开云体育

One other thing was that this lathe came equipped with the hand wheel collet closer and one 1/2 9/16 and 5/8 3C collet.? These would have been standard shaft sizes seen on the motors that were

Hi guys. So a few years ago I picked up a second TL Dalton.? This one was unlike my first one or the pattern makers lathe.? First off the lathe had a double gear reduction overhead drive so the

Hi all.? ?Well looks like Dan got things fixt as I just logged in and this is the first post I have made in a long time. As to spindle nose thread protectors I have a bunch of them and for $15 and

All good from south central Connecticut ________________________________ Sent: Tuesday, June 20, 2023 6:41 PM To: DaltonLathes@groups.io <DaltonLathes@groups.io> Subject: Re: [DaltonLathes] Having

All good from CT! J Hinton

Hi Dan. test reply. Daron

And from here in Oregon, a wee south of Dennis :)

Checking in from Florida lolTerry

Thanks, guys. Looks like it's all back up and running. Dan

Dan, I see you. Aaron

Hi Dan Larry

?Responding John Rosberg

It's the old Turk looks like things are working if I can receive post.

Replying from link on site...

Replying via email...

Perhaps one or more of you can attempt to reply to this so I can see if additional settings need to be changed? Thanks, Dan

Hi guys.? Sorry been off line for so long.? I have a new email address and now can read as well as post to the Dalton sight.? I see questions about thread protectors.? I still have a large

Take a look at the photos Daron

Take a look at the photos Daron posted in our photos section yesterday. Photo # 5600 shows the compound tool post mount at what appears to be a 30° rotation from the cross feed? ways, in the casting

Thanks John