开云体育

Here is the concept I have for your observatory. Use a good managed USB hub with power on the telescope like a Pegasus Pocket Powerbox Advance Gen 2 with all your USB peripherals like cameras, filter

Here is the router to use in the COLD room by the pier.? This is the best compromise between Wi-Fi speed and feature balance for this use.? I use this on my garage imaging system with a new style

I would not expect that level of accuracy on a naked mount unless you have a PEC loaded into the mount - maybe. One simply uses PemPro on a Windows PC to create that. Losmandy RA gear is the issue.

Yes Losmandy mounts can guide reliably under 0. 5" RMS but unless you are imaging at 14,000 feet and have perfect conditions the mount regardless of brand will never be the imaging limitation

On Fri, Nov 22, 2024 at 05:00 AM, <sctom1@...> wrote: > > Thanks to you both. ?Very interested in the ethernet option, which is the > eventual plan for the scope mounted PC. ?How would I do

First off, no internet is needed for the ethernet connection.? I'll repeat, NO internet is required. This is a common misconception that you must have internet to connect via ethernet.? You do not.

John it sounds like you got the hang of it now, but I'm finally back home and I've attached my NINA Advanced Sequencer Dawn SkyFlats template in case anyone else wants to try it out. This works

Thanks to you both. ?Very interested in the ethernet option, which is the eventual plan for the scope mounted PC. ?How would I do that out in the field where there is no internet? ?I am computer

Received wisdom is that below 0.5" you are atmosphere-limited.

Hi, I'm looking to buy a mount that guide my reduced C8 (1450mm, 0.5"/px) at 0.37" rms or better. see this link for details: https://www.astrowithroro.com/guiding 203 mm aperture, 1450mm focal length,

Hi sctom1, The hand controller cable is actually an RS232 (serial) communications cable. If you use it at 9600 baud, serial cable can be fairly long, 15m or longer. A lot? depends on cable

Ron, what version of ASCOM driver are you using? Can you try the latest, from here: /g/Gemini_ASCOM_Driver/files/Test#:~:text=GeminiTelescopeInstaller(1.1.30.0).exe If that still

I know this is not your question but here is another solution that resolves the problem of having hand controller access in the wa

I looked for this, but I couldn’t find it anywhere so apologies if it is somewhere and I overlooked it. What type of cable is between the hand box and the Gemini II and what is the maximum length I

Hi Ron, I use N.I.N.A. and connect to my mount with USB also and I don’t recall this having happened before so, I’d say it’s not a N.I.N.A. issue :). My first thought is, are you trying to use

On Tue, Nov 19, 2024 at 04:39 PM, <Tjkallenbach@...> wrote: > > Thanks Chip, > I sent my Gemini in to Losmandy about 5 months ago, they installed version > 6.? The polar align is not really a

Hello, Group. I am trying to get my Gemini to connect to my laptop via USB, so that I can use both The Sky 6 and N.I.N.A. for observing/and imaging.? My old Gemini I worked well using a Serial/USB

Ah, good suggestion - I had use the slew to alt/az but didn't even think about tracking stopped instruction. Thanks!

That is interesting, a 90/90 in the Advanced Sequencer places my mount on the eastern side ready to track CW down…possibly because of my go-to Western Limit. Doesn’t matter too much given that I

You would likely want 90/270 so that the mount continues to track westward from the meridian with counterweights down.