|
is there any ircddb and on for the icom G3 ? i looked around and have not seen anything
thanks Mike ke3jp
|
? ? Hey Mike, saw your post on the dstar admins group too.
This group is for the ircDDBGateway project that works with Icom D-STAR gateway packages. The ircDDB routing addon is a completely different product.
Attached is a document you can use to add on the ircDDB addon for K3WRB and?
Do you have your old “key” and/or copy of the “properties” file?
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin
toggle quoted message
Show quoted text
On Feb 23, 2021, at 11:23 AM, ke3jp <ke3jp@...> wrote:
?is there any ircddb and on for the icom G3 ? i looked around and have not seen anything
thanks Mike ke3jp
|
Sorry, forgot to attach the document.
Terry
Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin
toggle quoted message
Show quoted text
On Feb 23, 2021, at 1:13 PM, Terry M. Stader <ka8scp@...> wrote:
? ? ? Hey Mike, saw your post on the dstar admins group too.
This group is for the ircDDBGateway project that works with Icom D-STAR gateway packages. The ircDDB routing addon is a completely different product.
Attached is a document you can use to add on the ircDDB addon for K3WRB and?
Do you have your old “key” and/or copy of the “properties” file?
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin On Feb 23, 2021, at 11:23 AM, ke3jp <ke3jp@...> wrote:
?is there any ircddb and on for the icom G3 ? i looked around and have not seen anything
thanks Mike ke3jp
|
Terry thanks for the info i did what you said and it stil in not working and ideas ?
|
I have no experience with this version, but you may want to take a look: ? ? ???? Jim – K6JM ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of ke3jp Sent: Tuesday, February 23, 2021 4:50 PM To: [email protected]Subject: Re: [G3-ircDDBGateway] ircddb add on G3 ? Terry thanks for the info i did what you said and it stil in not working and ideas ?
|
|
This email has been checked for viruses by Avast antivirus software.
|
|
Hello Terry,?
I have follow the ircddb_addon_for_G3.txt.?
is the ircddb.cpprop-g3.pt a script file?
Should I run it?
Best regards,?
Jose Alves
CT1FHW
|
The Perl script file was a utility tool to import the dstarmon.properties file in to the equivalent format for the ircddb addon. If you have the previous version of ircDDB.properties from your G2 system, you would not need to run this perl script.
make sense?
|
Yes, it makes!!
Thanks a lot!!!
Best regards ?Jose Alves CT1FHW
A quinta, 17/02/2022, 21:09, Terry M. Stader < ka8scp@...> escreveu:
The Perl script file was a utility tool to import the dstarmon.properties file in to the equivalent format for the ircddb addon. If you have the previous version of ircDDB.properties from your G2 system, you would not need to run this perl script.
make sense?
|
I was tryning?to run the script? but I got some errors.
I have download?the file then?I have done ? ? chmod 755 ? ? ? ?./?
And I got a lot?of errors, one of them is complaining about the location of Pearl. Do I need to install any additional software in order to run the script?
Best regards
Jose Alves CT1FHW
Terry M. Stader < ka8scp@...> escreveu no dia quinta, 17/02/2022 à(s) 21:09:
The Perl script file was a utility tool to import the dstarmon.properties file in to the equivalent format for the ircddb addon. If you have the previous version of ircDDB.properties from your G2 system, you would not need to run this perl script.
make sense?
|
It is possible that Perl was not installed in the location the perl script is expecting it. You can look at the Perl script itself and see if it is the same location as installed on yours.
What is the call sign of the system you are running the ircddb addon on?
Is your installation of the G3 version of ircddb not working? Are you getting an error from either of the services that tells you it cannot read the ircDDB.properties?
Remember, you can check the status of the two components….
systemctl status ircddbd3 systemctl status ircddbmhd3
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin
toggle quoted message
Show quoted text
On Feb 17, 2022, at 5:16 PM, Jose Alves - CT1FHW <ct1fhw@...> wrote:
? I was tryning?to run the script? but I got some errors.
I have download?the file then?I have done ? ? chmod 755 ? ? ? ?./?
And I got a lot?of errors, one of them is complaining about the location of Pearl. Do I need to install any additional software in order to run the script?
Best regards
Jose Alves CT1FHW
Terry M. Stader < ka8scp@...> escreveu no dia quinta, 17/02/2022 à(s) 21:09: The Perl script file was a utility tool to import the dstarmon.properties file in to the equivalent format for the ircddb addon. If you have the previous version of ircDDB.properties from your G2 system, you would not need to run this perl script.
make sense?
|
Hello Terry,
The G3 repeater call sign is CQ0DLX. At the Ircddb web page, I only have the server with green light, the repeater is red. So I'm assuming that I need to finish the Ircddb addon configuration.? This is a new repeater G3? build from scratch, with database recover, because we can't locate the old server. I have follow the procedure mention on the text file, and didn't run the script. I will try to install the pearl on the server and try to run it again.
