开云体育

Is there a source for replacement touch screens for the G2 HC? 3 year old GM811G screen has been damaged by sun UV exposure over time, such that it is difficult to read. Thanks! Dale

paul, I don’t know about the original poster, but i can attest to my experience. Every time i hit a safety limit i am unable to move it without going cwd first. which makes setting new limits

Hi masami, glad you were able to find a work-around. I suspect some firewall setting on that particular network int

Ken, be careful when using automation software -- it's entirely possible that a command was sent to Gemini put in a park state while waiting for the meridian crossing to do a flip. Gemini has multiple

Hi David, I've not had that happen to me. Were you trying to use the touch-screen or the physical buttons? Did you try the ASCOM driver virtual HC buttons? Does it happen every time you hit a safety

I have had that (albeit rarely) and usually when it was approaching a meridian flip - odd because it handles flips 99.9% of the time. I usually tell it to park at CWD and then goto the target again -

I was resetting the worm mesh on my G11 (I'd been getting RA stalls) and during testing I hit the RA safety limit. My problem is that I couldn't use the arrow keys on the HC to move the mount after

Just a quick follow-up.? I fired up Gemini last night and the date on the HC was accurate.

Paul, I'm sure I've found the solution to solve this issue, though I don't know exactly the mechanism of the problem. My Gemini-2 for CG-11 (SLW&OPW) was directly connected to my NUC #2 without

Paul, Following your reply, I've changed my PC, which is connected to CG-11's Gemini-2, to other PCs.? I've got very interesting results. #1 Gemini-2 === Intel NUC #2: has slow response problems #2

I may have done those resets as well since they are in the afternoon right before I grab the log.

Hi masami, The error in the ASCOM log shows that the driver can't connect to Gemini using FTP protocol (this is used to retrieve the list of PEC files stored on the SD card): 10:48:30.983 Exception?

Hi, I have two Gemini-2 units.? One for my CG-11 (OPW+SLW upgraded) and G-11 (OPW only). For CG-11's Gemini-2, I've noticed that the response time when I select "Configure PEC" on virtual HC is very

Hi Paul, Next time I will use Gemini Troubleshooting Reporter.? According to the forecast, the weather here will not be cooperative in a few weeks or so. By the way, I don't know this issue is

Did you also do a few reboots/resets on Feb 28? It looks like there were two WD Resets on that date, also.

Hi Paul, I will follow your suggestion. I have cloudy nights for the next week, I can try in the future. Looking at those timestamp of events, they may be I was doing the reset. I used the web UI to

Hi masami, Like I asked Seokman, can you please go to the Gemini.NET virtual hand controller, connect to Gemini and collect a troubleshooter log zip file and upload it here? Seokman appears to have a

Hi Seokman, Thanks for uploading this! Looking into Gemini status log, it appears you've been experiencing very frequent restarts after a watchdog reset events (WD Reset). Here are some of the latest:

I do see the same pattern on my ASCOM log file. 01:57:21.910 UDP connection ? ? ? ? ? ?TID:11 [2]: gemini, 11110 01:57:21.910 Looking up DHCP name ? ? ?TID:11 [2]: gemini 01:57:23.762

Hi Paul, Thank you for your guick feedback. Yes, after I found my Gemini-2 was disconnected, I tried to connect to it from the virtual HC several times.? But no avail. At that time, as I wrote