开云体育

The GFU app pulls the latest available firmware versions from the web by accessing gemini-2.com website. If your internet is disconnected or very slow, it's possible that the firmware versions listed

Hi all, I did something "funky" and got my GFU download from the Gemini webpage, as opposed to the link in Paul's initial msg in this thread. I did not check the version before pressing "start" (I

I am not an expert, so take this with a massive grain of salt...looking at the graph you have very high aggression settings, but the mount is apparently not responding to corrections as the numbers

Hi Paul, I finally had time to set things up so that I had both the Gemini and my Eagle 4 Pro connected via Ethernet into my router. Updated everything using GFU; worked like a charm. Thanks! John

I recently added an RA extension and 12" pier extension to my g11 mount.? I wanted to improve functionality around the meridian and these upgrades did exactly that by reducing the time I need to wait

I have the ZWO 174 MM mini in their OAG-L with AA+ and it works well. “Unity” gain is 68 and if you choose medium gain in the AA+, I think that is where it sets it. I just leave it at 68 for 90%

John & Chip, Thanks for both of your help.? The ethernet connection is up and running, and I really like the responsiveness of Gemini with this connection. Also the convenience of a virtual hand

Hello everyone, I'm transitioning from primarily visual observing with the Gemini-II system to astrophotography and would appreciate some advice. My current imaging setup is as follows: - *Takahashi

I did that in anger while trying everything, everywhere all at once.

You might also want to update to the latest Gemini 2 and Hand Controller firmware, L6.1 and v1.63.? I don't know if it would directly impact this particular issue but they did a few nice things and

Thanks Paul!

Windows 7

One more question: What is the lowest level of Windows that can be used to do the updates? TIA.

Thanks!

I pulled the recent changes from Git and built it on a test environment.? I am willing to say that it appears to set the longitude correctly (if a little different from how I'm used to seeing it):

One last suggestion for GFU, be sure you have all options checked EXCEPT Videos and Show Beta versions.? This ensures your menus and web UI screens have all of the right layouts to match the new

Thanks for all of the replies and help. We will try updating to the latest firmware to see if that will help.

Will Do (this weekend hehe)! Paul

Supposedly this was fixed in the Dec. 1 release on GIT.? Have you tried it yet? -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

Use the GFU to get the latest updated Gemini 2 L6.1 firmware and HC v1.63 firmware.? Do be sure to let the HC load the new HC firmware then do an HGM reset and power down wait 10 seconds then power