On 2/26/2016 9:41 PM, K4ia K4IA@... [dxlab] wrote:

I like cards so, at 13 cents and no hassles, I QSL everybody

Buck
k4ia K3 #101
Honor Roll 333
8B DXCC

On 2/26/2016 9:23 PM, Danny Douglas n7dc@... [dxlab] wrote:
>
>
> Figured that would be the case. Yeah, the only thing better (besides
> easier to do the outgoing) is the time. I suspect, with Global they
> might even send them out faster than the buro does from ARRL. The
> faster out, the faster in, or so saything the Sun gods. I might try
> that on a batch here shortly. These days, I am just answering incoming
> cards, since pretty much worked everyone needed on the bands, and if
> something comes up I do need, it will be DIRECT anyway. Certainly
> cheaper than buying ink every other month, and easier than cutting up
> card stock here, the way I do it now. I have always made my own from
> this QTH, but it is getting far and few between when I get around to
it now.
>
> ----------------------------------------------------------
> *From: *"K4ia K4IA@... [dxlab]" <dxlab@...>
> *To: *dxlab@...
> *Sent: *Friday, February 26, 2016 9:15:32 PM
> *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
>
> I don't notice any difference between Global and when I did it all
> myself. Actually I upload to Global more often because I don't have to
> wait for a big batch and I don't have to find the time to do all the
> sorting etc to send to ARRL. So maybe the Global way is faster. The
> receiving DX has no way of knowing how he got the card. It just comes
> through his buro like before.
>
> Buck
> k4ia K3 #101
> Honor Roll 333
> 8B DXCC
>
> On 2/26/2016 8:06 PM, Danny Douglas n7dc@... [dxlab] wrote:
> >
> >
> > I dont mind much as to how long they take to get herre, just that they
> > do. But still wondering wht the precentages are via global.
> >
> > ----------------------------------------------------------
> > *From: *"'Buck. K4ia' K4IA@... [dxlab]" <dxlab@...>
> > *To: *dxlab@...
> > *Sent: *Friday, February 26, 2016 7:09:15 PM
> > *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> >
> > You can't blame Global if someone decides to stop answering buro cards
> > or if your buro takes forever to get to you. At 13 cents a card I can't
> > get too upset if they don't respond
> >
> >
> >
> > K4ia
> > Buck
> >
> >
> > -------- Original message --------
> > From: "Danny Douglas n7dc@... [dxlab]" <dxlab@...>
> > Date: 2/26/2016 15:32 (GMT-05:00)
> > To: Stephen <dxlab@...>
> > Subject: Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> > Buck, had thought about doing that too, But, I see more and more
> > notices about this guy and that guy, no longer responding to Buro
cards,
> > and wonder just how much waste of money and time it is to try that way.
> > Any idea as to the percentages of outgoing for which you eventually get
> > a response?
> >
> > ----------------------------------------------------------
> > *From: *"Buck K4IA@... [dxlab]" <dxlab@...>
> > *To: *dxlab@...
> > *Sent: *Friday, February 26, 2016 11:34:33 AM
> > *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> > I would heartily recommend GlobalQSL.com for bureau cards. They print
> > your full-color custom-designed card, including the QSO information and
> > ship it to the foreign bureau for about 13 cents a card. DxLab will
> > generate the ADIF file you send to them. You can upload hundreds of
> > QSLs within a few minutes. No fuss, no muss, no printing, no ink, no
> > labels, no postage, no sorting and you don't have to be an ARRL member.
> >
> > K4ia
> > Buck
> > Honor Roll 334
> > 8BDXCC
> >
> > On 2/26/2016 11:01 AM, ' Dave AA6YQ' aa6yq@... [dxlab] wrote:
> > > I've been happily using an HP LaserJet 200 M251 to print QSL cards.
> > >
> > > Welcome back, Jose!
> > >
> > > 73,
> > >
> > > Dave, AA6YQ
> > >
> > > -----Original Message-----
> > > From: dxlab@... [mailto:dxlab@...]
> > > Sent: Friday, February 26, 2016 8:32 AM
> > > To: dxlab@...
> > > Subject: [dxlab] PRINTER RECOMMENDATIONS
> > >
> > >
> > >
> > > Good Morning,
> > >
> > >
> > >
> > > I know I have seen this thread before, but alas, I am unable to
> > locate it.
> > >
> > > I am finally getting station back together and still fighting my
> > township for towers…but …
> > >
> > > In preparation for returning to the airwaves, I am catching up on QSL
> > cards.
> > >
> > >
> > >
> > > My Lexmark Optra S 1855 (best QSL printer I have ever used) has
> > retired and I need to replace it.
> > >
> > >
> > >
> > > I process a LOT of QSL cards and like to print DIRECTON ON the back
> > of my QSLs cards (not labels).
> > >
> > > I EXPORT my QSO data from DXLab Suite to BV7 to print up to 18 QSOs
> > on the back of each QSL (if needed J).
> > >
> > >
> > >
> > > If anyone prints directly on QSL cards, I would like to hear from you
> > regarding what printer you are using.
> > >
> > > I prefer to be able to front load my QSL cards.
> > >
> > >
> > >
> > > Comments and suggestions more than welcome!
> > >
> > >
> > >
> > > Thanks Team!
> > >
> > >
> > >
> > > Jose – N4BAA
> > >
> > > Ex: KG4SB, YI9BAA, VP5BAX, N1BAA, WD4LAH
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > > Posted by: " Dave AA6YQ" <aa6yq@...>
> > > ------------------------------------
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo Groups Links
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 11:10 AM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)

Hi Folks:

A related question here -- I understand using buro cards for DX (from the US) but is there a way to do buro cards within the usa also?? I have some I'll be sending direct, but I also have a bunch that I just want to send buro cards to

+++ Yes: see the "Outgoing QSL Service" section of

<http://www.arrl.org/outgoing-qsl-service>

????? 73,

????????????? Dave, AA6YQ




------------------------------------
Posted by: "Dave AA6YQ" <aa6yq@...>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
??? http://groups.yahoo.com/group/dxlab/

<*> Your email settings:
??? Individual Email | Traditional

<*> To change settings online go to:
??? http://groups.yahoo.com/group/dxlab/join
??? (Yahoo! ID required)

<*> To change settings via email:
??? dxlab-digest@...
??? dxlab-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
??? dxlab-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
??? https://info.yahoo.com/legal/us/yahoo/utos/terms/

From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:18 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)

?

+++ More AA6YQ comments below

?

From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:26 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)

Ok, Dave, but then link you provided said you could not.? Thanks for checking.

?

+++ If the rules say you can’t, then you can’t. Perhaps, as Iain N6ML suggested, I was remembering confirmations I sent via the buro for 8P9RY QSOs.

?

?????? 73,

?

?????????????? Dave, AA6YQ

?

?