Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
DXView 1.2.5 is available
|
Dave, AA6YQ
The primary purpose of this release is to correct the defect in Hygain DCU
toggle quoted message
Show quoted text
rotator support reported by Julio below. I learned from Ed at DataMatrix (the developers of ProLog) that the "set bearing" and "move rotator" commands must be separated by at least 150ms, which explains why clicking the SP button once fails, but clicking it twice succeeds. Without a Hygain rotator, my testing is limited, so Julio please let me know whether this eliminates the problem. If anyone else is using a Hygain rotator -- with either the Rotor EZ or standard Hygain controller -- I'd also appreciate a works/fails report. While I was in the code, I added direct latitude/longitude entry, and added the mechanism required for interoperation with PropView. This release is available by downloading - store it in your DXView folder and execute it. You can then run the extracted DXView125.exe . 73, Dave, AA6YQ -----Original Message-----
From: Julio [mailto:jperalta@...] Sent: Monday, March 12, 2001 18:09 PM To: Bernstein, Dave Subject: Re: DXView Dave I hope you don't construe this as complaining, at this point my comments are to help, as I understand you are doing some beta testing or something of that sort. When I have the main DXView window up and I set a rotor heading either by adding a callsign or clicking on a country it requires 2 clicks of the mouse on the SP or LP button to start the rotor in motion. I've even tried the clicks as long as 10 seconds apart and it will still activate the rotor action. One click will not start the rotor! I'm not sure if this is how you wanted it to work, but I suspect not. Thanks again, 73's Julio |
to navigate to use esc to dismiss