开云体育

I tried with the other G2 – that was the last log of the set you received in the zip file The BT serial adapter works perfectly with my G1, and the cable tests clean for continuity ? D. Sent: 25

The tactile buttons always work for me (you must be on the screen with diamond buttons on the touch screen). They also allow acceleration to the next higher speed, but not beyond. I can't accelerate

Hmm. I didn't have that issue after the restart. I'll try a few more times to see if there's some sequence that leads to this state. Anything in particular that you do before you try to use the

Looks like it's working... but not every time. Something's wrong with the connection, serial converter, or the serial port.

Here’s the Diagnostics which seem (to me) to suggest the coms is sort of working but (for example): 16:57:14.953 Serial wait for response TID:11 [0]: :GA 16:57:14.964 Serial received: TID:11 [0]:

I haven't tried to use the serial port on the G2 I have so it's possible that it's broken as the G2 wasn't new when Tanya sent it to me for developing the Servo firmware. Here's what I had with my G1

Yes, I did restart – several times in fact as I’m trying to get serial coms working (but that’s for another thread). Sent: 25 October 2024 15:28 To: [email protected] Subject: Re:

The 6.05 and 1.63c betas seem to work fine using normal hand control operations for visual and with ASIAIR Plus v3. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena,

I just heard back from GL.iNet tech support and the Slate-AX is not 12v tolerant.? So as expected you need to use a 5v power source. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric -

Hi David, Did you restart Gemini after the new HC firmware was uploaded to the HC? I had a similar experience, and it all cleared up after restarting Gemini. Regards, -Paul

I've just applied 6.05 plus 1.63 to my G2 and HC. I have "allow speeding up" set, so I expected the HC buttons to work like the G1, going from Guide speed to Centre speed to Slew Speed if I hold

I have L5 hardware and was wondering for southern Hemisphere are there any special requirements in the set up of the mount or while using NINA for it to perform a meridian flip, thanks

Hi Steve, Brian isn't visiting here very often anymore, so let me attempt to give you an answer. No, don't change the worm setting. You don't need to do 2x worm cycle recording/programming. You can do

Hi Ken, Totally up to you. The beta seems pretty stable, and has bug fixes and enhancements, so should be worth an upgrade. v1.63c of the HC and L6.05 are now available (

Hi, I am just about ready to update and test this beta but it has been a while since posts and wanted to check whether you need any more or should I just wait for MR. Where are you at with it? Thanks,

On Tue, Oct 22, 2024 at 04:31 AM, David C. Partridge wrote: > > > > Hi Paul, > > > > > > > > That seems plausible even if it fails the aesthetic tests. > > > > > > > > Thanks, David > > > > > > > >

On Tue, Oct 22, 2024 at 04:33 AM, Joel Black wrote: > > On Mon, Oct 21, 2024 at 08:50 PM, David C. Partridge wrote: > >> >> >> That Slate-AX sounds great apart from the USB-C port for power.?? I

Brian, (Just took delivery of a GM11T; works great and now refining) On page 2 and 3 of your guide /g/Gemini-II/files/Documentation_and_Manuals/Losmandy%20PEC%20Primer.pdf you state

I just saw a new eero wifi extender ( https://www.eero.com/shop/eero-max-7 ) that’s rated for outdoor use and is supposed to have a very generous coverage. Maybe this is what you’re looking for?

Greg, you can unsubscribe yourself from Groups.io directly: /g/Gemini-II/editsub. Scroll down to the end of that page to see the "Leave Group" button. Regards, -Paul