Re: Powered sub recommendation to match with DQ-10's
Sealed enclosures are much more accurate for stereo listening and some ported offer a lower frequency but are really for theater or movie surround systems! Bower & Wilks has a small 10” sealed that’s reasonably priced.
?
|
Isn’t that the Advent that’s a 10” in a 12” frame?
|
Raleigh NC - anyone interested?
|
He’s doesn’t reply asked for location earlier. If near MD I’d take them !
On Fri, Jul 26, 2024 at 9:48?PM S&B Enterprises, LLC via <mphsneon= [email protected]> wrote:
Were are they located,if one has not been spoken for. Thanks
On Friday, July 26, 2024 at 06:37:14 AM CDT, SpongeSound < wm.edmiston@...> wrote:
I have two I can sell in great shape for their age. Off white grill cloth from Guilfords of Maine (sound transparent)
|
Were are they located,if one has not been spoken for. Thanks
I have two I can sell in great shape for their age. Off white grill cloth from Guilfords of Maine (sound transparent)
|
|
|
I have two I can sell in great shape for their age. White grill cloth from Guilfords of Maine (sound transparent).
?
For the record, I'm not thrilled about parting with them BUT we recently moved and they simply won't fit in our space.
|
Want to take a trip to?Milwaukee? you might hagle with the guy
Greetings!? Looking for a DQ-1W to match an existing.? Currently using one, with an LP1, and would like a second...? in good shape.? I'm located in Louisville, KY, so within 300 hundred miles would make for a day trip.? ?Thanks all for your consideration.?
|
I have a M&k bottom end subwoofer I would sell for 200. Bill
Greetings!? Looking for a DQ-1W to match an existing.? Currently using one, with an LP1, and would like a second...? in good shape.? I'm located in Louisville, KY, so within 300 hundred miles would make for a day trip.? ?Thanks all for your consideration.?
|
Greetings!? Looking for a DQ-1W to match an existing.? Currently using one, with an LP1, and would like a second...? in good shape.? I'm located in Louisville, KY, so within 300 hundred miles would make for a day trip.? ?Thanks all for your consideration.?
|
Onkyo RX-50 Receiver - anyone using it with the DQ-10's?
Curious as I may go with this unit. Has Zone 2 and Zone 3 pre-outs so I can connect it directly ( as a preamp) to my two Hafler amps, OR, connect either pair of speakers directly to the Onkyo since both zones can also serve as powered outputs. Hefty price tag but would like to chat with any owners out here before pulling the trigger.
|
I have a Dahlquist problem, all of my other floor standing speakers have left the building and only a pair if DQ-20s and M-905s remain along with a pair of DQM-9s that just rolled in with a punched in woofer.??
Does anyone have a spare? Needing foam is cool with me.?
Matt in Washington State, USA
|
Re: DQ-10 and DQ-20i in southwest Connecticut
The DQ-10 has been sold too.
On Friday, April 26, 2024 at 08:39:02 PM EDT, Jeff Katz via groups.io <qstieee@...> wrote:
The DQ-20i has been sold.
On Thursday, April 25, 2024 at 08:12:06 AM EDT, Jeff Katz via groups.io <qstieee@...> wrote:
You should have heard via direct e-mail by now from the person who is helping me sell them.
On Wednesday, April 24, 2024 at 08:05:17 PM EDT, Eric Beckenstein <ebeckenstein@...> wrote:
I would love to hear them both… I currently have the DQ 12’s and remain torn between getting the 20’s or the 10’s.?
Thanks,? Eric Beckenstein,
On Apr 23, 2024, at 2:55?PM, Anthony Ita via groups.io <aita1640@...> wrote:
? Hi Jeff, I’m interested in the DQ-20i. If still available, will buy and pay shipping to my home in metro Atlanta. Let me know if that works for you. Vintage Dahlquist DQ-10 mirror image pair - $500 (Stamford)
------------------------------------------------------------------------
condition: good
make / manufacturer: Dahlquist
model name / number: DQ-10
Dahlquist DQ-10 mirror image pair with factory center post stands, 8/10 condition.
Latest upgraded crossover design. Sound quality and imaging are excellent with these phase and time aligned Left and Right specific speakers.
Specifications:
Type: 5 way, 5 driver loudspeaker system
Frequency Response: 35Hz to 27kHz
Recommended Amplifier: 60 to 200W
Crossover Frequency: 400, 1000, 6000, 12000 Hz
Impedance: 8?
Bass: 1 x 10" cone
Mid-bass: 1 x 5" cone
Mid range: 1 x 1.75" soft dome
Tweeter: 1 x 0.75" dome
Super Tweeter: 1 x piezoelectric element
Weight: 50lbs
As a bonus, there is an original set of boxes included, down to the packing material, addressed to a dealer in New Haven, CT.
Nice set of Dahlquist DQ20i
--------------------------------
In rare white grille cloth / oiled oak, very good condition, ready to go. These look very sharp compared to the standard black. No issues, and they sound like they should. This is the last model designed by John Dahlquist. If you are looking at these, I probably don't have to tell you much. Woofers re-foamed three years ago by the best, Bill Legall at Miller Sound in PA. As you know, these always place high on lists of top vintage speakers. $495 cash please.
For either speaker, can meet you or you can come and hear them. Will demo for you with audiophile gear. Pick up only, in Stamford, CT. These are at a friend's place, since there are more audiophiles in his area, which is close to Westchester, NY. He will meet with you and demo and conclude the sale. You may bring your own music - he can play almost any media. Contact ajpennella@...
