开云体育

Chris, that's a perspective I hadn't thought of, but may be able to make use of. The angle I was approaching this from was... well, when I started in astronomy, I star hopped to objects (who does that

Been with it for all that time plus but older age and no personal observatory possible on my hillside property means a strainwave mount is in my future.

Fascinating write-up.? A lot of the technical details are way above my understanding but fascinating nonetheless to read how Gemini developed. I have been a Gemini user since late 2005 when I

Any PICKit 3 from (e.g. eBay) should work fine The level 6 code will work with the old servo code, you just won’t have the x4 precision mode, and a number of other fixes and enhancements. Davod

Good to know I’m not going mad – over to you René Sent: 11 March 2025 22:39 To: [email protected] Subject: Re: [Gemini-II_io] Gemini 2 Hits Western Limit Early I've also discovered that when it

So I figured it out. Apparently, it helps when you don't fat finger a comma in the IP address. I was able to successfully upgrade and flash the firmware. However, I have Level 6 in my Gemini, and the

Thank you Paul. I'm going to skip right to the PemPro method.

Thanks! I downloaded it and will work on it this week.

I've also discovered that when it hits the limit I am unable to back out of the limit. The only way I found to do it is to tell the Gemini to go to CWD position. Then I push the stop button when it

You could do this offline of gemini-ii though I think? If you have the mount at CWD, you can rotate the setting circles on the mount so that the RA axis is at 12 hours and the declination is at 90deg.

I thought that might be the answer, but wasn't sure. Thanks for answering. Ken

That won’t work as when you use “push to” you are slipping the clutches which just means the controller (G-1 or G-2) has no idea where the mount is pointing. Sent: 11 March 2025 18:51 To:

Quick question for those of you who probably do visual (or know more about how the mount works than I do). I'm surrounded by trees at my current location and have holes? with no leaves to image thru.

Thank you Rene for writing that up. Very interesting since I had not been with Gemini through its whole journey. Happy Birthday! -- Edward

Happy Birthday Gemini Best and most accurate goto system I have ever used. [email protected]> wrote:

Hi Jason, GFU is trying to get the current firmware version from Gemini. The error appears to be caused by that call. Can you try navigating to http://192.168.8.220/en/firmware.cgi In your browser and

Hey everyone, So I have firmware version 5.21 and version 1.20 in the hand controller. I am attempting to use GFU version 1.0.0.32 to get it to the latest version of Gemini 2. When I click the start

Art, PemPro is pretty inexpensive. It has a slight learning curve but works well; keep notes on using it. Losmandy has some documentation for using PemPro too which is worth acquiring. I would not be

Hi Art, Gemini PEC can be programmed by having an autoguider issue guide commands to keep a star centered, while selecting Start PEC Training from Gemini HC menu (Menu->Mount->PEC-Start PEC Training):

Hello all, I would like to get my guiding <1” and have recently upgraded my fw to L6. Is it still necessary to use PemPro to pec train my G11? Or is there a way to now do this with L6? Thanks! Art