On Mon, Jul 10, 2023 at 07:28 AM, @VictoryPete wrote:

I would rather not, I needed help 2 days after I got my mount and dealing with Losmandy on the phone and in person at NEAF made me regret the $5700 I had just spent.

Then I'd suggest you continue to ask for help here, but please don't complain if you're not getting an immediate answer -- it is not a requirement for anyone here to answer your questions. It's impolite, and specifically against the group policy. I and others have been more than willing to help you, spending time over the weekend to answer your questions. Again, if you have complaints, regrets, or need an immediate answer -- contact Losmandy. This group is not for official support, and it says so right on the home page:

This users group is here to help you, we want your questions and answers. Now if you have constructive criticism or suggested improvements of the Gemini-2, then please post it. This users group only works if we all do our part. But please no bashing, just for bashing sake. Remember, the Gemini-2 is still under development. Most of us have invested our hard earned money, and and more importantly, many hours, and are proud of our investment. This users group is not run by Losmandy, but by Gemini-2 owners just like you. Lets make it the best!

On Sun, Jul 9, 2023 at 06:17 AM, Rene Goerlich wrote:

Peter,

The HC has an "Adaptive Color" option that you find under MENU->HC->Display. If this is checked it overrides the color settings for Daytime/Dawn/Nighttime Mode by selecting the mode that is appropriate, based on your location, date and time. As long as these values are not set correctly it may look strange, but once all is set, it is nice. If you don't like it just uncheck the checkbox.

In L6 there is an additional precaution. If you wake up after a night of observing, having used Nighttime Mode and having dimmed the display it is brightened up that you can read the display although the Sun is in the sky now. If you can't read it anyway, you can use Gemini.net to adapt the screen brightness.

搁别苍é

Am 09.07.23 um 11:48 schrieb peter@...:

After the update my screen was green. This morning on power up it is now blue. Why is this?

Hi Rene
? ?I am not sure this is working correctly; my display was green all last night. I just powered cycled and the screen is now blue. I am at Eastern Standard Time.

Thanks for your help

Pete

I would rather not, I needed help 2 days after I got my mount and dealing with Losmandy on the phone and in person at NEAF made me regret the $5700 I had just spent.

On Mon, Jul 10, 2023 at 06:47 AM, @VictoryPete wrote:

Thanks for your reply, I am relieved that other Losmandy owners are out there willing to answer my questions when they seem to be ignored.

Pete, this forum is for Gemini-2 users and is owned and run by other Gemini-2 users. This is not an official Losmandy support forum. While Brian participates here and tries to help, he’s just another forum user. Everyone else here is just like you — owners and owner want to be.

If you require official Losmandy support, please open a ticket with Losmandy directly at their support email.

Regards,

? ?-Paul

On Mon, Jul 10, 2023 at 04:06 AM, David C. Partridge wrote:

The stall detection in L6 is more sensitive than L5.??

?

D.

?

From: [email protected] <[email protected]> On Behalf Of peter@...
Sent: 09 July 2023 18:58
To: [email protected]
Subject: Re: [Gemini-II_io] Erratic Beeping

?

Apparently, the Spring was too tight. I had seen that "RA Stall!" before with Level 5 but the mount would still function. Is there something in Level 6 that acts as a safeguard when the spring is too tight?

?

Thanks for your reply, I am relieved that other Losmandy owners are out there willing to answer my questions when they seem to be ignored.

It’s a knock off clone not the real thing. ?But I have a fleabay knockoff PicKit 3 that does everything it should. ? I’ve don’t quite a few dipic33s with it.?

In many regards many liked the PicKit 2 better. ?

But fleabay clones are a mixed Lolly bag. ? Some are sweet some sour. ? Look for feedback and how many purchased as an indication. ?You Also need a 2.54mm to 2mm pitch male end cable.?
--
Brendan

I ask because it's like 1/10th of the price.

Even the most expensive versions I can source locally are only about 60% of what Losmandy are asking.
Am I crazy, or are the Losmandy prices kinda $$$?

开云体育

Thanks Brian! I'll try the 4x-mode under sky conditions the next days.

Bernd

We have a test version of HC firmware to address connection problems and HC brightness. Please PM me if you wish to test it

Thanks


Brian

We have a test version of HC firmware to address connection problems and HC brightness. Please PM me if you wish to test it.?

Thanks


Brian

--
Brian

--
Brian

Is there any need to keep it for the future?

Yes, I was near the limits, but the spring was too tight, and has been for a while because I have seen the "RA Stall!" before I upgraded to L6. No light or heat. Apparently when there is an "RA Stall!", you cannot move that axis, as I could move the Dec axis. It seems the other buttons may be inactive also as to get your attention. I imagine this is new to L6, because like I said, when I had "RA Stall!" in L5 I could still move the RA axis. I was asking about the erratic beeping, it is very obvious as it sounds like something failing, but it seems to be the warning that limit is about to be reached. can you confirm my assumptions?

Well, this is all very helpful - and clarifying. The interplay btw software, mounts, OTAs and photography equipment is complex, especially for those of us who are relatively new to this hobby - and who might image once or twice a month. ?Plenty of room to get confused. ?

I don’t use an OAG, and generally wouldn’t think of a mid session addition of a reducer. ?I was trying to understand the relationship btw NINA and the Gemini driver. I will adjust them both to match equipment in my setup moving forward. ?Easy enough to do.

thanks, all.

Geoff

My PICKIT turns out to be a 2, not a 3.?? I have no trouble using it with MPLAB X to program PICs.? Is it going to be sufficient for the upgrade?

Apparently, the Spring was too tight. I had seen that "RA Stall!" before with Level 5 but the mount would still function. Is there something in Level 6 that acts as a safeguard when the spring is too tight?

The spring loaded worm must be too tight. I am going to adjust it.

--
Brian