Keyboard Shortcuts
Likes
Search
FT 857 Question NJ9Q
switch mode to AM. Unless you use AM, leave power set to lowest setting. The radio remembers power setting per mode.
toggle quoted message
Show quoted text
Leonard K. Pennock (AD7AS) On 8/13/2018 8:00 AM, johnschwa@... [FT-857] wrote:
Is there a "Tune" function available?? What's the best way to transmit while?adjusting a manual antenna tuner. |
John Schwalbach
Thanks Leonard. I'll give it a try 73 NJ9Q
toggle quoted message
Show quoted text
On Wednesday, August 15, 2018, 7:34 AM, Leonard Pennock leonardpennock@... [FT-857] wrote:
|
Put me on the list for CW Low Power.?
The radio can handle a little reflection at full power so at its lowest setting that drives your tuner should be more than safe. I've had my '857 for seems lime 15 years and I've never had a problem with this. Congrats on the radio! If you have the funds, get yourself one of the SSB filters and watch the receiver come to life ;] Tracy N4LGH |
Is that on a straight FT-857? I checked mine. Menu 075 adjust power on all modes. Turning down on one mode, reduces power on other modes.
toggle quoted message
Show quoted text
Marius Swart -----Original Message-----
From: FT-857@... <FT-857@...> Sent: Wednesday, August 15, 2018 2:35 PM To: [email protected] Subject: Re: [FT-857] FT 857 Question NJ9Q switch mode to AM. Unless you use AM, leave power set to lowest setting. The radio remembers power setting per mode. Leonard K. Pennock (AD7AS) On 8/13/2018 8:00 AM, johnschwa@... [FT-857] wrote:
------------------------------------ Posted by: Leonard Pennock <LeonardPennock@...> ------------------------------------ ------------------------------------ Yahoo Groups Links |
John Schwalbach
toggle quoted message
Show quoted text
On Aug 15, 2018, at 3:31 PM, mariussw@... [FT-857] <FT-857@...> wrote:
|
Is there a low power "Tune" function. There is a workaround for that. My LDG YT-100 uses the AM mode as low power. Another low power function is on the DC in the power socket, ground the brown wire, then all modes will go low power. The DC cable option is useful for a battery lead, then using another lead for mains supply without the brown wire grounded for mains power supply lead. This achieves auto QRP for portable battery use. |