开云体育

Trevor, I think it is time to strip down the mount and regrets it. Paul

Thank you all for your help, I am using gemini 2 which has not been updated for a few years, it is not beta. The asiair app is also not beta and it is using the update issued approx 3 months ago

Hi Barry, A few questions to help me keep track of this stuff. What version Gemini are you using, all Gemini 1, Gemini 2 original tallboy or Gemini 2 mini? What version Gemini 1/2 firmware does the

One big advantage of raspberry pi are that full VNC licence is included, so remote access is really easy. I found this out recently when trying to set up a linux pc for remote use with kstars/ikos etc

Sorry Jim has it correct. It's changing the move speed

Barry, To fix the speed issue on the PA, change the Move speed on the Hand Controller to 500 or more.? Once you get it PA'd, the goto should work fine, but if it doesn't let us know what message you

Excellent, thank you

Gemini-2 is set to Guide or Move during the PA process. Check the slew speed on the HC and make sure its set correctly. Sorry; I don't recall what the actual fix was. the issue was that PA process

Last couple weeks erratic tracking in DEC with a periodic spike using PHD2 guiding very annoying any ideas what may be causing it, mount is over 10 years old and never been serviced but has generally

Thank you for this input and I will certainly check the next clear night, however one extra point is everything works fine using the hand controller, it just breaks down using the asiair

I recall seeing something about this issue.? From what I recall the Gemini-2 is set to Guide or Move during the PA process.? Check the slew speed on the HC and make sure its set correctly.? Sorry;

Yes it looks good and the MeLe will give it a power boost. It is a pity RPI 5/6/7/8 didn't happen as they were a great performant little unit albeit some time back. I haven't looked too closely but

A recent update of my asiair pro left me with a lot of problems, I have resolved most of them but cannot get it to work with my gemini as it used to. Problems are on doing PA, when it rotates the

FYI it looks like there will be a new stellarmate coming soon. It looks like it is based on the MeLE x86 PC. I saw the post on facebook: https://www.facebook.com/stellarmate. I recently switched from

Hi Michael, Thanks for posting your result! Tracking comet using the new Small Objects feature is a bit tricky because it changes tracking rates based on the predicted motion of the comet, not the

Hello again,I forgot to send you the ephemeris file from gemini.net corresponding to the taking of the photo!Cordially

Hello Paul, Brian, Attached here is an image of the comet taken with the tracking function of gemini telescope.net version 1.1.17 .It worked, there is a star trail but the comet nucleus seems slightly

Hello All, Scott and I made the decision to close the Beta Group. ?Within minutes we had 35 people and then the number just kept growing and growing along with the technical support and questions.

I think it might be backlash, Lloyd. Both axes are definitely tracking when following the comet, so you'll want to take up all the backlash out before shooting.

Lloyd Dec is not reversing, so backlash should not be an issue ongoing If you think it's an initial backlash uptake, during your step of positioning the comet on your chip (presumably to you want more