开云体育

Won’t turn on but relay clicks

Eric S All Messages By This Member #53785 The relay clicks but the radio won’t power up. I checked the fuses and everything is okay. Anyone else have this issue? ?
[email protected] #53786 I've had this problem for 6 months and can't find? a solution. When I turn my Radio on it cycles on/off until I turn it off and reprogram it. If I use the clone/ download I can use my rt system to reprogram the radio and it works as normal all day. I just turn off the radio at night? and when I turn it on I just put in clone mode. ?? Brian ? ? N7BMH On Sunday, January 21, 2024 at 10:36:29 AM MST, Eric S <esh03603@...> wrote: The relay clicks but the radio won’t power up. I checked the fuses and everything is okay. Anyone else have this issue? ?
Dan KC2STA All Messages By This Member #53787 Have you checked the power supply voltage at the radio under load? Thanks Dan KC2STA toggle quoted message Show quoted text On Sun, Jan 21, 2024 at 12:36?PM Eric S <Esh03603@...> wrote: The relay clicks but the radio won’t power up. I checked the fuses and everything is okay. Anyone else have this issue? ? -- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX
Vic WA4THR All Messages By This Member #53791 I recall a similar problem when a friend asked me to sell his FT857 years ago, but he kept the mic with the number pad and installed the original mic. The radio would not turn on. I plugged in my number pad mic and reset the mic selection in the menu to get it going and it was fine after that. =Vic=
Easwaran Unni Tharakkal VU2TE All Messages By This Member #53794 Just remove the mic jack and restart. Like this problem I could overcome by this method. Unni VU2TE
Easwaran Unni Tharakkal VU2TE All Messages By This Member #53795 Remove the mic and re connect then switch on?the rig and try VU2TE On Mon, Jan 22, 2024 at 3:21?PM Easwaran Unni Tharakkal VU2TE via <unnitharakkal=[email protected]> wrote: toggle quoted message Show quoted text Just remove the mic jack and restart. Like this problem I could overcome by this method. Unni VU2TE
G4IJL All Messages By This Member #53796 开云体育 Unplug everything and then switch on. There is data going around some of those leads. This will eliminate the leads. Paul G. Chapman MInstLM G4IJL +
Eric S All Messages By This Member #53799 Everything is unplugged from the radio except the head (used both the long and original cables) with no positive result. The relay clicks and nothing until I hit the power button or plug in power again.? The power supply is powering my Yaesu FT DX10 without any issues.?
[email protected] #53800 My 857D turns on but then the relay clicks and it cycles on & off until I disconnect the power. Only way to keep it on is to clone then reprogram with rt systems then it will run with no problems. Brian On Monday, January 22, 2024 at 06:21:08 PM MST, Eric S <esh03603@...> wrote: Everything is unplugged from the radio except the head (used both the long and original cables) with no positive result. The relay clicks and nothing until I hit the power button or plug in power again.? The power supply is powering my Yaesu FT DX10 without any issues.?
Easwaran Unni Tharakkal VU2TE All Messages By This Member #53801 If you are using the Yaesu original power cable, check the connector, remove the connection and reconnect?it firmly. At times the connector also gave me problems. VU2TE toggle quoted message Show quoted text On Tue, Jan 23, 2024 at 6:51?AM Eric S <Esh03603@...> wrote: Everything is unplugged from the radio except the head (used both the long and original cables) with no positive result. The relay clicks and nothing until I hit the power button or plug in power again.? The power supply is powering my Yaesu FT DX10 without any issues.?

Previous Topic Next Topic