开云体育

I can't thank y'all enough for the information. I'm ordering the Advent woofers on Monday. I need to source tweeters. Is there anything recommend? I want to get them clean and operating to get a

Your crossovers are different than what the last fifty some thousand DQ-10s came with. If you wish to go with the newer style crossover, you may need to make more modifications to what you have there

Put u to crossover calculator is inaudible

Two list one diff between the two. 5.6 vs 6.0. I used 6.0 and sonic diff if u out into crossover calculation is inaudible ?

Mab.switawi@... Thank you very much. I will make sure to add pictures as the restoration continues. Matt

I can send u the cap and resister list but should be in files . What’s email

I'm going to order the caps and other crossover parts. Is there a "cheat sheet" of what I need and any suggestions on where to purchase?

As mentioned by w e, at the time yours were made, they would have been on a sticker on the back of the tweeter baffle like you can see here: /g/DahlquistSpeakers/wikiimage/10202 As

Early models had a very small sticker on the back of one of the upper baffles, but easily could have fallen off on yours.

By the way, where would the serial number be located? I’m guessing a plaque that is long gone.

Greeting Matt, Nice save! Don't discount those CTS woofers. If you can source the proper surrounds and by all means rebuild them. As stated earlier the caps should definitely be replaced. Also give

NewOn Fri, Nov 27, 2020 at 12:06 PM, John van Son wrote: It will be a labor of love. I'm going for a mix of old and new but save as much old as possible. I have decided to save the woofer cabinets by

I saw a set for sale recently in the sn 430 range, but they only had photos of the whole speakers, not any with one of the woofers removed from the cabinet with a view of where the parts number would

Not too long ago there was an early set with those woofer which had good pictures of the backs of them . Purhaps check search under sold completed sales for them..

No problem. The tweeters were Mikrofonbau HTL-1913, which are on the rarer side, but there are sadly many parted out DQ-10s out there and so second hand tweeters and baffles aren't too difficult to

I had a similar thought. As much as I hate to see a pair go to their grave, the sum of all the new parts you'll need may far exceed the cost to buy a good used pair (not factoring in your time). These

You’ll find out very quickly that buying woofers tweeters another drivers gets to be much more expensive than just picking up a decent set for $350 and working from that. You’ll find in the file

You might be better served just buying another set in better shape off of eBay I was able to buy two sets for about 350 each. I redid call crossovers with clarity caps and mills resistors from

Jon, thank you for all the information. I will try to make them as original as possible. Question about the tweeters, I need to purchase replacements. Where and what are my questions? Then I will

Yours are one of the oldest pairs I've seen to judge by what I can tell past the dust and paint. The dusky orange dustcap on the Philips AD5060 means below serial number ~1200, the two piece brackets