开云体育

Is there a way to display more than the 10 memories per bank? I would love to see two bank or 20 memories or have this customizable if possible. Mike W0MU

> I was trying to recover a LOTW confirmation on a single contact. I did the CTRL sync QSO's and LOTW is reporting over 100k qso's. DXK log says 76k. Is the 100k that LOTW states include other calls I have used such as DXpeditions? I am unsure where I would have made 30k qsos that got uploaded to LOTW without using DXK. I believe I can create a blank new log and then import from LOTW and find out? BTW inspecting 100k qsos takes a very long time. Mike W0MU

I am importing logs from wsjtx, jtdx, mshv etc. Most of the time I use jtalert to log to DXK at the same time but occasionally their are hiccups. When I do an import I usually get an unaccepted number of dupes. I am not sure what boxes to check for a cleaner import. I am using check duplicates on import +/- 10 mins and merge info. I might of had consider grid squares checked. Maybe I need to increase the minute range. Mike W0MU

Hi everyone, I want to create a new database in DxKeeper to add QSOs that I made in a different DXCC entity than my QTH. I am going down the path Config>(Log file) New>entering filename and then getting an error message "unable to create log database (filename)". I tried 3-4 times and every time getting the same message. Searching the errorlog I found the entry: "program error 48 in module DXLogModule.CreateLog, State = 7, Pathname = C:\DXLab\DXKeeper\Databases\J45P.mdb: Error in loading DLL" If anyone could help... Thanks! Panos 73 de SV8PMM

Dxkeeper and Spotcollector - no text displayed DXKeeper errorlog 2025-04-24 09:44:11.987 > I = 126 2025-04-24 09:44:11.987 > DXLogMain.LogGrid.Columns.Count = 126 2025-04-24 09:44:47.012 > program error -2147221164 in module DXLogModule.InitializeLogLayout, State = 2: Class not registered 2025-04-24 09:44:49.137 > program error -2147221164 in module DXLogModule.FormatLogGrid, State = 2: Class not registered

Hi DXLab, I've done some of my own "scripts" scanning WSJT-X adi files (creating import *.adif-files) and I have a wish that that I could import those in DXKeeper from directly via a command line instead via DXKeeper menus (works fine..). It would be a another interface to communicate with DXKeeper... like cmd: DXKImport.exe /f adif-file [optional parameters]. If this is doable I would be a lucky guy ! Best rgds/73 SM0FGT - Keijo

Thanks, but I just wanted to say how well the gateway program works and how it can save users time and effort. Jim N7US Sent from my Verizon, Samsung Galaxy smartphone

Should I be seeing SP Probability and LP Probability on 6 meters, or is this strictly 10-80 meters? Thanks, Earl / KD5XB Sent with Proton Mail secure email.

