Keyboard Shortcuts
Likes
Search
Saw this once before....
Ronald E Smith
开云体育ESD. A ?static discharge will wipe out the EEPROM.? 24LC128 right beside the microprocessor. ?I have done it myself on the bench here on a Cold Feb Afternoon. ? It is winter. Dry.? Carpet in a vehicle etc. Snap. ? Just my guess.? The IC is ?very inexpensive, but you have to be able to take it off and put another back on. Reset the Radio and program back your settings. ? As for your issue, it could be as simple as that . Wouldn’t worry about it unless it starts happening every week.? ? And as far as Chirp goes. ?That is a long shot blaming it on that. ??? LOL.? I would need evidence. Never heard of that before.? ! ? Ronnie VE3NLS ? Innovative Circuits Electronics Repair Centre #2040 30/31 Side Road West Oro-Medonte, Ontario L0L 2L0 E-mail ? ? ? ??ron@... Mobile?? ??705-791-6634 ? ? ? ? ? |
开云体育Does that chip have to be flashed after replacement or is it just memory ??Or is it really just as simple as swapping out the chip and reprogramming..
-------- Original message --------
From: "Ronald E Smith via groups.io" <ron@...>
Date: 1/31/25 6:15 PM (GMT-06:00)
Subject: [FT-857] Saw this once before....
ESD. A ?static discharge will wipe out the EEPROM.? 24LC128 right beside the microprocessor. ?I have done it myself on the bench here on a Cold Feb Afternoon. ? It is winter. Dry.? Carpet in a vehicle etc. Snap. ? Just my guess.? The IC is ?very inexpensive, but you have to be able to take it off and put another back on. Reset the Radio and program back your settings. ? As for your issue, it could be as simple as that . Wouldn’t worry about it unless it starts happening every week.? ? And as far as Chirp goes. ?That is a long shot blaming it on that. ??? LOL.? I would need evidence. Never heard of that before.? ! ? Ronnie VE3NLS ? Innovative Circuits Electronics Repair Centre #2040 30/31 Side Road West Oro-Medonte, Ontario L0L 2L0 E-mail ? ? ? ??ron@... Mobile?? ??705-791-6634 ? ? ? ? ? |
Ronald E Smith
Sorry for the late reply.? I pulled a good one from a dead 857D.? Installed and it did a FACTORY RESET.? So I cannot claim to say for sure a blank one would be OK.
?
I would expect that the ROM in the CPU would dump a basic setup to the IC on a Factory Reset.? But that is a guess.
?
Ronnie
VE3NLS Innovative Circuits |