开云体育

I have an interest in your woofers. Let me know if you can ship? Thanks Scott

It is correct to assume the Large Advent speaker was NOT an exact replacement. The DQ-10 woofer cone was stiffened with shellac immersion and that would change the Theil parameters. I do not know the

FYI, contrary to popular belief. The DQ-10 woofer is not identical to the Large Advent. They look the same but I believe the OEM 10 woofer has a slightly longer throw. Which means a longer wound voice

I may have an original pair of DQ10 woofers that I will sell. They do need a refoam, but they would be as close to original as you can get. Let me check and I will get back to you, that's if you are

Not the cheapest option, but a replacement DQ-10 Driver from Regnar is $188.75 each, and they recommend buying two so you have a matched set. http://dahlquistonlinestore.com/DQ-10_c_45.html There

If you find old Advents in need of refurbishing, simply speakers does an outstanding job. they totally rebuilt three original advent woofers for me and they sound amazing.

You can search for an original Large Advent speaker and have it serviced, if needed, or you can buy the *N* ew *L* arge *A* dvent from SimpliSpeakers or Amazon.? I bought the NLA for my DQ-10's as

I have done searches, but before pulling the trigger wish to have the most correct, current option. Did purchase a pair of purportedly unmolested DQ10s about 3 years ago.? Decided to make them this

To answer w e's question; No woofer obstruction at all, and the tweeter / midrange array is right at ear level when I'm on the couch across the room so it sounds great. And after I did the White Oak

They both have the same drivers. Only the depth is different. Go figure!

I have 2 DQ1's, both of which are the same dimensions. Interesting that yours are different.? Do they both have the same driver?? If so, I'd be interested in the degree of change to frequency

I own two DQ-1’s as well, but the strange thing is that is a difference in depth of about an inch between the two. Anyone else know anything about that manufacturing variance?

Wow Dave - Seriously innovative way to incorporate the home theater into the 10!! I was wondering what that mystery shadow was! This makes for a rather impressive structure that elicits the phrase

Yes, it worked out great. Here's a picture. Sorry, the original picture showed the whole stack, but when I posted it the pic got cropped on the bottom. But you get the idea :-) And by the way, the

Dave - is that to say your DQ-10's are sitting atop the DQ1W subs?

Here is a more direct link to that third tweeter replacement consideration from www.madisound.com that John Boros

Dave, Thank you, I will heed your advice, leave well enough alone! And, I, too, want to thank the board moderator for his commitment, time and effort in transferring the group, for perpetuating this

Hi John, I'm an EE and an audio enthusiast of over 50 years, for what it's worth. I highly recommend that you not change any resistors or inductors unless you know that they are out of specification.

Greetings everyone! John, thank you for your recommendations. I checked the operating temperature of the two 4 ohm resistors, during playback and they averaged just above ambient temperature. My 61

Greetings. I am new to CAS and far from being techie or audiophile expert! I recently purchased a pair of DQ 12’s in need of upgrade/ repair. My first call was to Regnar but they wanted to walk me