¿ªÔÆÌåÓý

  1. DaltonLathes
  2. Topics

Need picture!

 

I need a picture of the milling arbor used on the Dalton Combination
Machine. Mine did not come with one and I'm not sure what type it
takes, or how it looks. Thanks for any help, PK.
callin john
 

PK, You have a combo machine? I thought that I had the only one. I'll try to get a picture of the arbor tomorrow and send it too you. Where are you? Where did you get it? Is it up and running?? There are pix of mine on the site? John Callin

Joan Kelly wrote:

I need a picture of the milling arbor used on the Dalton Combination
Machine. Mine did not come with one and I'm not sure what type it
takes, or how it looks. Thanks for any help, PK.
Dennis Turk
 

¿ªÔÆÌåÓý

Hi PK? Turk here
?
If you go to Tony's site in England you will find some pictures I took of a combo machine that was here in Oregon a few years ago.
?
Tony's site is???
?
Fantastic we now have three of them.
?
Dennis Turk

----- Original Message -----
Sent: Saturday, December 01, 2007 4:48 PM
Subject: Re: [daltonlathes] Need picture!

PK, You have a combo machine? I thought that I had the only one. I'll try to get a picture of the arbor tomorrow and send it too you. Where are you? Where did you get it? Is it up and running?? There are pix of mine on the site? John Callin

Joan Kelly <nox2743@blackfoot.net> wrote:

I need a picture of the milling arbor used on the Dalton Combination
Machine. Mine did not come with one and I'm not sure what type it
takes, or how it looks. Thanks for any help, PK.
 

--- In daltonlathes@..., callin john <rumijohn@...> wrote:
Hi John, I looked at your combo pictures that are posted. Nice. You
have much more tooling than I do. I live up here in Noxon, Montana. I
found this machine at a local auction. An old machinest sold out and he
had two buildings full of great stuff. Everything went real low. I wish
I had seen your pictures before the auction as I see several pieces
that were sold seperately. The machine looks to be in good shape and
pretty tight. I plan to get it running this winter. I'll post some
pictures soon. PK
 

Pat
Nice picture of the combo machine. How close is it to running
condition. Keep us posted

Ron P
B-4 owner
Moodus Ct

--- In daltonlathes@..., "Joan Kelly" <nox2743@...> wrote:

--- In daltonlathes@..., callin john <rumijohn@> wrote:
Hi John, I looked at your combo pictures that are posted. Nice.
You
have much more tooling than I do. I live up here in Noxon, Montana.
I
found this machine at a local auction. An old machinest sold out and
he
had two buildings full of great stuff. Everything went real low. I
wish
I had seen your pictures before the auction as I see several pieces
that were sold seperately. The machine looks to be in good shape and
pretty tight. I plan to get it running this winter. I'll post some
pictures soon. PK
 

I need to build a motor mount but beyond that it looks good to go. I'm
still looking for an arbor for the horizontal mill and a operators
manual. PK
callin john
 

I'll get a picture of the arbor and send it this weekend. Sorry for the delay, been a bit under the weather.? John

Kelly wrote:

I need to build a motor mount but beyond that it looks good to go. I'm
still looking for an arbor for the horizontal mill and a operators
manual. PK
 

Thanks John, that would be great. Hope you're feeling better. PK

1 - 8 of 8