开云体育

Pete, you had two things going on at the same time. One a warning beep about approaching the safety limit, the second an error condition -- a stall. Both produce beeps, the stall will be random, based

On Mon, Jul 10, 2023 at 02:12 PM, Brian Valente wrote: > > >>>Was the beeping the limit beeps being distorted by the RA Stall!? > > Not sure what you mean by erratic/random/distorted > > As you

Not sure what you mean by erratic/random/distorted As you approach the limit, it will beep slowly and then more rapidly until it hits the limit -- Brian Brian Valente astronomy portfolio

Okay, but why were the beeps so erratic and random, sounded like it was an issue all on its own. It was right before it reached its limit and there was no normal beeping from the limit being reached.

In try, in short: The mount tracks, that means the ARM controller sends pulses for motor steps. The servo pics try to follow with small or no lag, David programmed the control loop with P, I and D

Okay thanks, Yesterday I got some strange erratic beeping right before the mount reached its limit. At the same time, I was getting "RA Stall!" on the display. The spring-loaded worm was too tight.

Yes, Pete. All internal calculations are done in UTC anyway, the local time was introduced by the Meade(R) command set. The HC shows the Julian Date and the Sidereal time (MENU->SYSTEM->TIME). This is

Oh, I see, so it seems to be working correctly then. Let me ask again, is it okay for me to use UT with offest set to 0 even though I am at Easter Standard time? Will all Gemini features work with

Pete, Once started up the color is not changed automatically thereafter. It is a startup-only feature. If the Sun is up in the sky at your location, the HC it should start up in green daylight mode.

Then I'd suggest you continue to ask for help here, but please don't complain if you're not getting an immediate answer -- it is not a requirement for anyone here to answer your questions. It's

On Sun, Jul 9, 2023 at 06:17 AM, Rene Goerlich wrote: > > Peter, > > The HC has an "Adaptive Color" option that you find under > MENU->HC->Display. If this is checked it overrides the color settings

I would rather not, I needed help 2 days after I got my mount and dealing with Losmandy on the phone and in person at NEAF made me regret the $5700 I had just spent.

Pete, this forum is for Gemini-2 users and is owned and run by other Gemini-2 users. This is not an official Losmandy support forum. While Brian participates here and tries to help, he’s just

Thanks for your reply, I am relieved that other Losmandy owners are out there willing to answer my questions when they seem to be ignored.

It’s a knock off clone not the real thing. ?But I have a fleabay knockoff PicKit 3 that does everything it should. ? I’ve don’t quite a few dipic33s with it. In many regards many liked the

I ask because it's like 1/10th of the price. https://www.ebay.com.au/itm/264493802160?chn=ps&_ul=AU&mkevt=1&mkcid=28 Even the most expensive versions I can source locally are only about 60% of what

The stall detection in L6 is more sensitive than L5. D. Sent: 09 July 2023 18:58 To: [email protected] Subject: Re: [Gemini-II_io] Erratic Beeping Apparently, the Spring was too tight. I had seen

Thanks Brian! I'll try the 4x-mode under sky conditions the next days. Bernd

We have a test version of HC firmware to address connection problems and HC brightness. Please PM me if you wish to test it Thanks Brian

We have a test version of HC firmware to address connection problems and HC brightness. Please PM me if you wish to test it. Thanks Brian