开云体育

Brendan, Thanks for your comments. I'll look into Michael and David. Ken

Seokman, You are not alone. I’ve had the same thing happening to me for a few months now. It happens every session. At this point I check to see if PEC is still enabled after the sequence has been

It keeps turning off in the middle of a session, not at the beginning? That's strange. ASCOM 7 is the common ASCOM platform across all mounts and devices, it doesn't know anything about Gemini or how

I just upgraded Gemini firmware and ASCOM 7 software and the mount keeps turning off PEC while doing imaging session. Sometimes I see PEC checkbox is unchecked from Gemini hand controller screen. I

Kenneth. ?I’m pretty sure this early 1st ver HC is no longer supported by Losmandy ? ?Mainly due to lack of displays available and obsolescence of this display and other parts and improving the

I just fired up Gemini and noticed that same date anomaly. Time is fine.? Attached are some screenshots that might help. Does not seem to have any affect on the performance.? Goto's worked just

René, David, Naturally there are several ways to look at the usage of these words, but IMHO - when used in this context "Built" refers to a previous action, whereas "Build" refers to the current

Though TBH “Built” works well also Sent: 27 February 2025 08:31 To: '[email protected]' <[email protected]> Subject: RE: [Gemini-II_io] February 29th abnormality I’d normally say build for a

I’d normally say build for a build number with out obvious meaning. For a date, I would say “Build Date” Sent: 27 February 2025 07:04 To: [email protected] Subject: Re: [Gemini-II_io] February

Hi Ed, Thanks for the detailed description! I'll check this. If I should find something I can't supply a fix until tomorrow, but I guarantee to fix that in time before February 2026! ;) Firmware

Hello all, After performing a recent firmware update on a Gemini II mini-controller on a GM811 (received new from Losmandy in early 2022), I noticed that the Hand Controller is displaying February

Brendan, Thanks for your comments. I'm not that good at soldering, and I learned a long time ago I don't do great with electronics repairs! So, I'll write to Losmandy and see what they have to say.

I wonder if Michael Herman ( https://gemini-2.com/G1-repairers.html ) has some? Sending one.....you need to be capable soldering as you have to remove the old and resolder the new and getting

David, I'm in the United States, Illinois, to be specific. Thanks! Ken

It’ll be 1st version that needs soldering down. ? Maybe try use a small plastic “spludger” (use to take iPhones start) But sounds as if touch screen overlay is dead and you have to replace the

Ken Where on the planet are you? I have some of the touch screens but I probably isn’t economic for you unless you’re in the UK David Sent: 24 February 2025 14:58 To: [email protected] Subject:

I have a G-11/Gemini II that has not been used for a number of years. I recently decided to return it to active service given some new observing interests, and I found out that the HC won't respond to

You may find it helpful to add an entry for gemini in your hosts table. Location in windows is \Windows\System32\drivers\etc\hosts file. If you have a static address for the gemini you should add it

Hi All, I was able to reach the Gemini 2 through my PC by directly connecting the Gemini to my router using an ordinary ethernet patch cable, so everything is now up to date. Switching to terrestrial

Thanks for elucidating that. I stand corrected. Obviously I meant a switch. And he actually has one already he can use if he decided to pursue this path. F. X. Flinn e: