开云体育

Hi at all, seen on Ebay-UK. Vintage Dalton New York Metal Working Lathe, Small Lathe, Hobby Makers Tools | eBay (

I copied this originally sent by Scott Logan over in the Lathes group. This was sent over a year ago, but it still applies today. " From: Scott Logan <ssl@...> Date: Fri, Nov 22, 2019 at 3:39

Actually Dennis you are working with me on this project, just from a distance. You have the knowledge and I can scrub parts pretty good.

Would be Mr. Muscle oven cleaner time at the Turk works about now.? Wish I was working with you on this.Dennis

Dennis, I think you're on it. I have an apron from a SB lathe and it has little copper tubes directing oil. The holes in the front would just dump oil on the floor without tubes. I have a bunch of

Going out on a limb here and will say there should be some felt wicks.? Without taking it apart I cant really say but the hole on top of the bushing were the carriage feed gear engages the rack on

Thanks Dennis. By the way, I'm tearing into the apron as it is like glued together with old grease or cosmoline. I thought the clutch was messed up but it's fine. So clean up time. I'm posting

With Sound Beach on the door this would mean that the machine was built some time between 1926 and 1929. Dennis Sent from Mail for Windows 10 Sent: Wednesday, December 2, 2020 6:49 AM To:

Sound Beach Conn.

Does it say New York or Connecticut. I thought all combination machines were lot 1.

You do have everything! That is a sweet set up. I've never seen an original drive, just pictures. Love it.

I forgot to check the serial number. We originally thought it was a Lot 1 but my machine is a Lot 2. The serial number is Lot 2? D 136. With the gear box it has I wonder if it is a late production

Serial numbers 229 and 238

These are my two Dalton combo machines

rumijohn, this one came from Cal. also. Do you have an original arbor for the horizontal mill? I think it's a B&S No. 11. Do you know if that is correct?? Info is mighty scarce. Have any pictures? Id

Let Dennis know your serial number!

I thought I was the only one with a combo machine. I moved mine from SoCal to Waco TX. No small feat for a 70+ year old. I still need to set it up and make some chips. Mine is the short bed version

Made my first chips on the lathe end and on the mill end. Trying out different tool holders that I have and needed to make a bushing for the draw bar for the spindle arbor. Definitely need more HP. I

You can be a brat at times :) still that is a beautiful lathe. no I did not… or didn’t see it. I have been SWAMPED with SPAM of late; today is 100 times worse with Black Friday ads…. you