开云体育

Lot 4, no. 256. Two three jaw chucks, a lantern tool holder and what is likely a shop made tool holder (by the previous owner). I believe all the change gears are here, as well and a collet closer

Soon as it quits raining, i can try and send more photos of what you request or info i have gathered. Now its time for phy therapy and review of cortisone shots. Thanks for any reply. Low$John

Ok at my end John see picture .Terry

Lets see if this photo works.

Kinda figgering out how to use this site, try to post photo soon. I have a complete Dalton lathe under a tarp, I believe it was a Dalton 6, type 4.? Stored away some time ago.? will have to uncover

I saw it and I have a Lot 4 Dalton but no steady rest :(

Just checking to see if this mail gets to someone, i can send more info if wanted. I have photos? i can send if someone is interested. Just some old guy in southern Minnesota Low$John ****

Is there anyone that might have a Steady Rest that fits a Dalton B-4 Lot 4/30” Bed. I know they are not to be found but do pop up now and then. Since I do not know what it looks like for my Dalton

HI Dennis,?Since I really do not know what one looks like for the dalton ( Steady Rest ) I thought it might be two seperate pieces ( Guess not )--- Is it all one piece ?? Could you take a picture

Hi Terry As to steady rest the only one I have is on one of my display lathes and as such I don't want to get rid of it just yet. As to a base are you talking about legs and a chip tray or a cabinet

Dennis you did not happen to look through your goodies and see if you had a Steady Rest or maybe the Base to fit a B4 30" Lot 4 have you ?Terry?St.Petersburg Florida

Sorry Ryan I should have said Lot 5 not 4. The lot 2 3 4 and 5 all use the same spindle nose that being the 1 1/4 - 12. Dennis [email protected]> wrote:

Hy Ryan As to chucks the Lot 4 lathes came with a 4 inch three jaw and a 5 inch four jaw. As to 5 inch 3 jaw chucks the Bison is as good as they get. I have used them for over 30 years. The Polish

I think you can. Go for it! Dan -- Sent from my Android phone with GMX Mail. Please excuse my brevity.

I never tried to use this site be for, can i reply and maybe with a photo?? Low$John

Hi guys, The chuck on my Lot 5 seems to be on its last legs. Can anyone recommend a modern replacement that is affordable and able to be easily mounted to my spindle? Seems like the one I have has a

Sorry, Terry, it sold last weekend. Young guy, in Tillamook, Oregon. He is probably going to but the smaller Lot 6 also, in a couple of weeks. The smaller one is also a Lot 6, but the spindle thru

Dan do you still have the Dalton Lathe ?? If you do could I ask a favor as in some pictures of the steady rest I see on the lathe. I have a B4/30" Dalton and have been looking for Steady Rest but

Dan I would be very interested in the lathe "BUT" I live in St.Petersburg Florida not like I am right around the corner.Terry

Thanks Dan. Wish I had the room and the strength these days…. Alas we all grow older. Looks great. Good luck. -Bart. Owner of a Lot 4. Circa 1924.