Jose Alves CT1FHW A sexta, 18/02/2022, 01:11, Terry M. Stader < ka8scp@...> escreveu:
It is possible that Perl was not installed in the location the perl script is expecting it. You can look at the Perl script itself and see if it is the same location as installed on yours.
What is the call sign of the system you are running the ircddb addon on?
Is your installation of the G3 version of ircddb not working? Are you getting an error from either of the services that tells you it cannot read the ircDDB.properties?
Remember, you can check the status of the two components….
systemctl status ircddbd3 systemctl status ircddbmhd3
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin On Feb 17, 2022, at 5:16 PM, Jose Alves - CT1FHW <ct1fhw@...> wrote:
? I was tryning?to run the script? but I got some errors.
I have download?the file then?I have done ? ? chmod 755 ? ? ? ?./?
And I got a lot?of errors, one of them is complaining about the location of Pearl. Do I need to install any additional software in order to run the script?
Best regards
Jose Alves CT1FHW
Terry M. Stader < ka8scp@...> escreveu no dia quinta, 17/02/2022 à(s) 21:09: The Perl script file was a utility tool to import the dstarmon.properties file in to the equivalent format for the ircddb addon. If you have the previous version of ircDDB.properties from your G2 system, you would not need to run this perl script.
make sense?
|
This is the output I got :  
|
Hello everyone,?
With some local help , I could run the script!!!
I though I should execute it as command, but in fact I learn that I need to invoke the application with the script !!!
---->? perl?ircddb-cpprop-g3.pl?
Many thanks too all!!
Jose Alves
CT1FHW
|
Somemting is not rigth at the IRCddb page, ?  As you can see the CQ0DLX B is identified as MMDVM, the CQ0DLX A? as no id.  The heartbeat is red, and the system info is OK!!  There is any admin page to login at ircddb?
|
Jose,
I have seen this heartbeat behavior on a couple of our G3 systems as well. Once I restarted the ircddbd3 and ircddbmhd3 processes over again, it cleared. It is possible that the service “goes to sleep” once in awhile. Hans-DL5DI had mentioned it quite awhile ago.
This particular groups.io group was created to support the “blending” of the Icom G2/G3 D-STAR gateway software with the ircDDBGateway software and not for supporting the ircDDD network Icom addon package. More on that project can be seen at?
You may have to reach out to Hans-DL5DI himself. The addon product has moved off his focus and is not actively supported.
toggle quoted message
Show quoted text
On Feb 26, 2022, at 8:40 AM, Jose Alves - CT1FHW <ct1fhw@...> wrote:
? [Edited Message Follows]
Somemting is not rigth at the IRCddb page, ?  As you can see the CQ0DLX B is identified as MMDVM, the CQ0DLX A? as no id.  The heartbeat is red, and the system info is OK!!  There is any admin page to login at ircddb?
|
Hi Terry,?
Thanks for the info, I will try to reach DL5DI!!
Best regard
Jose Alves
CT1FHW
|
Hello everyone,?
Can someone provide me the TPC/UDP ports needed to be open at the firewall to allow the ircddb addon work!!
Best regards
Jose Alves
CT1FHW
|
I do not have any specific ports identified or firewalled on any of my systems and the ircddb addon works fine.?
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin
toggle quoted message
Show quoted text
On Apr 7, 2022, at 1:30 PM, Jose Alves - CT1FHW <ct1fhw@...> wrote:
?Hello everyone,?
Can someone provide me the TPC/UDP ports needed to be open at the firewall to allow the ircddb addon work!!
Best regards
Jose Alves
CT1FHW
|
Hello Terry,
Thank for the clarification.
Best regards Jose Alves CT1FHW A sexta, 8/04/2022, 15:37, Terry M. Stader < ka8scp@...> escreveu:
I do not have any specific ports identified or firewalled on any of my systems and the ircddb addon works fine.?
Terry Terry M Stader KA8SCP WB1GOF Repeaters/D-STAR Admin On Apr 7, 2022, at 1:30 PM, Jose Alves - CT1FHW <ct1fhw@...> wrote:
?Hello everyone,?
Can someone provide me the TPC/UDP ports needed to be open at the firewall to allow the ircddb addon work!!
Best regards
Jose Alves
CT1FHW
|
Terry M. Stader
Jose Alves - CT1FHW