Thanks for looking.
|
|
|
Re: DQ-10 Walnut Side Panels
Mine caliper to 20mm as well.
|
Re: DQ-10 and DQ-20i in southwest Connecticut
The DQ-20i has been sold.
On Thursday, April 25, 2024 at 08:12:06 AM EDT, Jeff Katz via groups.io <qstieee@...> wrote:
You should have heard via direct e-mail by now from the person who is helping me sell them.
On Wednesday, April 24, 2024 at 08:05:17 PM EDT, Eric Beckenstein <ebeckenstein@...> wrote:
I would love to hear them both… I currently have the DQ 12’s and remain torn between getting the 20’s or the 10’s.?
Thanks,? Eric Beckenstein,
On Apr 23, 2024, at 2:55?PM, Anthony Ita via groups.io <aita1640@...> wrote:
? Hi Jeff, I’m interested in the DQ-20i. If still available, will buy and pay shipping to my home in metro Atlanta. Let me know if that works for you. Vintage Dahlquist DQ-10 mirror image pair - $500 (Stamford)
------------------------------------------------------------------------
condition: good
make / manufacturer: Dahlquist
model name / number: DQ-10
Dahlquist DQ-10 mirror image pair with factory center post stands, 8/10 condition.
Latest upgraded crossover design. Sound quality and imaging are excellent with these phase and time aligned Left and Right specific speakers.
Specifications:
Type: 5 way, 5 driver loudspeaker system
Frequency Response: 35Hz to 27kHz
Recommended Amplifier: 60 to 200W
Crossover Frequency: 400, 1000, 6000, 12000 Hz
Impedance: 8?
Bass: 1 x 10" cone
Mid-bass: 1 x 5" cone
Mid range: 1 x 1.75" soft dome
Tweeter: 1 x 0.75" dome
Super Tweeter: 1 x piezoelectric element
Weight: 50lbs
As a bonus, there is an original set of boxes included, down to the packing material, addressed to a dealer in New Haven, CT.
Nice set of Dahlquist DQ20i
--------------------------------
In rare white grille cloth / oiled oak, very good condition, ready to go. These look very sharp compared to the standard black. No issues, and they sound like they should. This is the last model designed by John Dahlquist. If you are looking at these, I probably don't have to tell you much. Woofers re-foamed three years ago by the best, Bill Legall at Miller Sound in PA. As you know, these always place high on lists of top vintage speakers. $495 cash please.
For either speaker, can meet you or you can come and hear them. Will demo for you with audiophile gear. Pick up only, in Stamford, CT. These are at a friend's place, since there are more audiophiles in his area, which is close to Westchester, NY. He will meet with you and demo and conclude the sale. You may bring your own music - he can play almost any media. Contact ajpennella@...
Thanks for looking.
|
Re: Powered sub recommendation to match with DQ-10's
I'm sorry to reply so late, I'm guessing you already made a decision and I'm curious to hear what you chose and how it has performed.?
Personally, my Dahlquist are on my three season porch and get double duty. Most of the time they only play music, but 2-3 nights a summer I host neighborhood movie nights and set up a projector.?
This year, I went big and bought two PB-2000 subwoofers. I think the sealed version would be better for music, but I wanted the big bass for movie nights and don't mind it thumping. I can turn the bass up or down pretty easily if I think it's "too much."
In your shoes, I would recommend buying a ported SVS subwoofer (model depends on your budget) and try it out. If you like it with music, you can get a second one. If not, the sealed version may be better for music only. If space is a limitation, just go ahead and get the sealed version.
Unfortunately I have no experience with the other subwoofer you mentioned, but I assume you've already made a purchase.?
|
Re: DQ-10 Walnut Side Panels
Hi Dave - thanks so much. ? Cheers, ? 骋补谤谤测… ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Dave B
Sent: Friday, April 26, 2024 9:54 PM
To: [email protected]
Subject: Re: [DahlquistSpeakers] DQ-10 Walnut Side Panels?
Hi, ? I’ve managed to acquire some solid walnut for the side panels and have made a template from the metal grilles. The walnut is 50 mm thick so I’ll need to have them ripped to size.. ? Can I impose and ask if you could measure the thickness of the side panels and let me know,, ? Many thanks in advance.. ? 颁丑别别谤蝉… ? ? I'd just make a replacement set if I was in that situation. Main hassle would be finding a set to trace the profile. Sent from my Verizon, Samsung Galaxy smartphone
|
Re: DQ-10 Walnut Side Panels
toggle quoted message
Show quoted text
Hi,
?
I’ve managed to acquire some solid walnut for the side panels and have made a template from the metal grilles. The walnut is 50 mm thick so I’ll need to have them ripped to size..
?
Can I impose and ask if you could measure the thickness of the side panels and let me know,,
?
Many thanks in advance..
?
颁丑别别谤蝉…
?
?
I'd just make a replacement set if I was in that situation. Main hassle would be finding a set to trace the profile.
Sent from my Verizon, Samsung Galaxy smartphone
|
Re: DQ-10 Walnut Side Panels
Mine scale .800 thick with my Berber calipers?
On Fri, Apr 26, 2024 at 12:40?AM Garry Haseman via <garry_has= [email protected]> wrote: Hi, ? I’ve managed to acquire some solid walnut for the side panels and have made a template from the metal grilles. The walnut is 50 mm thick so I’ll need to have them ripped to size.. ? Can I impose and ask if you could measure the thickness of the side panels and let me know,, ? Many thanks in advance.. ? 颁丑别别谤蝉… ? ? I'd just make a replacement set if I was in that situation. Main hassle would be finding a set to trace the profile. Sent from my Verizon, Samsung Galaxy smartphone
|
Bill Meyerhoff
SpongeSound