开云体育

Hi Ryan, The two checkboxes simply enable meridian flip point functionality or turn it off for each side of the mount. When it's off, Gemini behaves just like it did prior to L6. Flip points are

Paul, Do you mind a giving a 30 second explanation to the flip point configuration on the upgraded web interface with 6.1? There are some new fields here: -Eastern Meridian Flip Point

Thanks Ray. ----------------------- Jim W Phoenix, AZ USA

It’s available for use, but the trick is figuring out the time difference between Gemini oscillator and 12MHz so that the clock rate adjustment can be made. That part is still being researched and

The first version of GEMPro is a cut-down version of PEMPro that I finished months ago. I was planning to build it from scratch, but it was much easier and very much quicker to remove support from

Is this still being developed?? What's the current status? ----------------------- Jim W Phoenix, AZ USA

Thanks for the reply.? I was changing the aggression settings to see if that made a difference.? No difference. During the asiair calibration, it indicates that it is clearing backlash.? But, i

I find the ability to implement even better tracking intriguing. ?Is there any additional information available regarding implementation of Serial command 70? does this command 70 require additional

The GFU app pulls the latest available firmware versions from the web by accessing gemini-2.com website. If your internet is disconnected or very slow, it's possible that the firmware versions listed

Hi all, I did something "funky" and got my GFU download from the Gemini webpage, as opposed to the link in Paul's initial msg in this thread. I did not check the version before pressing "start" (I

I am not an expert, so take this with a massive grain of salt...looking at the graph you have very high aggression settings, but the mount is apparently not responding to corrections as the numbers

Hi Paul, I finally had time to set things up so that I had both the Gemini and my Eagle 4 Pro connected via Ethernet into my router. Updated everything using GFU; worked like a charm. Thanks! John

I recently added an RA extension and 12" pier extension to my g11 mount.? I wanted to improve functionality around the meridian and these upgrades did exactly that by reducing the time I need to wait

I have the ZWO 174 MM mini in their OAG-L with AA+ and it works well. “Unity” gain is 68 and if you choose medium gain in the AA+, I think that is where it sets it. I just leave it at 68 for 90%

John & Chip, Thanks for both of your help.? The ethernet connection is up and running, and I really like the responsiveness of Gemini with this connection. Also the convenience of a virtual hand

Hello everyone, I'm transitioning from primarily visual observing with the Gemini-II system to astrophotography and would appreciate some advice. My current imaging setup is as follows: -

I did that in anger while trying everything, everywhere all at once.

You might also want to update to the latest Gemini 2 and Hand Controller firmware, L6.1 and v1.63.? I don't know if it would directly impact this particular issue but they did a few nice things and

Thanks Paul!

Windows 7