Sorry for the log email. I wanted to get what little info I had in my head out into the email. Going to include both for logging imports. I think it is the same issue for both. I know it has to be me (usually is, ask the XYL). The more that I do and learn, the more I find is not set up. Some needed, some suggested and of course personal preferences. I'm starting to understand some of Dave's logic and thoughts (not always). The part that keeps biting me, is the log imports. I've used the gateways for N1MM and/or WSJT-X/JTAlert and etc.. Every once in a while, I will see a message that a contact was not logged (sometimes not at all). Sometimes I make a note, other times I don't. It is a matter of my "free time". I know this isn't good!! I thought when you QSY to a Digital mode, the program could/will start (I guess not). I need to reread things. I also need to make sure my settings are correct. I don't think I have it all correct. Colors and a few comments are not totally setup. Problem is, when I'm testing I want to chase DX. It is a really bad habit!! When you decided to "import" the log after the contest or time on the air (WSJT-X). I have found that the QSO that was logged and the QSO that was imported have the same DATE/TIME, but are different. From what I can tell, the differences can be Name/Address/QSL MGR/Uploads to ClubLog and etc. To me, if the Call, date, time, band, mode, exchange are all the same, the QSO should be the same. I do have the "2 minute" difference checked/setup. I have the checked merge dupes checked (should it be unchecked?). What else am I missing? I decided to see if I can get the WSJT-X integration to work with DXKeeper/Spot Collector and etc. So far, It works. I'm not sure it is quite as quick or convenient, but it good. OK, I used the N1MM/DXKeeper gateway for the WPX contest with out any issues. This past weekend, I used the gateway for the ARRL DX CW contest. It looks like I'm missing some contacts in my log. I know that I have X# of Qs. When I filter my log, I see X# of Qs and the number doesn't match! When I look into the N1MM/DXKeeper Gateway, I see that there is a bunch of errors. I can paste the whole error log, but not a lot of need. Here is some of it: Set up the program prior to heading out to dinner. 2025-02-14 10:56:22 > N1MM-DXKeeper Gateway version 1.2.1 2025-02-14 10:56:22 > App.Path : C:\DXLab 2025-02-14 10:56:22 > App.exe : N1MM_DXK_GW 2025-02-14 10:56:22 > Module : C:\DXLab\N1MM_DXK_GW.exe 2025-02-14 10:56:22 > Operating System : Windows 10 Enterprise (64-bit) build 26100 2025-02-14 10:56:22 > Locale ID : 1033 (0x409) 2025-02-14 10:56:22 > ANSI CodePage : 1252 2025-02-14 10:56:22 > OEM CodePage : 437 2025-02-14 10:56:22 > Country : United States 2025-02-14 10:56:22 > Language : English 2025-02-14 10:56:22 > DecimalSeparator : . 2025-02-14 10:56:22 > ThousandSeparator : , 2025-02-14 10:56:22 > DXLab Apps : 2025-02-15 03:05:51 > Monitors : 1 2025-02-15 03:05:51 > Monitor 1 2025-02-15 03:05:51 > width : 3440 2025-02-15 03:05:51 > height : 1440 2025-02-15 03:05:51 > dimensions : (0, 0)-(3440, 1440) 2025-02-15 03:05:51.027 > TCPClientModule.SendCommand unable to connect with 10 seconds, TCPsocket.State = Closed 2025-02-15 03:05:51.036 > N1MM_DXK_UI.InformUser: TCP log directive rejected: Error: unable to connect 2025-02-15 03:05:51.045 > N1MM_DXK_UI.InformUser: DXKeeper did not log QSO with TM2Y on 160M in CW 2025-02-15 12:40:15.820 > TCPClientModule.SendCommand unable to connect with 10 seconds, TCPsocket.State = Closed 2025-02-15 12:40:15.839 > N1MM_DXK_UI.InformUser: TCP log directive rejected: Error: unable to connect 2025-02-15 12:40:15.876 > N1MM_DXK_UI.InformUser: DXKeeper did not log QSO with KP4AA on 20M in CW 2025-02-15 12:49:39.333 > TCPClientModule.SendCommand unable to connect with 10 seconds, TCPsocket.State = Closed 2025-02-15 12:49:39.350 > N1MM_DXK_UI.InformUser: TCP log directive rejected: Error: unable to connect 2025-02-15 12:49:39.360 > N1MM_DXK_UI.InformUser: DXKeeper did not log QSO with ES7A on 20M in CW 2025-02-15 13:05:15.331 > TCPClientModule.SendComm

With my spots database having over 3500 entries, the only "wanted" items are DXCC items. No continents, no zones, etc. I'm finding it hard to believe that not even ONE entry is on a band-zone or band-continent that I need. What have I done / not done here? Thanks, Earl / KD5XB DM84 Currently listening on 50.260 MSK144 e e Sent with Proton Mail secure email.

? Hello Dave, I have been using DX Keeper and other DX Labs programs since midyear 2020 with great success and have never had a problem whatsoever. I am totally sold on the DX Lab Suite and have recommended it to many of my friends. Last year I submitted for the DX Marathon as Mixed Formula 100W, but I also kept tabs on my Challenge progress from inside DX Keeper just because it was fun. This year in 2025, I am pursuing the DX Marathon Challenge. Periodically I check my progress from inside DX Keeper using the Check Progress Tab and then clicking the Progress Button in the DX Marathon Challenge Section. This has been working every time without fail both last year and this year until recently. I'm not really sure when it stopped working. I figured I had pushed some button wrong and hadn't paid much attention to it but then yesterday I decided to delve into it and see what I might have messed up. What happens is, when I push the button to run the report nothing happens, other than the DX Keeper Title Bar displaying the following Message: See DXKeeper Errorlog.txt. I have tried almost every other Progress Report on the page, and they all seem to work just fine. When looking at the DXKeeper Errorlog.txt, it has two errors that I can see that are repeatable. Here is what is generated into the Error Log every time I try to run the Progress report: 2025-04-22 20:42:25.424 > program error 48 in module MarathonModule.GenerateMarathonProgressReport, State = 10: Error in loading DLL 2025-04-22 20:42:25.432 > MarathonCountryCodeIndex = 0 2025-04-22 20:42:25.440 > I = 1001 2025-04-22 20:42:25.447 > J = 21 2025-04-22 20:42:25.453 > theCode = 0 2025-04-22 20:42:25.459 > theZone = 0 2025-04-22 20:42:25.466 > regionID = 0 2025-04-22 20:42:25.472 > theBandField = 0 2025-04-22 20:42:25.479 > theModeField = 0 2025-04-22 20:42:25.485 > CounterIndex = 0 2025-04-22 20:42:25.494 > program error 91 in module DXLogMain.MarathonProgressCmd_Click: Object variable or With block variable not set I went back in the log, and it appears that the first time these errors started showed up was on April 15, 2025, with Version 17.9.9. I am running up to date Windows 11 on a Dell i7 Computer. I am going to need help fixing this since this is beyond my paygrade and training. It seems like something may have gotten corrupted. Thanks for the fantastic software and for the excellent support! 73! David Simms (N4IW) Lynchburg, VA -- Thanks, David, N4IW

