开云体育

Paul Sorry the 4th image didn't attach.? I'm having a hard time trying to attach images using my phone.? I'll try again tonight using my desktop computer. Brief description of mount/balance screen

Hi Ron, I think you're missing one of the balance screens. I was hoping to compare the PWM % with and without an RA button press, but can't do that without the other screen. Firmware looks good -- all

> > To Paul Kanevesky, > First image: info screen after resetting defaults > Second image: menu screen, going to Mount/Balance > Third image: Mount/Balance screen > Fourth image: Mount/Balance screen

Enable Allow Speeding Up under Menu->HC->Buttons: https://gemini-2.com/hc/En-hcbuttons.html You can do something similar with graphical buttons on the HC, just turn on Persistent Diamonds. You'll can

I'm a long time Gemini 1 user and I remember using the double button press on the Gemini 2 color HC for visual before I fell in with a bad crowd and started imaging with ASIAIR long before the L6 Beta

I updated all FW successfully. Thanks to all for the guidance! Art

Thank you! I successfully updated the G2, HC, (using the GFU) and servo firmware (using pic kit 3)

Oh man. I can't believe I did not catch that. That is the issue. NINA is calling for a Flip too early. I know what to do now. Either increase the Minutes after Meridian in NINA to 12 or more minutes,

If you do a Cold Start, you will need to rebuild your model, but it's a good idea if things appear wonky, safety limits or objects that should be reachable becoming unreachable. etc. If you have

I just re-read the instructions on setting the safety limits. This reminded me that the safety limits are referenced to? the CWD startup position. With my slide off roof observatory I can't close the

Gary, that error on a meridian flip tells you that you are trying to reach the target that is not accessible from the other side of the mount without violating safety limits. Either adjust your safety

Well, Meridian flip did not work. All went well up to that point. Again the NINA Flip dialog opened, said it was doing the flip, but it did not occur. Then errors started again. I get a lot of this

You mentioned being connected by an ethernet cable to a PC; remove it and test just the Gemini and HC.? Once that works properly, see what happens when you connect to your PC. I say this because when

Well interesting. Today all I did was go turn on the Gemini, and went to the Network screen on the hand controller. I noticed the IP address had changed to a new value. So I looked on my EERO home

Yes.? These are the current production code files.? You can also use the GFU program to automatically update your Gemini 2.? Either way you will need a PIC Kit programer to program the PIC chips

Sorry David, that was a Typo of the mind, I meant to type PIC (Peripheral Interface Controller).

Hi Gary, It will show up on your home network once it connects corretly, but you need to make sure Gemini is configured to join the network. You can either assign Gemini a static IP address or make it

Quick question. After connecting the Ethernet cable, will the Gemini II on my mount show up on my home network as a connected device ? Because at the moment it does not. My home network is as follows.

There’s nothing in the motor driver firmware that’s specific to PEC – that’s all handled by Rene’s code in the ARM processor. David Sent: 07 October 2024 14:38 To: [email protected]

L6.02 mainboard firmware includes these