > > >

Hello again! Didn’t mean to sound like I was pouting my way out before. I honestly wanted to make sure I was prepared to answer the questions folks had, and running our observatory isn’t as big

One other thing. Has anyone had any ticking sounds coming from the unit (Gemini-2) afterwards? Mine now ticks every second or so. Thanks, Ken

My upgrade appeared OK. Is there a way to double check the new bootloader is actually in (apart from the Keil OK and Finished messages)? Thanks, Ken

As always, thanks.

IIRC, you just start from the position you're in. The model should be reset automatically, so you just need to start building a new one from where the mount is.

Paul sorry to bug you again but I've watched the videos on "PAC" and also read the manual but I still have a question.? If this strictly visual guy decides to get OCD about alignment, after

Perfect!? Thanks!? That explains it!

The stars that are picked for model building for each side might be on the same side of the meridian. You can read some of the details here: https://gemini-2.com/hc/En-SAE-01.html

Hey Paul, while I have your attention another question I have is regarding modeling and "west" vs "east" stars the Gemini offers.? While the pointing accuracy is fine when I do proper alignment and

Pretty sure I tried that but will give it another try.? Thanks.

Sorry, I don’t know. It could be HC, its cord, or even Gemini.

Select WDS catalog in the HC, then delete anything already entered on the screen and enter 08122, then hit enter.

Thanks Paul... I somehow missed the SAO catalogue as an option (I saw it just didn't make the connection) so will try that my next clear night.? I tried WDS but it kept saying "not found" when I

Definitely use SAO if nothing else works. WDS (Washington Double Star catalog) is available on Gemini, so you'd search for WDS 08122 to find Tegmine from Gemini HC.

I would also check the cable, and then verify that the microSD card in the HC is seated properly. That might be hard to reach, so be careful not to destroy anything in the process of checking.