开云体育

Hi Andy,

I too would like a PA board as well if you have enough.

Thanks, Tim Mi0TME

Hi Ian

Your MK3 PA PCB has been reserved from stock and I will email you soon to confirm cost along with the MK2 Exciter PCB.

Regards

Andy

Hi Tim

Your MK3 PA board has been reserved from my stock and I will email you soon to confirm cost along with the MK2 BPF

Regards

Andy de G6LBQ

Hi Andy

I'd also like to have 1 MK3 PA board reserved for me.

Please join it to the boards of the exciter and BPF that I have already registered on the databases.

Regards

Paulo

PU1PBE

Hi Andy

I'd also like to have 1 MK3 PA board reserved for me.

73's

Hi Paulo

I have reserved 1 of the MK3 PA boards from my stock and will email soon to confirm cost along with the other boards as per the databases entries.

Regards

Andy de G6LBQ

Hi Kon

I have reserved 1 of the MK3 PA boards from my stock and will email soon to confirm cost along with the other boards as per the databases entries.

Regards

Andy de G6LBQ

Hi Andy

Where I can find the documentation for the MK3 PA?

I've found only for the MK2.

Regards,

Paulo

PU1PBE

Hi Paulo

Information on the MK3 HF Linear Amp can be found in the files section in my G6LBQ Irwell Transceiver ?folder.

Regards

Andy de G6LBQ

Hi Andy,

I could observe that the schematic of the PA MK3 is not totally compatible with the pictures of the board with the components in place.

For example, on the board there are capacitors with 10nF and 100nF values, although in the schematic there are only 100nF capacitors.

Another thing, although you inform that all smd components are 1206 size, there are 100nF capacitors with different sizes.

I think that a list of the material with details of size, value, type and voltage would help a lot.

Regards,

Paulo

PU1PBE

Andy,

Sorry, correcting my previous post.?

There is only one 10nF capacitor on the schematic, but two on the board.

Regards,

Paulo

PU1PBE

Hi Paulo

Thanks for pointing that out I will amend the schematic soon.

Regards

Andy de G6LBQ