开云体育

Hi Don Thanks for posting about this Regarding your guidelog, it would be ideal if you can do a baseling guidelog and submit that by following these steps:

By way of background, PEC is mainly to improve your tracking when you are /not/ guiding.? For instance, with my Celestron mounts, training the PEC enabled me to take 2-minute exposures with a 400 mm

A while back, I purchased an older G11 (~2006?) and I have since upgraded it to the Gemini 2 and have started to work with it. ?Initially, the guiding was horrible so I tore it down to clean,

Hi Craig being considered and does this firmware allow for such a development? Firmware already supports Alt Az, you can switch to it in the Mount->Design option. It's been there since Level 5

Hi everyone The Level 6 open customer beta is now open Level 6 is the new Gemini 2 firmware. For customers wishing to test this latest version, it is available for installation. Keep in mind this is

I saw a podcast about a potential Alt-Az adaptor for Losmandy mounts. This would require a modification to the firmware. Is such an adapter being considered and does this firmware allow for such a

Hi LKO there is only one set of limits, so short answer is you'll have to change them manually. It's possible to record them and just type in the new values (rather than retrain your mount) or you

I was recently given a Celestron Omni 102 XLT refractor OTA, which I plan on mounting on my G11G. I've already set up the mount with limits for my two SCT's, but this long refractor is definitely

Hi everyone We are opening up the beta a little later today We had a last minute change in the process for powering the board to update the servo, and we need to test and make sure it's documented

Brian Not yet Chuck

The battery genie strikes again…. Here’s the background. I’ve got a G11T, love the mount. I’m running a tandem setup, an LX200 ACF 10” with an ED 127. Early December I replaced the 15”

that's a great result - you did that with basically a guidescope? smh wow that's fantastic

I took a stab with my over powered Sky-Watcher Evoguide 50 ED. No guiding, just siderial tracking. I took 60s exposures. About 100 of them. WBPP, then stripped the stars and ran comet alignment. I

Thanks Chuck. it's hard to say, sometimes two situations sound similar but the devil is in the details You never used L6, correct? [email protected]> wrote:

Very nice Comet shot Brian. Your results are evolving for the better! Ross PS I'm following all the level 6 update stuff. Somewhere, I have the proper cable for the pix programmer. Tom sent me one

Jim w and Brian. My 2yr old g11g Dec motor quit moving and failed and had to be replaced. I'm wondering if your problem was just a bad motor. Chuck

see if it makes sense to change the driver to report "not slewing" when tracking using JPL/Horizons. My only concern there was that the "tracking" could be at 1000x the Sidereal speed when chasing

Hi Brian, yes, that's possible. You can turn that off in PHD, but I'll see if it makes sense to change the driver to report "not slewing" when tracking using JPL/Horizons. My only concern there was

Jim we'll need to look into this more. afaik nothing has changed here between 5 and 6 but we can't have motors overheating -- Brian Brian Valente astro portfolio https://www.brianvalentephoto

Hi folks, Another ZTF from sunday https://www.astrobin.com/oxut9p/ It's interesting to see how the comet is evolving. A few interesting notes: - i switched to a tak Sky90 w/ reducer for 407mm focal