开云体育

Hey nobody ever said you can't remove the old ferro and install new. I mean really, is buying unmatched drivers, in unknown condition, from whatever source the solution? Why not if possible fix the

Have you considered an early speaker swap using ribbons? Also, recently heard some amt style from Parts Express attached to some DQ10s and it was a bit more open and airy.? A pair of those shipped

Interesting, those are the first I've noticed with orange drop caps.

45 years ago I listed after the D

About 45 years ago I listed after a pair but bought DCM Timewindows instead- also great speakers but chosen because they were a bit less $. Last month I was gifted a pair that were not used for 30

Watch eBay. The Vifa/Tymphany D25AG-05-06 was used in quite a few different makes and models back in the '90s. So, used, but working examples show up with some regularity. Just be sure you get the

We're kindred spirits Kevin. I have my cream colored DQ-10's hooked up to a TX-SR805! Bet you could find the mic on eBay. Rather old item so maybe someone has an orphaned one to sell, although not

Hi Matt, Not sure if they have ferrofluid or not. But if so it has likely hardened over time. Which causes exactly what your experiencing. So you might consider taking them apart and removing as much

Hello, It's been a long time since my DQ-10's were up and running.? Attached is a picture of them in my newly built out pool room / soon to be bar.? Pool table is a late 1950's AMF Grand Prix,

That’s the Regnar site. I had great luck 15 years ago (or more) working with Joe. No recent experience. The website has been redesigned a few times and is still such an EYESORE Paul

Buddy of mine just picked up a pair of DQ-28 in great shape. One tweeter is under preforming. It works but does not have full range of highs. We swapped it with the working tweeter and it is NOT the

Close, and hard to tell...

Go original all the way. I own a set of klipschorns and they sound amazing. My only others are DQ 10's and I can hardly tell the difference. The K-horns are a little bit more articulate in the mids

I found the spec page on this site but really want to know a little about them. They are as close to new condition as you can get. I paid $275 for the pair and picked them no cost for shipping. They

Had a chance to take a better look at your cleaned up pics and it is looking like you're dealing with a bass leg similar to that found in this later model (figure the single 80?F cap stands in for

I emailed you directly. I am interested. Thank you.

My first post after lurking around for awhile. I’ve got a pair of tweeters on their mounting boards. I replaced them with the scanspeak tweeters with homemade boards and thought they were a huge

For the tweeter, you're looking for a pair of these: /g/DahlquistSpeakers/wiki/23810 However, you're going to need more than just that. The baffles the tweeters were mounted to are

If u cans gently turn all the caps you should be able to obtain equal value ones in new form?

Here is a better shot. A hairdryer and some Goof Off remover and I've made a dent in the black paint removal.