开云体育

You could try double sided carpet tape.Sent from my Verizon, Samsung Galaxy smartphone

Installed all new grill cloth...

Thank you. Did you pick the old glue out of the grill cloth so the glue could penetrate?

I just refurbished a set of these complete.? (And I've done hundreds of other speakers) For the badges I used hot melt glue.? On the DQ-20 I first hit it from the front, then turned the grill

I would use goop glue, but I am sure others will have their favorites

What glue do I need?

Yep an illusion. It can be quite hard to tell sometimes especially in low resolution pics. But the surrounds are glued to the front side of the Masonite instead of the back. Which throws off the dead

Thank you. All buttoned up and playing nicely.

I wouldn't pay much attention to the wire colors. It's better to momentarily hit them with a "D" cell battery connected + to the red input. And then match the cone movement on that one to the other.

Yes, it may be an illusion. With speaker magnetic on the left side, front of speaker pointing to the right, the cross section of the surround will look like this ( and not typical.

In addition, the surround is glued to the top of the masonite, not the bottom. The second picture is the way they should be. [email protected]> wrote:

The first picture shows a shadow over the top edge, they don't look concave there.

And a good one! Stare at the bottom and it will change.

NVM

I think it's an illusion.

When I removed them the black was on + Reinstalling on +. Can I get a verification for my peace of mind?

The woofer surrounds are backwards

Hi Here is the picture make me an offer please

Hi Yes I have a pair

Doesn't this require the larger metal outer ring to fit and mount properly?