I'm not changing transceivers yet almost every time I launch Commander the value set in Command interval (ms) disappeared. Does anyone know why that is? 73 es dx Gust ON6KE

When posting a spot by right-clicking on the call in DXKeeper the spot is posted with the transmit frequency. I think it would be more beneficial to post the receive frequency. Tuning to the transmit frequency is of little value. I often see spots posted using the transmit frequency then I must determine the correct receive frequency. For example, if the station was spotted with a frequency of 7054.7 I don't know if the receive frequency is 7054, 7053, etc. Obviously, this will not help me but I think it would help others who see the spot. Just a suggestion. -- Tom-KQ5S

GM Group, I'm planning on moving DXLabs over to my new Win11Pro PC. Is loading the previous registry settings onto the new PC, directory-specific? In other words, do I have to follow the c:\DXLab\Launcher\Workspace\RelocationBackup or can I launch the RelocationBackup from any directory? TIA 73 de K3SSB Tom G, Sr.

Hello, I changed my callsign and would like the QSOs I made with the old callsign to be counted. What do I need to do to do that? Tom YU3TA/YU0X

About the application's affinity being transient. There is at least one way to set the affinity with DXLab Launcher. Here is the command line that I use to start WSJT-X in the Apps Started Before DXLab Apps tab: C:\WINDOWS\system32\cmd.exe /C start /affinity 0x7 C:\Users\Public\wsjtx_2_7_0\bin\wsjtx.exe This sets the affinity to processors 0, 1 and 2. The hex code 0x7 is a bit mask where LSB represents CPU0, the next bit CPU1 and so on. So for example for CPUs 2 and 3 you would use hex code 0x0C. Here is how I start SpotCollector from the Apps Started After DXLab Apps tab: C:\WINDOWS\system32\cmd.exe /K start /affinity 0x8 c:\Users\Public\DXLab\SpotCollector\SpotCollector.exe I use the option /K, which leaves the window for cmd.exe running, beacuse otherwise I couldn't terminate SpotCollector with the Launcher. Termination method Close would need a static main window caption, which SpotCollector doesn't have and the kill method needs a running parent process (cmd.exe) for the Termination to work. So I choose the kill method in the Launchers Termination box. I have of course disabled SpotCollector in the Launcher's DXLab Apps tab. If I need to start SpotCollector manually I have to start it from the Apps Started After DXLab Apps tab's Start button, if I want to have the affinity set. -- 73 de Tapio at station OH3HN On Sat, Apr 12, 2025 at 09:20 PM, Dave AA6YQ wrote:

The IOTA tag displayed in QRZ's entry for FK8HM's is "EU-148 Languedoc-Roussillon Region group", but the LoTW confirmation I received for a QSO made earlier today specifies OC-032. Neither the BigCTY nor the ClubLog exception lists include an entry for FK8HM; thus, I suggest manually adding an entry to DXView's Override List specifying that FK8HM is in OC-032. 73, Dave, AA6YQ

... via the Databases tab of DXView's Configuration window. Terminate DXKeeper, WinWarbler, and SpotCollector before directing DXView to update these databases. Because the GridDXCC database has been updated, you must also terminate and restart DXView after completing the update. The GridDXCC database is what enables DXView to update it's Main window's "Location" box when you double-click in its World Map. This update of the Grid DXCC database by Joe W4TV improves the location information for 26 DXCC entities and U.S. States. Thanks Joe! 73, Dave, AA6YQ

It appears that I have worked a few DX stations in CW that I don’t have confirmed or verified. I am attempting to write a SQL expression that searches for mode of CW and NOT a US QSO and it the QSO was between January 1, 2015 and January 1, 2025 (and that part works it is that last part of the expression that I can’t get right). Anway, this is what I have so far: (mode='CW') AND (DXCCPrefix <> 'K') AND ((QSO_Begin > #01-01-2015 00:00#) AND (QSO_End < #01-01-2025 00:00#)) AND ((APP_DXKeeper_LotW_QSL_RCVD<>'V') OR (QSL_Rcvd <> 'V')) I don’t get any errors. I want it to now list only DX stations that have not been verified. I realized that is “confirmation” but the ‘V’ appears in the LoTWR or QSLR columns. Which explains why I have that part at the end. I looked at the Help (Log Items) at file:///C:/Ham%20Programs/DXLab/DXKeeper/Help/Items.htm and it shows an item App_DXKeeper_QSL_Verified but I couldn’t figure out what to do with it since it appears one of its values is ‘V’, but when I tried it as a SQL expression I got an error. What am I missing? 73, Bob KB4CL

I get the message "attempt to open the log in E:\ZF2LC_2025-03-21_14-57-00.mdb failed The Microsoft Jet database stopped the process because you and another user are attempting to change the same data at the same time." What does this mean? Jim W2SM