开云体育

I redid two sets of Dq10 xo recently using s clarity caps from madisound and some resistors from parts express. If u send me contact I’ll forward parts lists and images with instructions. We just

Hello Paul How do you search this group? I have no idea. rgds Ian [email protected]> wrote:

Second page under “Files” I’m listed as pbizzigotti /g/DahlquistSpeakers/files/DQ-10CompanyDocuments.pdf </g/DahlquistSpeakers/files/DQ-10CompanyDocuments.pdf>

My entry under Orthobiz Should have factory schematics for the crossover values… Maybe definitive enough?? Paul

Upgrading a pair of 10's with original crossovers. When I look at all the entries in the Database for DQ10 crossover values, they seem all over the road. Is there a definitive source for making sure,

No problem.? You'll be able to see it clearly.Sent from my Verizon, Samsung Galaxy smartphone

This is the published impedance curve for the DQ-10 from their literature:

Interesting! If possible Ed make a notation of what it is at 60hz and 120hz. Thx, DD

I'll measure and post the impedance tomorrow, after I measure it.? Because the woofer is a sealed design there will only one rise at bass resonance.Sent from my Verizon, Samsung Galaxy smartphone

I need some advice. The DQ-10 has a published nominal impedance of 8 Ohms. I understand this to be an average number. ?Somewhere along the line, I’ve picked up that the actual impedance of the

Whoa - before you start unsoldering stuff, pop the grills off and do a thorough check of all the surrounds, cones, and wire connections to the terminals of the drivers. Play something that generates

Unsolder all the speaker wires at speaker and then run one at a time to find the culprit

Greetings, I have a pair of DQ-10's (I am the original owner) that I updated with new Regnar crossover boards last year.? They sound great with the exception of a crackle at certain mid-range

Trust me on this. You want to hear a pair of the 10's that have new or fairly new capacitors in the crossovers. I have owned several Dahlquist models and the 9's (not the 9c's) and the 10's rule

The dh 500 is a great amp to drive them with

Thank you everyone...all your input is appreciated. @Dina...I will order those cap values. thank you

2/6.0 ufclarity blue, 1-6.8uf,1-15uf, 1-8.2 uf,1-80 or 82 uf, don’t mess with piezo caps they are good hi grade film caps and not bad. Just change to mills resisters. Just double the order for both

When I look at these boards I see two 6.0 (1060) and one 6.5 (1065) ?is that correct?

Found them! Posts #789 and #790.. Paul

Ummm,,,,I don’t seem to be able to search under my name. Don’t know if the old stuff is still available. I was just a fly-on-the-wall typing the bills of lading. Paul